Question about Microsoft Windows XP Home (vis-winxph) for PC

2 Answers

How to establish LAN

HOW to establish a lan. so that i able to acees internet on all computer through server.plz tell me in detail.
thanks & regards

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 186 Answers

You can use Proxy Server for the same.
One of the most popular proxy servers available for Windows based systems is WinProxy. One of the reasons for its popularity is that no software has to be installed on the client systems. This is possible since WinProxy is a transparent proxy server meaning that it also provides NAT (Network Address Translation). Due to this the client system is virtually unaware of the existence of the proxy server. Apart from the usual caching and security features it also supports important protocols like HTTP, Real Audio/Video, Mail, FTP, NNTP News, Telnet, Socks, Secure Sockets, DNS, IMAP 4, etc. The WinProxy Server may be installed and configured as follows as follows:

  1. Install the TCP/IP protocol on all systems connected to the network.
  2. Run the Install Wizard. The first screen is the product registration screen which require you to enter the product key.
  3. The next two screens require information about your Internet connection. Select the type of connection and the name of your connection.
  4. Enter the username and password of the Internet connection to be used.
  5. WinProxy then configures the internal and external IP addresses. It automatically assigns a unique address to each device on the LAN as internal addresses. The IP address assigned to the modem/router by your ISP is taken as the external address.
  6. WinProxy then prompts you to disconnect from the Internet if you are already connected.
  7. In the final step WinProxy works through all the steps and verifies that all operations have been performed properly.

Posted on May 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 385 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to monitor internet brwosing on WLAN & LAN


Install free vnc server on the computer you wish to monitor and vnc viewer on your own computer.
There are various flavours of the vnc programme and most are free to download. try cnet.com

Mar 04, 2014 | Computers & Internet

1 Answer

My server has 2 NIC one of them connected to the router (ISP) and one of them is connected to the LAN.But DHCP and DNS working but there is no internet to the Host and also the server itself.when i...


Hello,

This is more a configuration error. Depending on how you have your DHCP setup, you may need to adjust it's setting. No mention of what os you are using but if you set your DHCP to give IP addresses only to the LAN, set the ISP NIC address to receive its ip from the ISP provider, you should be able to get Internet access to your server and the LAN.

If you have done so, use the server os to setup your Internet connection. Answer a few questions about how you connect to the Net and the os will do most of the configuration for you.

Good Luck
C2Solutions

Jan 24, 2011 | Dell PowerEdge 1800 Server

1 Answer

L can`t get into facebook in iran


use a proxy server, some internet provider block certain websites. you can usually fix this by using proxy server.
http://www.hidemyass.com/proxy-list/
that website offer proxy servers for free.

if this website is also block try this servers.
208.92.249.118 port 80
66.197.164.213 port 80
157.95.56.15 port 80

Web browser instructions
  • Mozilla Firefox: Tools > Options > Advanced > Settings > Manual proxy configuration.
  • Google Chrome: Tools > Options > Under the bonnet > Network > Change proxy settings > LAN settings > Use a proxy server > Advanced > HTTP.
  • Internet Explorer: Tools > Internet options > Connections > LAN settings > Use a proxy server > Advanced > HTTP.
  • Opera: Tools > Preferences > Advanced > Network.

Dec 14, 2010 | Facebook Social Network

4 Answers

Error 336 (net::ERR_NO_SUPPORTED_PROXIES): Unknown error.


You can report this crashes to Google, and let the Google will answer this problem.

How to Report it?
By Clicking the link below
http://www.google.com/support/chrome/bin/request.py?contact_type=gccrash

Jun 02, 2010 | Google Chrome

1 Answer

At Startup I get the message: 'Service Control Manager - At least one service or driver failed during system startup. Use event viewer to examine the event log for details.' Everything boots up fine, but...


I would uninstall the external lan driver and the go to dell website (on another PC if you have to )and get the latest update for that lan card. a good easy starting point.

May 28, 2010 | Dell PowerEdge 1800 Server

1 Answer

Best Server Specification !!!!!!


You can use Linux Base HP-UX 11i Version 3 Server

Aug 24, 2009 | Computers & Internet

1 Answer

Lan problem


You LAN is not connecting to your Internet Service Provider, hence the LAN has a red X and therefore cannot open a WEB page.
Check your LAN cable, make aure it is connected to both the LAN port on the modem and the LAN port on the computer.
The red X on the LAN should disappear when the network connection is re-established.
Also power off your modem for 1/2 min, and power it on again and restart your computer.
Let me know if you have further problems and any error messages.

May 21, 2009 | Acer Aspire 5500 5570-2609 Laptop

3 Answers

D-link cant accesed internet 4pc


Most of DSL modems are connected to PC with USB cable...
n if ur server is connected with other pc on lan .. you can use internet sharing option available in winxp.

Following are the steps to enable Internetsharing for other pcs.


How to use Internet Connection Sharing loadTOCNode(2, 'summary'); To use Internet Connection Sharing to share your Internet connection, the host computer must have one network adapter that is configured to connect to the internal network, and one network adapter or modem that is configured to connect to the Internet.

On the host computer loadTOCNode(3, 'summary'); On the host computer, follow these steps to share the Internet connection:
  1. Log on to the host computer as Administrator or as Owner.
  2. Click Start, and then click Control Panel.
  3. Click Network and Internet Connections.
  4. Click Network Connections.
  5. Right-click the connection that you use to connect to the Internet. For example, if you connect to the Internet by using a modem, right-click the connection that you want under Dial-up.
  6. Click Properties.
  7. Click the Advanced tab.
  8. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection check box.
  9. If you are sharing a dial-up Internet connection, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.
  10. Click OK. You receive the following message: When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP
    address 192.168.0.1. Your computer may lose connectivity with other computers on
    your network. If these other computers have static IP addresses, it is a good idea to set them
    to obtain their IP addresses automatically. Are you sure you want to enable Internet
    Connection Sharing?
  11. Click Yes.
The connection to the Internet is shared to other computers on the local area network (LAN). The network adapter that is connected to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0

let me know if it helps.

best regards,



Nov 03, 2008 | D-Link DGS-1008D 8-Port Gigabit Ethernet...

1 Answer

How to proxy block web site


Go to Internet >> Tools >> Internet Options >> Connections >> LAN Settings >> In the proxy server section go to Advanced and use the space named as exceptions to specify the sites that u want to block

Jan 02, 2008 | Computers & Internet

1 Answer

Lan


you need to install the driver of your lan coming from your motherboard cd in order to repair this. after installation you must reboot

Dec 19, 2007 | EliteGroup GeForce 6100SM-M Motherboard

Not finding what you are looking for?
Microsoft Windows XP Home (vis-winxph) for PC Logo

490 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...