Question about Technics SL-BD22 Turntable

3 Answers

SL-BD22 SETUP i have a brand new technics SL-BD22D turntable..i tried to connect it to a stereo system but the sound was verrrrry low...solution? thank you..

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 864 Answers

That is an older turntable and may require a "phono" input (a designated input--not just an RCA phono plug).  Newer stereo systems may not have a phono input and you may have to feed the turntable through a pre-amplifier to get enough power to run it with a standard component line input (like Tape or Aux).

Posted on May 20, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi
you need to connect to the stereo using a pre amp as the output from a magnetic cartsidge is very low.

Posted on May 20, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 975 Answers

Go to RADIO SHACK and get a pre amplifier module (hope its still available) , that will do the trick , AJ

Posted on May 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to to hook up my turntable to my bose system


As long as the Bose has a spare audio socket you can do it. You however will need a device called a "Magnetic Cartridge Preamp". Otherwise all you will hear is the sound at a very low level.

Feb 10, 2013 | Panasonic Technics SL-BD22D Turntable

2 Answers

I just purchased a Technics SL-BD22 turntable and it came without the ground wire. Is there anywhere I can purchase this proprietary part?


just get any small speaker wire and use that as your ground , attach that to the reciever you are using

Jan 16, 2010 | Technics SL-BD22 Turntable

1 Answer

I PURCHASED A LIKE NEW TECHNICS SL BD27 TURNTABLE. I HOOKED THE RCA AUDIO JACKS TO THE AUDIO INPUT ON MY SONY TV AND GET VERY LOW SOUND LEVEL WHEN TV VOLUME CONTROL IS AT MAX. REPLACING CARTRIDGE AND...


Yes you need a pre amp

It would also be the same if you connected it to a computer to record an LP to CD. Mine is a little different and has one already built in that I can switch in and out of line.

Try spend a little more if you can as many pre amps can introduce noise.

You may also want to check that the turntable is properly grounded to prevent noise too

Oct 02, 2009 | Technics SL-BD22 Turntable

1 Answer

Can I get a replacement Dust Cover for a SL-BD22D And if yes where from. John Chichester


Your best option would be EBAY but double check with sellers as to the quality etc

Aug 13, 2009 | Technics SL-BD22 Turntable

3 Answers

Technics SL-BD22 ground wire does not reduce hum. Any solutions?


presuming it has "some" effect, then gnd wire itself it good. Even though there may be a gnd thumbscrew on the preamp try slipping the ground wire under a screw on the main amp or receiver that screws into metal and make sure the gnd wire is touching metal under the screw.

if that didn't help, then you may have:
>a cartridge with an open gnd internally.
>an open gnd wire from the back of the cartridge to the outer shields of the RCA connectors.
>or your neutral & hot wires of your house wiring might be reversed causing something weird.
>a low quality preamp. (it should have a seperate wall adaptor so that only low voltage dc goes near the preamp)
good luck ground issues can be tough!

Feb 06, 2009 | Technics SL-BD22 Turntable

1 Answer

New cartridge for Technics SL -BD22D


the prestige gold might be a little bit of overkill for this turntable meaning the turntable is middle of the road and the cartridge is hi-end.

To get a closer match for your TT try a yahoo search for "AT3482P-DE" (with the quotes) and the result will be the closest match to what this turntable is designed for. also you can find your TT's owner manual here
http://www.vinylengine.com/library/technics/sl-bd22d.shtml but you will have to register to download the free manual. in that manual you will find the shape of the drawings for the cartridge is the same. both made by audio technica

Feb 03, 2009 | Panasonic Technics SL-BD22D Turntable

Not finding what you are looking for?
Technics SL-BD22 Turntable Logo

Related Topics:

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Technics Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5126 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Technics Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...