Question about Jenn-Air JCD2295KES Stainless Steel

1 Answer

Ice maker overfill

The icemaker on this unit has overfilled the bin since day one. The ice spills out onto the dispenser drive housing at the back of the bin. There is no guidance in the install manual for this problem.

Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jenn-Air Master
  • 3,361 Answers

The metal off/on arm may be disconnected. A full bin should keep the arm in the up position and shut off the ice maker.
Remove, then re-insert the metal arm in the back of the ice maker control head.
Make sure that a full bin of ice activates the control arm.
You may need to buy a replacement arm that is longer so that the ice catches on the arm.

Posted on May 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My icemaker is overfilling water.


Find the manual for the ice maker - it may be in an envelope on the back of the refrigerator. Inside, there should be instructions for setting the timing for the water fill valve. Your water fill valve is open too long, reduce the open time for the fill valve.

Dec 18, 2013 | Refrigerators

1 Answer

Ice maker not working


my icemaker has a wire overfill sensor which shuts off the icemaker if there is too much ice in the basket. If this wire gets pushed up it will stop making ice until level lowers OR manually lowered.

Feb 08, 2012 | Electrolux EW28BS71IS (278 cu ft) Bottom...

1 Answer

Icemaker drips after refill


Good day,
The ice maker has a switch internal, that turns the water valve in the bottom rear of the machine on for 7 seconds after it harvests a batch.
That valve must close smartly, otherwise it will cause the cavity of the ice maker to overfill, and cause it to overfill.
If it does harvest cubes, then that is your problem. Replace the water valve. It's a very common problem.

Thanks for using FixYa

Jan 12, 2010 | Kenmore Refrigerators

1 Answer

The icemaker in my freezer has a slow drip. The water then freezes in the ice bin. Why is it dripping, and how can I fix it?


Good day,
The most common reason is the ice maker is overfilling because the water valve in the bottom rear of the refrigerator leaks on the off cycle, and needs replaced.

Make sure the machine is level and the ice maker is mounted in the freezer properly to keep it level.

Also, make sure the fill pipe going into the back of the ice maker is properly positioned.

The Ice maker body could have failed but is very rare.

Nov 08, 2009 | Kenmore Refrigerators

1 Answer

Ice maker overfills and leaks into the ice bin.


I have had a similar problem several times. What I have found is that the ice tray coating has begun to flake off. Then, the ice sticks or partially dumps. Next more ice builds up and when the valve opens the water runs over the partially emptied tray and spills into the bin making "icebergs". The remedy is to replace the tray or if that is not possible, then, the whole icemaker. In fact, I have one down stairs to put in tomorrow. They don't seem to last more than about 4 years or so.

Jul 11, 2009 | Amana ARS266ZBS Side by Side Refrigerator

1 Answer

Ice Maker overfilling with water


you may have abad water valve or icemaker

Apr 02, 2009 | Admiral 26 cu. ft. Side-By-Side...

1 Answer

Ice bucket/bin frozen in place


mine was overfilling because the ice was getting stuck on the way out. So some stayed in the tray and when the water would refil, it would overfil and go over the stuk cubes. leaving it to overflow to the bottom and freeze like yours.

Sep 09, 2008 | U-Line Icemaker

2 Answers

Ge top freezer refrigerator ice maker problems


most likely bad icemaker but could be a leveling issue or overfilling which both would be very noticable

Jan 04, 2008 | GE Â 17.9 Cu. Ft. Top-Freezer...

Not finding what you are looking for?

Open Questions:

See all Jenn-Air JCD2295KES Stainless Steel Questions

Jenn-Air JCD2295KES Stainless Steel Logo

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

john h

Level 3 Expert

12104 Answers

Are you a Jenn-Air Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...