Question about Computers & Internet

1 Answer

Wireless keyboard and putting computer screen content onto my TV screen

I have an IMac OS 10.6.8. Will the above products be compatible for the purpose I described?

Posted by on

  • franalan725 Jan 01, 2014

    How come the rest of my post didn't show? The products I'm asking about are NEXXTECH Clavier ET Wireless Desktop Keyboard and mouse, 2.4 GHz, NEXXTECH Mini Display Port to HDMI, and NEXXTECH Flat Slim HDMI Cable. Thanks for your help!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

In theory, if the TV has an HDMI input, and your computer has the mini DisplayPort output, the only thing you might run into is resolution issues. Sometimes I've seen ghosting and other weird anomalies with computers plugged into TVs, but most of that was in the past. What resolution does your TV support? 720p, 1080p?

Posted on Jan 02, 2014

  • franalan725 Jan 06, 2014

    Thank you so much, secret! My computer doesn't have a mini DisplayPort output so end of story.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2841 Answers

SOURCE: APPLE IMAC G4 - TRYING TO INSTALL OS WITHOUT DISK EJECT BUTTON

Reastart the iMac and at the same time hold down the mouse left click button. If that does not work.

  1. Restart the computer.
  2. Immediately after the startup sound, press and hold the key combination Command-Option-O-F.
    Note: The Command key has the Apple and (commandkeysymbol.gif) icons on it.
  3. Release the keys when you see a white screen that says "Welcome to Open Firmware."
  4. At the prompt, type: eject cd
  5. Press Return, then wait a few seconds. The disc drive should eject any disc that is present, and "ok" appears behind your command when the action is complete.
  6. Type: mac-boot
  7. Press Return.

Posted on Dec 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Imac volume goes down by it self


Do you have a wireless remote or keyboard that may be out of batteries?

Jul 18, 2012 | Apple iMac 17" Desktop

1 Answer

Hy i install window 7 in imac desktop after installing black screen apper keyboard blinking 3or 4 minits not working even when cd is booting when it say"press any key to boot cd' wirless keyboard is...


Hi, by reading your question I am not sure if you are saying that when you load up Windows 7, nothing shows but a black screen or if your keyboard is not working. Well anyway I am going to try and help with both.
If you are getting a black screen when loading up, this is probably because your computer does not support Windows 7. In order to use Bootcamp and install Windows 7 you must be on Mac 10.6 and up or Snow Leopard. That is the only OS that supports Windows 7 and if you do have Mac 10.6 but you still have the black screen it is probably because the actual computer can't handle it or the drivers in the computer might not support it. I would say anything before 2005 will not be able to load Windows 7, but I am just taking a guess. For my second solution dealing with your wireless keyboard, when you installed Windows 7, no drivers were installed because Windows does not support them yet. This is why your keyboard was blinking, it was looking for a connection because it was not connected to anything. When installing Windows 7 you will need a wired mouse and keyboard because your Apple Wireless Bluetooth Keyboard is not yet pared with the computer. In order to install the drivers to make your keyboard work you need to load up Windows 7 by holding down the "option" key when turning on the iMac. Then once you select Windows 7, and it loads up to the desktop you need to insert your Mac reinstall CDs, then follow the on screen steps to install the drivers. From there you should be able to go into the control panel and add a wireless keyboard under the devices panel.
I hope this helps, Justin

Feb 06, 2011 | Apple eMac G4 Desktop

1 Answer

F5d5050 Belkin USB 10/100 Ethernet Adaptor - Does it work with Windows 7 64 bit OS? I have spent hours trying to install a Swann and a Digitech product but none seem to work with the above OS. Any...


Hi,

You cannot install this adapter in a Win 7 computer because the drivers are not compatible with Win 7.
So far Belkin haven't updated the drivers for win 7 OS. The latest drivers for this adapter is compatible only with

" Windows 98SE, Windows Me, Windows 2000, Windows XP 32-bit, Windows Vista 32-bit "

Click here to see the belkin compatible drivers in the website.

With Regards,
Prema.

Jan 06, 2011 | Belkin Ethernet Adapter F5D5050 Network...

1 Answer

APPLE IMAC G4 - TRYING TO INSTALL OS WITHOUT DISK EJECT BUTTON


Reastart the iMac and at the same time hold down the mouse left click button. If that does not work.
  1. Restart the computer.
  2. Immediately after the startup sound, press and hold the key combination Command-Option-O-F.
    Note: The Command key has the Apple and (commandkeysymbol.gif) icons on it.
  3. Release the keys when you see a white screen that says "Welcome to Open Firmware."
  4. At the prompt, type: eject cd
  5. Press Return, then wait a few seconds. The disc drive should eject any disc that is present, and "ok" appears behind your command when the action is complete.
  6. Type: mac-boot
  7. Press Return.

Dec 11, 2009 | Apple iMac G4 Desktop

1 Answer

I locked myself out of my imac using leopard when my friend an e dell tec got in for me ithink he upgraded it to snow when in plugged it by accident and turned it back on it camer up telling me tgo restart...


1.: Find the disc that came with your iMac that says "iMac OS X Install DVD"
2.: Turn on your iMac
3.: Insert the disc into the SuperDrive
4.: Turn off your iMac
5.: Press down on the "Option" key on your keyboard, and keep it held down
6.: With your other hand, press the power button on the back of the iMac for 1-2 seconds
7.: A screen should come up with a picture of a hard drive, and a picture of a DVD
8.: Let go of the "Option" key
9.: Using your mouse, click on the arrow under the picture of a DVD
10.: Follow the on-screen instrustions, which will guide you through the process of re-installing OS X Leopard on your iMac

Sep 26, 2009 | Apple iMac 24" Desktop

1 Answer

Mac router compatability Zoom ADSL X6


Remember it takes two to tango, so the issue may just as well be in the iMac as in the Zoom X6... Regardless of that, I had the same problem (PC works fine, iMac and PC both get flaky when the iMac is powered up). Zoom tech support suggested trying RF channels 1, 6, or 11. The router was using channel 10, changing to channel 11 calmed things down. Zoom said there wasn't anything magic in those numbers, but their testing showed those channels worked best with the Apple products.

Dec 26, 2008 | Zoom (5590-00-03) Wireless Router (G66115)

2 Answers

Imac os 10.4


It sounds like the common firmware issue, can you read it at all?, if so download the latest firmware from apple and follow the instructions to install it, get back to me if you have difficulties

Nov 06, 2008 | Apple iMac G3, G4 USB Keyboard 9224078

2 Answers

IMac G3 unable to boot up


OSX isn't compatible with the older G3's.

Mar 26, 2008 | Apple iMac G3, G4 USB Keyboard 9224078

1 Answer

Updating a slot loading iMac from OS8.6


Unfortunately, The disks may be DVD, not CD. You might be able to do the install by networking the iMac to the Macbook and using the laptop's drive to read the disk.

Feb 19, 2008 | Apple iMac G3, G4 USB Keyboard 9224078

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...