Question about Office Equipment & Supplies

Open Question

Staples spl 710sh shredder

Safety switch broken

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

goalie39
  • 469 Answers

SOURCE: what is the interlock for a staples shredder

if you look at the underside of the shredder, you will likely find a pressure switch that is actuated when it sits on the stock bin, either modify it to touch when on the new bin or secure it so it is depressed all the time. This should allow it to operate on the replacement bin.

Hope this is of some help.
Ed

Posted on Apr 20, 2009

  • 1 Answer

SOURCE: staples spl-710sh paper shredder stopped shredding

This exact thing has happened to my unit as well. Ive disassembled it to discover that 5-7 teeth on the gear that the motor drives have been stripped off. Unless the gear can be replaced (which is probably not worth the expense), then the unit is toast. Sorry. Good luck.

Posted on Nov 01, 2009

  • 41 Answers

SOURCE: Looking for replacement gears and spacer for a

email your sn on shredder and fax no

Posted on May 10, 2010

  • 1 Answer

SOURCE: Runs continuous when turned on, but stops when paper is inserted

I owe this to a Steve-EE.

Mine was the LED where the paper feeds. $1.69 for a 2 pack.
http://www.radioshack.com/product/index.jsp?productId=3107633

Posted on Jul 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Staples Shredder model SPL-TXC6A (serial 0809026807), which I have been using a lot lately. The auto and reverse buttons will not function, & neither will the forward button.


If you have used it a lot, it may have tripped the thermal fuse. Normally, these reset themselves. One thing to make sure of,, is that the safety switch under the machine is firmly on the pin in the basket under it.

This is a light duty shredder, you can only use it for two minutes!

6-sheet, light-duty, up to 25 uses/day
Runs 2 min on / 4 min off


http://www.snoopdeal.com/bargain/43085/Staples-SPL-TXC6A

Nov 21, 2016 | Office Equipment & Supplies

1 Answer

Need parts for spl-710sh sheredder


Some parts are available at electronics stores (Radio Shack) and can easily be installed by you. Another thing is how old is it and how long is the warranty? Staples should honor that warranty if it is still within the time frame of the warranty. Otherwise, it may be cheaper in the long run. Not knowing WHAT parts you need is the key element here.

Jan 17, 2014 | Office Equipment & Supplies

1 Answer

Runs continuous when turned on, but stops when paper is inserted


I owe this to a Steve-EE.

Mine was the LED where the paper feeds. $1.69 for a 2 pack.
http://www.radioshack.com/product/index.jsp?productId=3107633

May 09, 2010 | Staples SPL1050LBRX (CrossCut) Shredder

5 Answers

Staples spl-710sh paper shredder stopped shredding


This exact thing has happened to my unit as well. Ive disassembled it to discover that 5-7 teeth on the gear that the motor drives have been stripped off. Unless the gear can be replaced (which is probably not worth the expense), then the unit is toast. Sorry. Good luck.

Jun 16, 2009 | Office Equipment & Supplies

1 Answer

What is the interlock for a staples shredder


if you look at the underside of the shredder, you will likely find a pressure switch that is actuated when it sits on the stock bin, either modify it to touch when on the new bin or secure it so it is depressed all the time. This should allow it to operate on the replacement bin.

Hope this is of some help.
Ed

Apr 20, 2009 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...