Question about Element Electronics FLX-2610 26 in. LCD HDTV

2 Answers

Blurry picture when hooked up to direct tv.Why?

I have an element 26 inch lcd I only use it for blu rays because it is somwhat blurry when hooked up to direct tv Why are channels blurry??

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First, determine if your set top box issue by your TV provider is HD capable. Then make sure you have at least a component connection between the TV and set top box, HDMI is the best. On top of all that, you must be viewing a HD channel which doesn't always provide content in HD 100% of the time.
If all of these are in place you should have a sharp, HD picture that rivals the BluRay movies.
NOTE: Not all providers are the same. There are different levels of compression used to send you the HD feed and this may also be a cause of "blurry" images.

Posted on May 15, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Try lowering the sharpness on your tv, because if the sharpness is to high it will make NonHD objects look blurry, also try changing the input cable or type of input.

Posted on May 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Element 32 in tv


Element 32 in tv - Fixya

www.fixya.com > Forum > Flat Panel Televisions > Element
38 mins ago - element 32 in tv Need a code to run the volume and on off shaw direct sat. - Element Flat Panel Televisions question.

Remote Control Code for Element LCD TV -- & Direct ... - Fixya

www.fixya.com/support/t1101060-remote_control_code_element_lcd_tv
Remote Control Code for Element LCD TV -- & Direct TV Haven't been able to find the right code to program the - Olevia LT32HVM 32 in. ... It is annoying to turn the TV on and the volume with the Element remote and then have to use the ..... Need the codefor a 42 inch LCD TV model ELDTW422 to program our Direct TV ...

Element 32" 1080p TV (ELDFW322): Unboxing & Setup ...

? 6:40
https://www.youtube.com/watch?v=EKtjBnx6EG0
Mar 27, 2013 - Uploaded by PureLegit
This is a new video on this TV that I got from Element. If you go back on my channel you will see my first ...

Jan 20, 2016 | Element Televison & Video

3 Answers

Sharp Aquos LC42d64u has blurry picture...


Hi,

Is it slow and blurry? if yes then return it to warranty immediately. The video processing circuits are malfunctioning and the repair cost is prohibitive if you must pay for it on your own.

I hope it is still under warranty. So, do not delay getting it into the Sharp Authorized facility or back to the retailer you purchased it from.


The connection cable you use could have something to do with it, but is should work on all formats. The best for reliability and absence of blocking is just analog composite - but that is also the lowest picture resolution. S-video is okey too, but it is analog as well. Component is the highest grade; going to hdmi is just another way of receiving the signal - I don't think it will effect the error correction problem in any way. My opinion.

Goodluck..

Feb 25, 2008 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

My picture is blurry,and words are blurry,what do i do


A blurry image on a high-definition LCD TV is typically the result of a mismatch between the TV's resolution capabilities and the resolution of the signal that is coming from connected devices, such as a DVD player or satellite TV receiver. Typically, blurry pictures result when a peripheral device connects to the TV through nonHD cables and jacks.

If your TV's connected devices do not have HD capability, they will transmit content to the TV in standard, analog signals. These types of signals are only capable of resolutions of up to 640 by 480 pixels. Pixels, for picture elements, are the tiny dots that make up the screen image. Most HD LCD TVs are capable of resolutions of as low as 1,366 by 768 pixels and as high as 1,920 by 1,080 pixels. When this big of a discrepancy occurs, the images display on the TV scaled, stretched and blurry.

Jan 24, 2015 | Televison & Video

2 Answers

Yamaha RX-V471 3D video for blu ray will not display on TV


Your Yamaha is the problem here. It cannot handle the signal and process the 3D as it states. What I would do is hook your player direct to your TV in the manner that it works and feed your audio from a different path to maintain surround system. Your tv/dvd player may have an audio out that you can feed back to the Yamaha .

Jan 11, 2014 | Yamaha Rx-v471 3D A/v Receiver

1 Answer

I have a Protron LCD 26" TV model#LT26CIPI...The tv was working great turned it off on night and in the morning turned it back on to sound but no picture just a Black screen...when you change channels


Since its a LCD take a flashlight and have the room as dark as possible and with the light look to see if a very very faint image of the picture can be seen or not---many of these sets use a "back light" for the brightness and if that's not on.......

Dec 11, 2012 | Protron PD-DVR100 DVD Recorder

1 Answer

I'm getting sound from my sharp tv when hook uo to my blu-ray player


If I understand when the blu-ray player is connected to the set you get the TV sound or what? If properly connected by way of a set of rear audio/video or component jacks to the same on the TV--you should if change the TV input to that location see the blu-ray and hear sound it sends out.

Component, composite, or what is the hook up between the two units?

Dec 05, 2012 | Sharp LC70LE640U 70-inch LED/ LCD TV

1 Answer

I want the best picture from my 50" LG plasma tv, and I just replaced my 47" LCD LG tv with this plasma and I am not impressed at all compared to my LCD. I guess my question is what a are the best picture...


to C_LATKA:
Hi, I recently bought a 47" LCD LG the latest model and I read that you had purchased it previously and I wanted to know how you found the quality of picture on the LCD? At the moment ours is a bit blurry. I hope it was worth buying. Do you think we just need to tune the picture quality?

Jan 07, 2010 | LG 50PX5D 50 in. Plasma HDTV

4 Answers

Subtitles keep coming on


Hiya, have bought an Alba 26" LCD TV myself today. If you go into the menu and then into subtitles change it from English to Dutch. This should solve the problem. :-)

Dec 13, 2009 | Televison & Video

1 Answer

New Sharp LCD tv LC42SB45UT just hooked up and


Try tuning it manually instead of Autostore...(check system if compatible)

Dec 08, 2009 | Sharp LC42SB45U 42 in. LCD TV

Not finding what you are looking for?
Element Electronics FLX-2610 26 in. LCD HDTV Logo

1,336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Element Electronics Televison & Video Experts

Cindy Wells

Level 3 Expert

5186 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Are you an Element Electronics Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...