Question about Konica Minolta bizhub C250 All-In-One Laser Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Im thinking either it was moved improperly and the image units werent kept level, or maybe just sitting to long caused them to settle in. try (gently) removing the IU's and shaking them (keep them level) in order to unclog or redistribute the developer inside. (imagine sand in a horizontal tube. It has to be uniform all the way accoss the tube, and not settled into any one location)
Posted on Jun 09, 2009
The C0500 code means that the fusing unit is not heating up properly. The fusing unit is the part that gets hot and "fuses" the toner onto the paper. You are going to need to have a technician come out and diagnose the problem for you. Most common failure in the fusing unit is a blown thermal fuse. Next most common is a bad thermister, which is the part in the fuser that monitors or "reads" the fuser tempurature. Although rare you could also have a bad heater lamp. Removing the fusing unit and diagnosing which part is bad is not something I would recommend for anyone other than a trained service technician. At least you know what the cause is so you do not have to worry about getting mis-information from the service person. Such as if they say you need a new fusing unit. You just need the defective part replaced, NOT the whole unit.
Good Luck and Thank You for using Fixya.
Posted on Nov 09, 2010
Tips for a great answer:
Feb 12, 2017 | Office Equipment & Supplies
Feb 23, 2011 | Konica Minolta bizhub C450P Laser Printer
Aug 31, 2010 | Office Equipment & Supplies
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: