Question about Konica Minolta Konica 512 42PL

Open Question

When machine on its shows poweroff

When i on the machine that head are moves. But in Print centre it will shows power off. What i do? Please tell me

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Solution for unable to Init.43 repair


To clear the message, you need to disconnect the Brother machine from the power outlet to check the machine. Follow the steps listed below: Check for foreign objects, such as a paper clip or scrap of paper, inside the machine. Disconnect the machine from the power outlet and open the scanner cover by pulling up on the lower right corner of the cover. Look inside the machine and remove any foreign objects. If you see jammed paper or another item inside this area, gently pull it out and then close the scanner cover securely. If the error continues to appear, move the print head and examine under the print head. NOTE : The images shown below are from the representative product and may differ from your Brother machine. 2-1.Disconnect the Brother machine from the poweroutlet. 2-2.Open the scanner cover by pulling up on the lower right corner of the cover. 2-3.Check the print head's position. In the example photo the print head is positioned at the left hand side of the platen area. 2-4.Gently move the print head to the center. Caution Be careful not to force the print head to move. If the print head is positioned at the far right hand side, you cannot move it. Please contact Brother Customer Service from "Contact Us". 2-5.Examine under the print head. If anything is found, remove it. Hint Use a flashlight if necessary to check thoroughly. 2-6.Close the cover and reconnect the machine to the power outlet. If the message continues to appear on the LCD, the machine will require repair as the print head has failed and will need to be replaced.

May 29, 2014 | Brother Sealed Mfc-j430w Wireless Printer...

1 Answer

Unable to init see troubleshooting and routine maintenance chapter in user's guide. Please help me!!!


1. Check for foreign objects, such as a paper clip or scrap of paper, inside the machine.
Disconnect the machine from the power outlet and open the scanner cover by pulling up on the lower right corner of the cover. Look inside the machine and remove any foreign objects. If you see jammed paper or another item inside this area, gently pull it out and then close the scanner cover securely.

2. If the error continues to appear, move the print head and examine under the print head.

NOTE : The images shown below are from the representative product and may differ from your Brother machine.

2-1.Disconnect the Brother machine from the poweroutlet.
2-2.Open the scanner cover by pulling up on the lower right corner of the cover.

2-3.Check the print head's position.
In the example photo the print head is positioned at the left hand side of the platen area.
2-4.Gently move the print head to the center.
Examine under the print head. If anything is found, remove it.
Close the cover and reconnect the machine to the power outlet.

Feb 20, 2014 | Brother DCP 115C All-In-One InkJet Printer

1 Answer

How do I change the print head for


With the machine powered up, open the transparent cover. The cartridge/printhead assembly will slip to the centre. Remove the cartridges and then move the printhead slightly left until you can lift the locking gate holding it down. Remove the printhead and fit the new one. You will need to get a QY6-0052 printhead.

Jan 29, 2014 | Canon PIXMA iP90v Printer

1 Answer

My epson model cx5500 has problem i want to change my head nozzle .my head nozzle clott.printer warranty perod will also over .please tell me the price of reparing it in kolkata,westbengal & also...


Inkjet printers need to be used frequently to prevent inkdrying out in the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages, thenprint head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer thanreplace the print head.

Jul 09, 2011 | Epson Stylus CX5400 All-In-One InkJet...

1 Answer

Clean enable 46 error i seen in my brother 295C, can u help? How i solve it?


Follow the steps listed below:
  1. Check for foreign objects, such as a paper clip or scrap of paper, inside the machine.
    Disconnect the machine from the power outlet and open the scanner cover by pulling up on the lower right corner of the cover. Look inside the machine and remove any foreign objects. If you see jammed paper or another item inside this area, gently pull it out and then close the scanner cover securely.

  2. If the error continues to appear, move the print head and examine under the print head.

NOTE : The images shown below are from the representative product and may differ from your Brother machine.

