Question about Televison & Video
We have a ps43d451a3 plasma and recently it has started displaying the autovisualisation split screen when we switch on the tv and then we have to turn it off by going to the picture menu. After some time of watching tv, it returns again. How do I turn this off permanently?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove the Power Supply cable to Y Main board and check the Vs voltage in Power Supply board.
1. Vs voltage is OK, replace the Logic board or Y Main board.
2. Vs voltage is NG, replace the Power Supply board.
Posted on Jan 01, 2008
Our LG 50" plasma tv screen went black after a popping noise but still had sound, after great diliberations decided to take the back off and have a peek!
We unplugged the tv and tested the fuses (there were three we could see) one had blown, the one on the left as you look at the back of the tv it also has one above it. We wrote the code/seriel number down and took the fuse to the electrical wholesalers Maplin and bought a pack of 10 fuses for £1.29 replaced the fuse in the tv and everything now fine!!!!!!
Hope this might be of use to anyone whose lost the picture after a loud popping/snacking noise but still has sound.
Posted on Jan 17, 2008
Un plug the power to the Plasma Screen and also to the Media Receiver for ten minutes. Disconnect the off the air antennas both A and B. After ten minutes plug in the plasma screen then the media receiver and turn on wi the remote control. You should now be back in operation. I was.
Also It may not be a bad digital tuner. The TV Guide feature is active even when the zip code is set to all 0s so if you have an over the air antenna attached the TV will look for the TV Guide info and if it can not find it because of a weak signal or the chanel it is tuned to does not carry that information the TV thinks that tuner does not work which triggers the 12 flashes. Also on power up the gray box with the waring message "Plasma Display Starting Up, Please Wait" appears and the screen is blank.
Posted on Feb 20, 2008
SOURCE: Samsung Plasma 42" TV - 2006
Hi, this is quite a common problem for plasma screens and LCD screens. The fluroscent backlight is more than likely faulty and would need replacing. The best thing to do is to take it to a service centre because there are no user servicable parts inside the plasma.
Posted on Nov 01, 2008
Tips for a great answer:
Sep 04, 2016 | Samsung Televison & Video
Sep 09, 2010 | Samsung LNT5265FX 52 in. LCD Television
Jun 19, 2010 | Samsung SPN4235 42 in. Plasma HDTV
Jun 09, 2017 | Samsung Televison & Video
May 04, 2009 | Samsung PS50A457 50 in. Plasma TV
Feb 12, 2009 | Philips 42PF9630A 42 in. Plasma Television
Dec 04, 2008 | Protron PLTV-4250 42 in. LCD Television
Nov 01, 2008 | Samsung HP-R5072 50 in. Plasma HDTV
Dec 06, 2007 | Samsung HP-P5031 50 in. HDTV-Ready Plasma...
Apr 25, 2017 | JVC Televison & Video
81 people viewed this question
Usually answered in minutes!