Question about Kenmore 3.2 cu. ft. Plus Top Load Washer
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Starting in early 2002, the capacity sizes were changed around a little bit. A normal sized washer now all have the same sized tubs (pretty much) in the 110 series (Whirlpool Manufactured) washers. The capacity is now rated somewhat by the agitator action the washer comes with. Depending on the type of agitator you have, will determine the capacity. King size capacity means you have a pretty good capacity (size wise) than others. You have normal capacity, large capacity, super capacity, king capacity, and I even think they have canyon (yes canyon) capacity. Capacity sizes dont really mean to much though. In order for you clothes to get clean, the must have room in the tub to move. The must be able to float up, then get pulled down by agitator action. That should determine the size of what goes in the washer. Always use same type clothing when doing laundry (i.e. towels with towels, sheets with sheets, etc, this will keep the load balanced better). Watch what you load, comforters are ok (per manufactures ok) but I do not tlike the idea unless its a front loader, and only by itself. Let me know if this helps you out any.
Posted on Jun 01, 2008
SOURCE: Kenmore 80 series won't spin
If it agitates and drains. leaving your clothes clean but soaking wet. It is most likely the transmission/gearbox. the motor is working otherwise it would not agitate. it is stuck in agitate mode and cannot "shift" into spin mode. new transmission will cost 140-170 and takes 2 or so hours to replace depending on skill level. total repair cost parts+labor $300ish you may want to ante up for a new machine at this point. if you cant to the labor yourself.
part# should be this: tho double check using your own model#
Part # AP3096209
Posted on Dec 09, 2008
Check out this you tube. Had the same problem today. Tipped washer on its side and replaced coupler between motor and gearbox. Parts are about $15
This is a good diagnosis video.
Posted on Dec 20, 2008
Tips for a great answer:
Mar 05, 2013 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Feb 13, 2013 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Oct 26, 2010 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Aug 04, 2010 | Kenmore Washing Machines
Feb 02, 2010 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Oct 26, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Jul 16, 2009 | Washing Machines
May 26, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Apr 07, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer
299 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: