Question about One For All URC-3021 Remote Control
And need a universal remote control code
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The TV codes for a URC-3021 and an Orion TV are:
These are the steps to program your remote:
To setup your URC-3021 for a TV, these are the steps:
1. Turn on your TV.
2. On the remote control, press TV once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.
5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code until you find one that works.
Posted on Oct 13, 2009
Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.
if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
Posted on Dec 30, 2007
SOURCE: code needed for a Electrohome tv
The Product: Electrohome 27E510
3rd Party Universal Remote when trying to "scan" for correct codes inadvertently activates a diagnostics setting on the TV set.
The word "FACTORY" appears on the upper left quadrant of the screen in RED letters & suddenly all controls are "Locked Out." Television will not respond to button presses on original remote or on it's built-in-buttons on the side panel. All settings/options are "Locked Out" & the TV can only be shut OFF by physically unplugging it. Additionally, when the TV is plugged back in, it is still in the "ON" state & remains in "Locked Out" state.
The Solution: (thanks to a couple of hard-working Support Personnel at NESA)
Plug TV back into power source. Wait until it powers up and the word "FACTORY" is visible on-screen.
Press 6-4-8-3 on the TV's ORIGINAL IR remote device.
You are now in the diagnostic settings Sub-Menu, & the word "ADJUST" will be on the screen.
Press "MENU" on your TV's ORIGINAL IR remote device.
The TV is now back to it's former fully-functioning state.
Posted on Jan 16, 2009
codes for grundig , 0331,1211,1221,1231,1241,1251,1261,1271,1281,1301,1311,1321,1331,1341,1351,2541,2551,
hope this helps .
Posted on Mar 01, 2009
Tips for a great answer:
Jan 24, 2016 | RCA Televison & Video
Jul 26, 2014 | Televison & Video
Jul 26, 2014 | Televison & Video
Mar 17, 2013 | Panasonic Televison & Video
Feb 20, 2009 | Admiral AAV7000A
Jun 19, 2008 | Televison & Video
Jun 17, 2008 | One For All URC-4021 Remote Control
Feb 26, 2008 | Televison & Video
64 people viewed this question
Usually answered in minutes!