Question about Apex Digital LD4088 LCD TV

1 Answer

Apex digital250A digita tv converterl

I don't know how to connect it so I can watch tv.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Apex Digital Master
  • 9,771 Answers

The outside antenna gets threaded onto the RF connector that says antenna in. Then either connect another RF cable to the tv and select ch 3 or 4 (switch on back of box) or use the yellow,red and white cable to the tv. If you used the three cables use the remote to select the input you used. Just advance the channels until you find the picture. If you used the RF cable, just tune to channel 3 or 4 whichever you used. Now do a channel scan with the remote that came with the converter. Once that is done you will have to use that same remote to change digital channels.

Posted on Jan 09, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need tv code for apex le3242


0865/0873/0851/0869. These are setup codes to check with Apex Brand TVs. If you wish to know more codes with many more brands of remote controls, check this link.

Jan 23, 2013 | Apex Digital Apex 32 in. LED 720p 60Hz...

1 Answer

How do i watch movies on my tv.


Click here to download the user manual to this TV. It has all details you want to know.

Sep 10, 2012 | Apex Digital PF2020 20" TV

2 Answers

Don't have sound watching tv, but have sound when dvd


Download its user manual, and check audio settings. Refer it. If all settings are OK, still no sound output with on-air programmes, teh sound detector section has the fault. Seek tech support. This is a skilled work, and need all measuring instruments and through knowledge in electronics.
To download the user manual, click here.

Jun 06, 2012 | Apex Digital LD4088 LCD TV

1 Answer

I have a 8 years old apex tv. while watching tv the picture went out but it still has sound. i can't see the channel numbers or volue bar is it worth fixing


I WOULD SAY NO ! THE PICTURE TUBE IS PROBABLY AS MUCH AS THE TV IS WORTH. i had a very nice sony trinatron tv. the picture tube whent on it at about 5 years so I CALLED FOR REPAIR AND THE PICTURE TUBE WAS 2-300 DOLLARS. good-day !

Jan 20, 2012 | Apex Digital Televison & Video

2 Answers

The philips universal remote codes for my apex tv don't wok. Since I put new batteries in none of the codes for apex tv work


Hello
Philips universal remote control cannot be synchronised with Apex Digital TV. There is no code for Apex with it. There are very rare remote controls which have codes with Apex Digital. Comcast On Demand Custom DVR 3-Device Universal Remote Control is one amoung them. Codes for Apex Digital Tv; with this remote are:
0748, 0765, 0767
Buy this one. It can be sychronised with most of the present devices. OK.

May 31, 2011 | Apex Digital GT2015 20" TV

1 Answer

I have an apex flat screen TV and I use direct TV as my cable provider. I was watching TV and walked out of the room and when I came back the TV said to run the channel auto scan in the TV menu...I did...


unplug the tv and the direct cable box reset the box by plugging both the tv and box back in. MAKE SURE the tv is set on the right input for the box first. if the tv said to do auto scan then you lost the connection from the box either by changing the input that box is connected to if by a cable its usually 3 or 4. if by hdmi or rca cables its an input channel. also make sure not cables are loose try that first before unplugging the tv let me know

Mar 13, 2011 | Apex Digital Televison & Video

1 Answer

Apex dt250, capacitor blown. I would like to know


The DT250 has one or more bad 470uf 25v capacitors. You should replace all four. Look at some of these youtube videos for how do do the replacement.

http://www.youtube.com/watch?v=on_2CP52cW4
http://www.youtube.com/watch?v=YCSNWi3UHf4&NR=1

Order 4 new 470uf 25v capacitors from digikey.com P/N P10274-ND

Use first class mail as your shipping method. Will be under 10 dollars total.

Aug 11, 2010 | Televison & Video

1 Answer

No Picture


As long as you can hook that same cable up to a different TV and get a good picture, you must have somehow damaged the tuner on the APEX - unless the set was mishandled while moving. Those cheaper brands won't take much punishment.

Jan 20, 2007 | Apex Digital AT2008S 20" TV

2 Answers

TV Locked!


Turn on the TV With the remote press the F button and the Mute button at the same time. This should bring your TV back to normal mode. from Don "the TV King"

Jun 04, 2006 | Apex Digital AT2008S 20" TV

Not finding what you are looking for?
Apex Digital LD4088 LCD TV Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apex Digital Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you an Apex Digital Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...