Question about Quasar VM-D51 Camcorder

1 Answer

Static record When my camera records, the picture is very static like. You can make out images, but it is quite distorted by the static.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 814 Answers
Re: Static record

To find this information you will have to either go to the Panasonic customer support website and enter your palmcorder model number and check out the frequently asked questions to see if they have already asked this question and have a answer in the form. the website is ( you can call the customer support telephone number at 1-800-211-7262. Between the hours of 9am-7pm EST. You can also use the customer support e-mail at Give them the Brand name and model number of the palmcorder. Explain to them the problem you are having with the fuzzy picture quality from the recordings of your palmcorder. I Hope this information helps you with your palmcorder problem.

Posted on Jun 10, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Static noise when playing back recording, sounds like the wind

This camera has a single Mic - make sure your finger isn't over it though -- try making a recording in a closed room - no wind noise - is there still static ??
Go through settings and see what choices there are -- like outdoor , indoor . close to subject etc.
My CAM had a close up and background button - which was a sensitivity setting - and the background setting picked up EVERY sound from miles around and filled the tape with noise. The close up setting only picked up sound from bout 2 - 3 meters.
Do you also have an external plug for a Mic ? this would also check whether it's the camera mic or recording that is at fault ??

Mar 07, 2011 | Samsung SC-X105L Memory Card Camcorder

1 Answer

When recording and playing back the view screen is distorted with alternating lines.

If there is no problem when you play back on a different camera or computer, then the fault concerns LCD ribbon cable or lcd controller circuit on main pcb.

If the recorded image is also distorted on computer and different camcorder, then you have a faulty ccd sensor.
Also wiring problem and pcb fault sometimes can cause ditorted picture, in that case the problem is usually a kind of dirturbance and does not happen all the time.


Jun 24, 2009 | Canon ZR830 Mini DV Digital Camcorder

1 Answer

Picture Image Becomes Blury When Recording

i had the same problem i just gave the camera a good smack and it was all good. lol

Apr 19, 2009 | Sony Handycam DCR-TRV38 Mini DV Digital...

1 Answer

Sony DCR-TRV33 not recording well

Use Sony Video-8 Head Cleaning tape to clean video head of camcorder that seems dirty / clogged and causing mosaic noise in picture.

Apr 02, 2009 | Sony Handycam DCR-TRV33 Mini DV Digital...

1 Answer

Scrambled LCD Screen

I think its problem of bad ccd imager or some any connector is lose in your camera.
Let me know exact model number to help you more.

Dec 19, 2008 | JVC GR-SXM260U Camcorder

1 Answer


Yes needs cleaned...try radio shack....or best buy for cleaning tape
hope this was of help!

Dec 11, 2008 | Quasar VM-L153 VHS-C Camcorder

1 Answer

Camera wont show picture-just looks like static

Ok.. Does the camera record video? If yes then its just a display problem.I would check to see if the LCD's connectors are in place and for loose contacts. If not you might have to get a new display. Should cost you around 50$ and is pretty easy to replace..

Dec 03, 2008 | Quasar VM-L152 Camcorder

1 Answer

Distorted Image

if it records the distortion then i suspect the guides are out of adjustment or your capstand roller is pushing the tape to high on the guides. need to have a profession serviced.

Feb 07, 2008 | Samsung SC-D23 Mini DV Digital Camcorder

1 Answer

Partial static in playback and record even after head cleaning

Replacing the cylinder with video heads part number A7048897A will cure the problem. If you need more help please advice. Arpi

Mar 16, 2007 | Sony Handycam CCD-TR517 Camcorder

Not finding what you are looking for?
Quasar VM-D51 Camcorder Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Quasar Video Cameras Experts

Josh Whitehead
Josh Whitehead

Level 3 Expert

1142 Answers


Level 3 Expert

94252 Answers

martin fysh

Level 2 Expert

141 Answers

Are you a Quasar Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides