Question about Pioneer PDP-4270HD 42 in. Plasma Television

Open Question

How do you use pioneer plasma display model pdp-4300 as a tv

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

HDTV GURU
  • 261 Answers

SOURCE: pioneer pdp-4300

It sounds like to me that either a capacitor blew up or the powersupply failed. Let me know the serial # and the other model # located on the back and i can assist you more. Possibly a driver IC on the ribbon cable going to the panel might have popped, which is about the size of a postage stamp and can be repaired fortunately, but it isn't cheap. If you do it wrong, the panel is ruined for good. If you do it correctly your set is fixed. Fortunately for you i know the boys over in O.T.S in Chicago which can assist me in helping you. Let me know if i can be of anymore help for you. I am located in Louisville, Ky. Thank you Jay

Posted on Jan 31, 2008

localwonder
  • 6784 Answers

SOURCE: where can I sell a pioneer pdp 5070pu plasma tv for parts?

HI, the best way to do this is to disassemble the set and post all the individual internal parts like the power board and main PCB logic and v boards, on line on a e-bay type of sale forum. this way, you can make more money. if you post the entire plasma screen with the crack as is, you will not get many hits. is will be assumed that it is damage goods.

Breaking this set down and, posting the internal circuitry piece by piece will make you more money in this case. The power supply board will sale for at least 289.00. and the main logic(PCB) will sale for 300 to 350. i would go this route to maximizes your gain.

Posted on May 20, 2009

rulds2008
  • 3866 Answers

SOURCE: How do I hook up a Pioneer PDP-4300 for High Def?

That depends on what source your talking about.

Cable call you cable provider and ask them for a HDTV box

Satalite you should already have one if not ask them.

OTA =over the air you need a digital tuner with a nice antenna I suspect this has a digital tuner inside so all you need is a good antenna.

DVD= hook the DVD up with the red,green,blue cables called SCART connections..

Blueray= Will bring you high def.. with its connections.

So your question is vague and can be answered in so many ways.. Rate me please

Posted on Oct 03, 2009

  • 4 Answers

SOURCE: Will the Pioneer PDP-R03E Plasma TV Media box work

Yes it will

Posted on Jan 14, 2010

  • 1 Answer

SOURCE: Pioneer Plasma TV-PDP-4270HD won't turn on. TV

Try this! There should be a power button on the bottom of the panel that has to be depressed for the television to power on. It is the main power supply button and without it there is no power going into the TV.

Posted on May 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer PDP-4300 43" Plasma TV, 1/8 of screen has vertical stripes no picture


Look to see PIP or picture in picture is not engaged as it may be doing this.

Dec 10, 2012 | Pioneer PureVision PDP-4300 43 in. Plasma...

1 Answer

PDP-4300 has no sound


Try it on headphone. Try changing the input to some other device that works. If it does not work even then, this may need attention by a qualified service technician.

Jul 27, 2012 | Pioneer PureVision PDP-4300 43 in. Plasma...

1 Answer

I have a pioneer plasma display pdp-435pu and power cabel but there is no connection wier for cabel connection


This model, according to what I have found from Pioneer, does not contain a TV Tuner. It is a multimedia Television/Monitor.

Oct 11, 2011 | Pioneer PDP-4350HD 43 in. Plasma...

3 Answers

Tv won't come on...light in corner just blinks red


OK Its your power supply and it can be fixd for free due to a recall.
PLEASE READ BELOW what I found out.
Here's the whole notice:

Important: Free Power Supply Replacement for Certain Pioneer Plasmas

Pioneer is continuing to offer a free, in-home power supply replacement for certain of its second and third generation plasma models listed below for consumers who experience a problem with the original power supply. If a consumer model is not listed below, no power supply replacement is needed and no further action needs to be taken.

If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded in your home at no charge.

Consumer Plasma Models (12 listed):

PDP-505HD
PDP-503PU
PDP-5030HD
PDP-5031HD
PDP-433PU
PDP-4300
PDP-4310
PDP-4330HD
PRO-800HD
PRO-800HDI
PRO-1000HD
PRO-1000HDI
The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

We apologize for any inconvenience, and we thank you for your cooperation.

Apr 02, 2010 | Pioneer PureVision Pro-800HD 43 in. Plasma...

2 Answers

Loud pop and tv went off...


Here is a solution from the Pioneer web site:

http://www.pioneerelectronics.com/PUSA/Support/Important%3A+Updated+Information+Regarding+Free+Power+Supply+Replacement+for+Certain+Pioneer+Plasmas
Important: Updated Information Regarding Free Power Supply Replacement for Certain Pioneer Plasmas Pioneer is continuing to offer a free, in-home/office power supply replacement for certain of its second and third generation plasma models listed below for customers who experience a problem with the original power supply. If a model is not listed below, no power supply replacement is needed and no further action needs to be taken.
If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded at your residence or office at no charge.
Plasma Models (15 listed):
  • PDP-505HD
  • PDP-503PU
  • PDP-5030HD
  • PDP-5031HD
  • PDP-433PU
  • PDP-4300
  • PDP-4310
  • PDP-4330HD
  • PRO-800HD
  • PRO-800HDI
  • PRO-1000HD
  • PRO-1000HDI
  • PDP-433CMX
  • PDP-502MX
  • PDP-503CMX
The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

Anyone with questions can call Pioneer's toll free hotline at 800-421-1404.
We apologize for any inconvenience.

Aug 09, 2008 | Pioneer PureVision Pro-800HD 43 in. Plasma...

1 Answer

Pioneer pro800hd plasma just made a loud pop and then went to black the power button(red led) is flashing. power supply??, flyback xformer??? any ideas. worth fixing??


The affected models of consumer plasmas are listed below. Anyone who owns or uses one of these models may contact Pioneer through its toll free hotline at 800-421-1404 to arrange for the free, in-home upgrade. If a consumer model is not listed below, no power supply replacement is needed and no further action needs to be taken. If consumers are not sure if their plasma is affected, they should call the toll free hotline for confirmation.
Consumer Plasma Models (13 listed): PDP-505HD PDP-4330HD PDP-503PU PDP-4300 PDP-5030HD PDP-4304 PDP-5031HD PDP-4310 PRO-1000HD PRO-800HD PRO-1000HDI PRO-800HDI PDP-433PU

Dec 30, 2007 | Pioneer PureVision Pro-800HD 43 in. Plasma...

2 Answers

Pdp-4300


Try turning the power switch to off and unplugging the television, then plug it in and turn it back on. I have had this same problem and this seemed to work for me.

Sep 25, 2007 | Pioneer PureVision PDP-4300 43 in. Plasma...

2 Answers

43" plasma (Pioneer)


Plasma tv's are known for having overheating problems. Most of these problems occur in the main power supply. Most technicians only replace these boards due to manufacturers policy. If you are lucky, you may find a local technician that can troubleshoot to the component level. This will save you an huge amount of money.The board could cost as much as $800 dollars. Scrivitron

Jul 09, 2007 | Pioneer PDP-4350HD 43 in. Plasma...

Not finding what you are looking for?
Pioneer PDP-4270HD 42 in. Plasma Television Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...