Question about Siemens Gigaset 8825 Cordless Phone

1 Answer

Getting a new mobile in the registration mode with my Gigaset 8825 base station.

My new mobile displays the word "searching".  How can I get it to the "Please Register" screen?  Thank you.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer got voted for 20 times.

  • Expert
  • 106 Answers
Re: Getting a new mobile in the registration mode with my...

You need to register the handset to your base. Its easy, but first you need to clear the setting on the handset. Do this by pushing Menu, scroll to base system settings, push OK, then scroll to Base station 1, push OK, then scroll down to deregister, push OK twice, then press End. The handset should now say "please register", of which you can press OK, enter your pin or 0000 and the display should be flashing "registering base station 1". Now quickly, at your base push Menu, scroll forward to system settings, push select, enter your pin or 0000, then select. Push select again and the display should say "registering HS". Now, both displays (base and handset should say registering), keep your eyes on your handset display, once it "shakes hands" with the base it will prompt you to select an intercom number, you can just push OK. If you have problems, repeat the steps or you can download a manual for free at

Posted on Feb 11, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The lights on the base station are not working. Yes, I have checked the owners manual.

The power supply of the base station is working correct? the cable from the power supply is not broken? and the cable from the power supply is inserted?
Just a few questions, things I would start with when my base station wold not have any lights.
Oops the base station of my Siemens Gigaset S79H does not have lights.

Jul 22, 2014 | Siemens Gigaset 8825 Cordless Phone

1 Answer

Change recorded message

Please follow the steps:
1. Press MENU
3. Scroll to "GREETINGS?" and press SELECT
4. Scroll to type of desired message and press SELECT
5. Scroll to "RECORD GREETING?", and press SELECT
6. Record a message or greeting through the base speakerphone or base station handset. 7. Press SELECT to play back greeting/ message.
NOTE: To avoid background noise, record message through the corded handset.

Sep 12, 2009 | Siemens Gigaset 8825 Cordless Phone

2 Answers

Siemens Gigaset A260 cordless phone fail to register

We've tried to register the Siemens A260 handset to the base but it continues to flash "Base".. and does not work.

Jun 19, 2009 | Siemens Gigaset 8825 Cordless Phone

1 Answer

Gigaset 8825 cordless phone pin reset

The default PIN for base and handsets is 0000 - if it has not been changed
  • Press Menu on Handset
  • Scroll to Mobile Settings - press ok
  • Scroll to Local Settings - press ok
  • Scroll to Chang Pin - press ok
  • Enter Current handset PIN - press ok
  • Enter New PIN - press ok
  • Display will show Confirm - Reenter PIN - press ok

Sep 15, 2008 | Siemens Gigaset 8825 Cordless Phone

1 Answer

Gigaset 8825 new

They are not manufactured anymore, but you can buy used ones off Ebay.

Jul 07, 2008 | Siemens Gigaset 8825 Cordless Phone

3 Answers

LCD display screen replacement for Siemens 8825 phone base

Yes we have new ones we sell to the do it yourselfers or you can send it in for repair and we do some updating and put in a new display. You can find us by googling Siemens cordless telephone repair and look at the non-sponsored links.

May 30, 2008 | Siemens Gigaset 8825 Cordless Phone

1 Answer

Registering a base station of Siemens Gigaset 2415 Cordless Phone

To register your handset to that base station, you must put the base station in registration mode at the same time you put the handset in registration mode. This is how you do it. At the handset you push OK when it asks you to register. If it asks you for the pin enter 0000 (factory pin) and push OK. The handset should say "registering base 1". Then at the base press the page/reg key down until it flashes (its to the immediate right of the cradle where you rest the handset for charging). That puts the base in registration mode and now its looking for the handset and vise versa. Now watch your handsets display. If it asks to to select an intercom number, then push ok and your done. If it says "invalid pin" then you need to reset your pin on your base (thats a different problem see below). If the handset times out and never registers, you need to repeat the process a couple times, you may have a bad base or it needs to be defaulted. If you need more help you can download a manual for free or get free technical help at the link below.

If you need to default your pin, you can do so but it will default the base station to factory settings. To do so remove the power from your base, hold your page/registration key down, and apply power back to the base. Count to 15, then let off the key. Turn off the power, count to five, then apply power again and follow the steps again to register the handset and you will need to reregister every handset that was previously running on it.

Feb 02, 2008 | Siemens Gigaset 2415 Cordless Phone

2 Answers

Power supply gigaset 8825

The power supply for the 8825 base is to be 13 volts AC, rated at 850 milliamps or higher. You can go anywhere from 13 up to 15 volts without hurting the unit, and a higher current rating is even better. We actually make them ourselves through bulk purchases of varieties of power supplys. Your next delimma will be the plug size, it is a pretty common size, most universal adapters will have the right size of the outer and inner connections.

Nov 16, 2007 | Siemens Gigaset 8825 Cordless Phone

1 Answer

Siemens 8825 gigset 2 line phone

If your system was working fine, and it all of a sudden started doing this, it sounds like your base has taken a surge of some kind. Your base needs replacing. You can try re-registering the handsets, but from my experience the problem is fatal. Now if this is a new installation and the handsets never work yet on the base, you just need to register them. You can download the manuals or get tech tips at Siemens website, gigaset FAQ pages.

Sep 04, 2007 | Siemens Gigaset 8825 Cordless Phone

2 Answers

I need reset pin number

To reset your pin on your base station, you push Menu, scroll to System Settings, DON'T PUSH SELECT, push * 6 5 # That will reset the pin.

Aug 17, 2007 | Siemens Gigaset 8825 Cordless Phone

Not finding what you are looking for?
Siemens Gigaset 8825 Cordless Phone Logo

599 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Phones Experts


Level 3 Expert

94113 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Siemens Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides