Question about Sharp LL173C 17" Flat Panel LCD Monitor

2 Answers

Power button won't turn monitor off?

Hi - I have a wierd problem - when I try to press the power button to turn off the monitor nothing happens. If I press any other button I get the "Adjustment Lock" appearing on the screen. I tried press the Power button and the Menu button at the same time and holding it but still nothing. When I cut the computer off - the monitor act normal and the monitor goes into the sleep mode and the orange light come on. When I turn the computer back on the green light comes back on and the monitor is fine. I would just like to be able to adjust the screen controls and maybe sometime turn the monitor off. Any help you could offer would be greatly apprecated.

Posted by on

  • Rob1 Oct 19, 2007

    Hey to plead ignorant - but what is a tact switch?

  • Rob1 Oct 19, 2007

    Hate to plead ignorant - but what is a tact switch?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Alternative : Download Turn Off Monitor Utility from http://www.monitoroff.com

Posted on Sep 22, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 93 Answers

Ok,your monitor is in  a very simple problem.clean the control panel circuit of your monitor,or if it is not working replace the tact switch in your monitor.

Posted on Oct 19, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi, I turned my computer and monitor off as I normally do last night and when I came downstairs this morning to turn my computer and monitor on, my monitor didn't turn on. I pressed the power button on...


You need your monitor repaired or replaced.
Unlike a computer, there is not much troubleshooting beyond making sure it is plugged into a live outlet and turned on which you did already.
Good luck!

Jul 19, 2011 | LG L194WT 19" LCD Monitor

1 Answer

My Eee PC 1000H is turn on but the display is off. i try to turn off by pressing the power button but nothing happen. when i plug the AC/DC power cord, eee pc is turning on but lcd still black


Hi,

Welcome to FixYa!

It seems that you are having problem with the LCD on the laptop. This may cause by an electrical charge in the motherboard itself,Im not really sure how it affects the display of the computer.There's also a possibility that the problem is with the LCD cable or the LCD itself. Please follow this method since it usually fix such problem like that,

1.Removed the battery then unplugged the AC adapter

2.Press and hold the power button or the ON/OFF button for at least 30 seconds

3.Connect the power supply back to your computer then turn it back on.

4. Check if you will see any difference.

5. If nothing happens, try to press and hold Fn and F2 on the keyboard.

If nothing happens, there is a possibility that the problem is with the LCD or monitor itself, maybe it will need a replacement...

I hope this information will be helpful. Thank you for using FixYa...

May 24, 2011 | ASUS Eee PC 1000H Laptop

1 Answer

I have a blank screen when I turn it on and nothing happens but the sound works.


hi,

can you please try to power drain the laptop, removed the battery and the unplugged the charger then press and hold the power button or the on/off button for 15 seconds, obviously it will not turn on since there is no power supply connected, after 15 seconds, connect the laptop direclty to the power outlet without using the battery just for the meantime, then power on the laptop, see if theres any difference, if nothing happens, there is something wrong woth the monitor itself.


Hope this will help...

Jan 19, 2011 | Acer Aspire One PC Notebook

1 Answer

Dell 2007FPB LCD Won't turn on nothing happens when the power button is pressed


Hi and welcome to FixYa!

As a first course please check the monitor power cable. It may be a little loose that's why its not powering up.

Hope this helps and thank you for using FixYa!

Dec 02, 2010 | Dell UltraSharp 2007FP (Black) 20.1 inch...

3 Answers

My laptop fell down and now my screen does not display anything


try to press and hold Fn and F8 - this is to toggle screen setting to ext and back to LCD on laptop. if nothing happens turn off computer by pressing power button, unplug the ac adapter, remove the battery. remvoe residual electricity from computer by pressing power button 10 times. just plug again the ac and leave the battery out. Pres and hold the letter D and while holding that press the power button once and release both of them. it will perform the built in self test on the lcd. if nothing happens, turn off computer. press anf hold Fn and while holding it press power button. it will perform diagnosis on computer. if still nothing happens need to repalce motherboard and LCD.

Mar 03, 2010 | Dell Inspiron 6000 Notebook

1 Answer

Dell Inspiron 1526 blank screen after hibernation


Press Fn Key plus POWER key ans see if the diagnostics will start. If no go, then the system is likely in a No POST state.

You can check the warranty status here:

http://support.dell.com/support/topics/global.aspx/support/my_systems_info/details?c=us&cs=04&l=en&s=bsd&~ck=anavml

and no paperwork is needed to get warranty support, all you need is the express service code on the bottom and be a authorized user of the system.

Oct 21, 2009 | Dell Computers & Internet

1 Answer

In power save mode


The monitor is not receiving signal from the computer. Is the power light on on the computer? If so - press and hold power button on computer until the power light goes off, then press again to restart. If the computer starts and you still have no picture it is most likely a video card or motherboard problem.

Nov 17, 2008 | Dell E173FP 17" LCD Monitor

2 Answers

How to turn off burn-in mode if botton on Monitor


I didn't have the monitor connected to the computer, and that's why the power button was unresponsive. After connecting it, the solution above worked for me.(My KVM switch was set to a computer that was turned off)

Oct 07, 2008 | Sceptre DCL9a

Not finding what you are looking for?
Sharp LL173C 17" Flat Panel LCD Monitor Logo

669 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Computers & Internet Experts

Jason Harris
Jason Harris

Level 2 Expert

271 Answers

Ricky Ostrom
Ricky Ostrom

Level 2 Expert

274 Answers

pontelemon
pontelemon

Level 3 Expert

538 Answers

Are you a Sharp Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...