Question about Philips 37PF7320A 37 in. HD-Ready LCD Television

1 Answer

Advertizement strip how do i get the ad strip off the housing cleanly.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 92 Answers
Re: advertizement strip

Hair dryer will help to peel it off clean but if your beyond that already peel as much away as you can and clean the remaining residue with alcohol or mineral spirits being very careful not to over do it you dont want any liquid to run between the screen and the frame. apply directly to the cloth not the screen and not alot of pressure if this is a LCD you could crack the screen then your f#$%ed

Posted on Jan 20, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Vizio e470i-a0 has a blank screen but has sound.

The led strip is faulty. Normally it's comes with the panel.
If you wish to know bout the Woking of back light LED the check the below added link.

Jul 01, 2016 | Vizio Flat Panel Televisions

1 Answer

Tv turns on, have sound and backlight but no picture. Used to turn on and no picture and replaced the T con board

Sounds like fault with T'Con. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.

Mar 15, 2016 | Flat Panel Televisions

1 Answer

I have a 42inch vizio and it is only 7 months old. today it will not turn on. it is plugged into a power protect strip cord, the power at my house did blink off for halk a second this morning.

Is anything else working that is plugged into the power strip? There is usually a breaker on the power strip (little button on the side) that may have been tripped. The other thing to check is try powering TV on using the TV power button and not the remote control.

Sep 12, 2011 | Vizio Flat Panel Televisions

1 Answer

No power when I turn on nd plug up the tv

Is the outlet you're using connected to a switch on the wall? Some houses have outlets that are 1/2 switch controlled.
Either try it in the other half of the outlet, or flip wall switches and try to turn it on again.
Or, if you're on a power strip, make sure it's turned on.

Feb 08, 2011 | Sanyo DP50747 50 in. Plasma TV

1 Answer

I have a Symphonic digital flat screen tv,we had a t-strom and it want come on anymore.

usally a tv will newer one will have surge protecter bulit in. try adifferent outlet in your house if you have it plugged to a strip outlets the strip is now garbage through it away and get anew one.the strip will have a surge protecter but its only good once.

Nov 19, 2009 | Flat Panel Televisions

1 Answer

My samsung hdtv has horizontal lines running across the top third of the screen. What is this and how much will it cost to fix??

screen is going down need new one or give this ago it might work mark on side of tv were about lines are this will help locate witch strip wire that is faulty

Unplug tv and take back off you will see on the sides of the screen inverter boards with firley wide ( Brown strip wire ) going into them and were your lines are on screen lift or flickup the locking clip on that strip clean strip and board conection

RECONECT IS REVRES make sure strip wire is located corect and locked if worked will save you money if not you will need screen

Nov 07, 2009 | Samsung TXT3093 30 in. Television

1 Answer

32" visio tv tripping power throughout the house

I would have an electrician check to see if you have a grounding issue. Especially at the outlet that you have the power strip supply plugged in, Check to see what kind of your circuit panel is going to trip for electrical arc or electrical short. Newer panels should have both. Older just for electrical short. Have your electrician make sure your wiring is entirely copper, if it isn't and it's aluminum. Have him make sure the outlets are aluminum rated, and not designed for copper. Defintely check grounding. Good Luck

Oct 27, 2008 | Vizio L32 32 in. LCD HDTV

2 Answers

6632lg hdtv won't turn on

No stanby LED would indicate a power supply problem. check the main fuse and the 4 large diodes next to the fuse. one is common to short out and blow the fuse. i think D603

Hope this helps

Jun 29, 2008 | Sylvania Flat Panel Televisions

1 Answer

Lamp replacement

You defiantly need to get the stripped screw out. When I encounter a stripped screw, I use my dremil tool with a cutting wheel on it to cut the screw off. After you do finally get the screw cut off ( and this can defiantly be a pain straken ordeal ) you should be able remove the remaining screw bottom with a pair of needle nose pliers. Replace the lamp at that point and find a screw with a bigger diameter ( a serf tapping would work well ) and tread it back. Good Luck. I do know you are in for a frustrating time, but with a lot of Patience, you'le do well.
NC Electronic
Mills, Wyoming

Jan 26, 2008 | Hitachi 50V500 50 in. HD-Ready LCD...

2 Answers

Problem with sound and picture

sond slike bad tv almost is your power strip grounded well bets one is monster clean power clean up older homes power so dirty in usa cuses flat screens to die out elery if u have up down voltage in house also cheak hd antenna whos your cable from charter or dish

Nov 26, 2007 | Akai CFTD2011 20 in. EDTV-Ready LCD...

Not finding what you are looking for?
Philips 37PF7320A 37 in. HD-Ready LCD Television Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66487 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

4518 Answers

Are you a Philips Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides