Question about D-Link Dlink Wireless N 300 Router Dir615 Wireless Router 4port Switch 802
Tried putting in disk tried pushing button still can't get in to change password.Yes i tried admin and left password blank.Pushing and holding the reset button on the back not resetting it either.How do i get in to put in a new password.
Check the label under or at the back of the router for the default user name and password.. If you can't connect with this information try a reset ... hold the reset button in for 30 seconds to attempt a reset. If unsuccessful try again but also hold the button in while unplugging and reconnecting the AC adaptor at the back of the unit. If it still fails to reset after trying this a few times the unit may have a hardware failure.
Posted on Jan 01, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here are the steps to reset the access point from D-Link's website:
Please visit http://support.dlink.com/faq/view.asp?prod_id=1600 for complete FAQ and screen shot.
The following reset procedure will completely restore the default settings on the access point including your password.
Step 1 Locate the reset pinhole on the back of the unit.
Step 2 With the access point powered on, press and hold the Reset button.
Step 3 Hold the Reset button for about 10 seconds.
Step 4 Release the Reset button.
Step 5 The device is now at factory defaults.
You can find the complete manual for your wireless access point here:
Posted on Mar 17, 2009
You need to use a computer to set up the wireless router. Go to the computer and open internet explorer. In the address bar, where you would type www.microsoft.com, type in 192.168.0.1. This is the router address. You will get a screen asking you for a password and user name. The default user is "admin" there is no password. you can then go into the router and configure the ssid as well as a password.
Posted on Jan 26, 2009
SOURCE: password protect wireless access
You'll need to access the administrator web page for your router, and then set a security key (password) for wireless users.
For step-by-step instructions for setting up security on the D-Link DI-614 router, see:
Posted on Sep 07, 2012
Tips for a great answer:
Jan 22, 2013 | D-Link DIR-615 Wireless Router
Sep 03, 2012 | D-Link DIR-615 Wireless Router
Jun 27, 2011 | D-Link DIR-615 Wireless Router
Feb 27, 2011 | D-Link DIR-615 Wireless Router
Feb 15, 2011 | D-Link DIR-615 Wireless Router
Jan 24, 2011 | D-Link DIR-300 Wireless Router
Jan 10, 2011 | D-Link DIR-615 Wireless Router
Oct 31, 2010 | D-Link DIR-615 Wireless Router
Feb 22, 2010 | Computers & Internet
Dec 28, 2009 | D-Link DIR-615 Wireless Router
241 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: