Question about Zhone (6218-I2-200) Router

Open Question

Wireless protected setup - Zhone (6218-I2-200) Router

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find wps button on Netgear WNR834B


The Netgear WNR834B does not support WiFi Protected Setup (WPS).

You can follow the documentation in the manual to setup WPA-PSK (Pre-Shared Key) and use the key to add devices to your wireless network.

Manual: http://documentation.netgear.com/wnr834b/enu/202-10171-01/pdfs/FullManual.pdf

Jun 24, 2014 | Arris SURFboard SBG900 Wireless Router...

Tip

Belkin F5D7234-4 v1 (important thing)


In Belkin f5d7234-4 v1(only version 1) router, do not disable "WiFi protected setup" learn more about wps
  • If you do so, then the router will no longer work in 90% of cases.
  • The WiFi protected setup is enabled by default in this model.
  • The computers using XP,vista,win7 may not connect to the wireless network. 96cff88.jpg
Solution:
In that case you can add the wireless network manually in the computer.Still if it says error message as "windows cannot connect",then follow these steps according to your operating system.

WINDOWS XP:
Start>
Control Panel>Network and Internet Connections(Network connections)>Right Click Wireless Network Connection icon>Click on Properties>authentication tab>uncheck IEEE authentication

WINDOWS VISTA:
Start>
Control Panel>Network and Internet (Network and Sharing Center)>On your left hand side click on Manage Network connections>Right Click on Wireless Network Connection icon>Click on Properties>authentication tab>uncheck IEEE authentication

WINDOWS 7:
Start >
Control Panel>Network and Internet (Network and Sharing Center)>On your left hand side Click on Change Adapter Settings>Right Click on Wireless Network Connection icon>Click on Properties>authentication tab>uncheck IEEE authentication

  • Now try to access wireless network.
  • If it still says windows cannot connect then no other go.
  • You need to disable WiFi protected setup.This will fix the issue for sure...
Click here to know how to disable wifi protected setup...

To learn more about WiFi protected setup, please click here...

on Apr 19, 2010 | Computers & Internet

1 Answer

Where can i find the 8 digit setup key number on a tv


if you are trying to find 8 digit number on your t.v. then you need to go to wlan settings on your t.v. and click on wireless protected setup . there , now you will able to see your 8 digit pin

Jun 20, 2014 | Linksys Wireless-G WRT54G Router

1 Answer

Wi fi protected setup


In the printer setup, wireless is on? No list of available wireless networks? Do you have to make the printer discoverable? You didn't supply the Model of Brothers printer?

Jan 26, 2013 | Actiontec GT704WG Wireless Router...

1 Answer

Loss the setup CD-ROM


A setup CD isn't needed to setup the linksys wireless router.
To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jan 01, 2013 | Linksys (WRT54GC) Router

1 Answer

Need to password protect network


Open the router setup page with address 192.168.1.1
Username =nothing leave this blank and password is
ADMIN and then go to
the wireless security settings.
Select WEP or WPA
enter the password and save the settings.
Reboot the router after that and now your wireless signal is password protected


Wireless Security

Dec 10, 2011 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

I wanna protect my connection from outside users i dont know how to protect it !! please help me out!


You listed your problem ubder: modems. A modem you do not need to protect further. You can only use the connection by hooking up a cable to it. If you have a wireless router connected to your modem that should be secured. You do this by entering a security code in the setup of the router. just enter the router's IP address in your web browser, log in to it,go to the security tab under wireless setup and enter a security code. (write it down because you will need it to connect wireless). You can not connect to it without this code. This way your wireless connection is secured and can not be used by outsiders.

Feb 10, 2011 | Computers & Internet

1 Answer

How do i enter a PIN for protected setup?


WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works


Regards
TOM

Dec 22, 2010 | Belkin F5D7234-4 Router

1 Answer

Having trouble with initial connection to an existing wireless network wireless router is a cisco wireless-n broadband router and we have 2 laptops and a printer on a wirelss network already


Follow these instructions to connect to a wireless network using the Linksys Wireless Manager.

Step 1:
Launch the Linksys Wireless Manager. To learn how to access the Linksys Wireless Manager, click here.

Step 2:
In the Connect to a Wireless Network screen, locate the name of your wireless network in the list.
NOTE: If your wireless network is not in the list, click here to learn How to Connect to a Hidden Wireless Network. If your wireless network supports Wi-Fi Protected Setup kb17673-005_en.png, click here to learn How to Connect Using Wi-Fi Protected Setup.

Step 3:
Select your network. Then click Connect.

Nov 01, 2010 | Linksys WUSB54GSC Compact Wireless-G USB...

1 Answer

Linksys WRT160 router doesn't work


Wi-Fi Protected Setup Button
If you have client devices, such as wireless adapters, that
support Wi-Fi Protected Setup, then you can
use Wi-Fi Protected Setup to automatically
configure wireless security for your wireless
network(s).

To use Wi-Fi Protected Setup, run the Setup
Wizard, or refer to the “Wireless > Basic Wireless
Settings” section of “Chapter 3: Advanced
Configuration".

Wi-Fi Protected Setup LED (Blue/Amber) It
lights up blue when wireless security is
enabled. The LED flashes blue for two
minutes during Wi-Fi Protected Setup.
The LED lights up amber if there is an error
during the Wi‑Fi Protected Setup process. Make
sure the client device supports Wi‑Fi Protected
Setup. Wait until the LED is off, and then try again.
The LED flashes amber when a Wi‑Fi Protected
Setup session is active, and a second session
begins. The Router supports one session at a
time. Wait until the LED is off before starting the
next Wi-Fi Protected Setup session.

Jan 01, 2010 | Linksys WRT160N Wireless Router

Not finding what you are looking for?
Zhone (6218-I2-200) Router Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zhone Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Tejodhar Atreya...
Tejodhar Atreya...

Level 2 Expert

314 Answers

Are you a Zhone Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...