2-1.Disconnect the Brother machine from the poweroutlet.
2-2.Open the scanner cover by pulling up on the lower right corner of the cover.


565_bhmini1.gif
2-3.Check the print head's position.
In the example photo the print head is positioned at the left hand side of the platen area.


jam3.gif
2-4.Gently move the print head to the center.

Caution Be careful not to force the print head to move.
If the print head is positioned at the far right hand side, you cannot move it. Please contact Brother Customer Service from "Contact Us".

jam6.gif


2-5.Examine under the print head. If anything is found, remove it.

jam7.gif Hint Use a flashlight if necessary to check thoroughly.


2-6.Close the cover and reconnect the machine to the power outlet.

If the message continues to appear on the LCD, the machine will require repair.


Note Please contact Brother Customer Service from "Contact Us".

Mar 07, 2011 | Brother MFC295CNAll-In-One InkJet Printer

2 Answers

Brother 130c print unable 50


Solution #1 is absolutely spot-on from adnanbhatti, copy the link into your browser to be able to see the photos of the printer and how to slide the print head:
http://welcome.solutions.brother.com/BSC/public/us/us/en/faq/faq/000000/000500/000065/faq000565_013.html?reg=us&c=us&lang=en&prod=dcp130c_all&Cat=11

When I slid the print head over as specified, I found a little crumpled paper fragment soaked with ink. Pulled it out.... I turned on the printer, it ran a cleaning cycle automatically, and started printing just fine!

Aug 18, 2009 | Brother DCP 130C All-In-One InkJet Printer

1 Answer

Error message 07,010.43:41188


That error message means that the print head is not moving properly from the home park position to the print position.
Here are the mose likely possibilities.
1 Ink has spilled out and into the stainless steel block that the print head pivot shaft goes through. With the covers off looking from the front it is on lower left about mid machine, about 1 inch square. Would most likely have yellow ink in it.
2. You had a power failure or unpluged the machine without powering it down properly and the Print head wiper is tacked to the print head not allowing it to move.
3. One of the cables that are connected to the print head are keeping it from moving properly.
4 The Media motor gears are out of timing. That is not very likely though.
Also, to prevent this, you need to be sure the machine is level front to back and side to side.
I have seen one print head defective leaking ink into the bottom of the machine making a huge mess.
But that code is definatly related to the print head not being able to pivot freely.

Jan 17, 2008 | Xerox Phaser 8500/DN Printer

1 Answer

Error Number 07,010.43:7106


That code has 4 primary reasons for occuring.
First off, the code is related to the print head not moving freely from a park position to a print position.
Causes mostly arise from the printer not sittilg level front to back and side to side.
In order are what mot frequently cause this code.
1. If you remove the covers, there is a stainless steel print head block on the lower left side of the machine looking from the front. It is just about mid machine and about 1 inch square. The ink can leak down into that block causing it to be extremennly sticky and not allow for free movement of the print head.
2.If you lost power or unpluged the machine with out cycling it down properly, the print head, wiper can be tacked to the print head, not allowing movement.
3. One of the cables attached to the back of the print head may be to tight not allowing the print head to move.
4. The process motor timing may be off, although this is listed as a cause, I have never witnessed it causing the problem.
The print head isself may be bad, I have seen that once, but that was kind of a freaky sitution and that would be in my opinion the least likely cause.

Jan 16, 2008 | Xerox Phaser 8500/DN Printer

2 Answers

Problem printing


Probably means the print head is jammed and can't slide freely on the track. Try unplugging the printer and *gently* sliding the head/cartidge toward the center. Then inspect the cartridge path to see if you can find an obstruction. It may help to remove the case (it should snap off) unless that makes you nervous. Lots of good suggestions at . Good luck!

Sep 09, 2007 | Canon PIXMA MP780 All-In-One InkJet...

Not finding what you are looking for?
Konica Minolta Konica 512 42PL Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...