Question about Electric Mobility Health & Beauty

Open Question

Gladiator gt flashes 5 times wont move

Gladiator gt stopped and won't move when key is turned on the unit flashes 5 times

Posted by on

  • Bernard Beranger
    Bernard Beranger Jan 03, 2014

    further info I was driving along and came to a bunch of leevse covering the sidewalk and my gladiator came to a stop and I got some help to push the unit home and it has not worked since Itried charging batteries , tried resetting fuse , cleaned batt connections nothing no joy at all

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

gewiz
  • 1263 Answers

SOURCE: how to fix scooter when red light flashes 5 times

hi, i need you tell me what controller type is fitted to that scooter before i can be more precise with fault info ,, the controller is a black, or blue or silver box located under the rear cover of the scooter ,, the wires lead to this unit...

Regards
Rob

www.gewizrepairs.co.uk

Posted on Apr 12, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My scooter wont go all of a sudden and the red light on the console is blinking a sequence of 4 times


Amigo Scooter Oxygen Tank Holder Light flash key turned ...

www.fixya.com > ... > Amigo > Amigo Scooter Oxygen Tank Holder
... key on my phoenix 3 scooter the red light flashes 5 times and the scooter will ...scooter wont move,although on the little speedo there is a red light flashing on ... ...light is flashing when the key is turned on. the scooter does not move at all ... flash up and down the console light and you at this point have to turn the key off ...

My pharmore wizard diagnostic light flashes 9 times and my ...

www.fixya.com/.../t25197681-pharmore_wizard_diagnostic_light_flashe...
Oct 8, 2014 - my pharmore wizard diagnostic light flashes 9 times and my scooterdoes not go, can someone help me please - Mobility Scooters question. ... Have no manual for pharmore 4 wheeled wizzard light on but wont move ... Why did it stop working suddenly and is blinking console light in 5-blink sequence?

Jan 31, 2016 | Video Game Consoles & Games

2 Answers

Aiwa XR-EM50


This was easy.. download the manual here:
http://www.nodevice.com/download/user_manual/aiwa+xr-em50.html
From the manual:

Clock Adjustment: (Page 7)

Setting the clock
1 Hold down SHIFT and press CLOCK on the remote
control.
When the unit is turned off, you can also press SET.
2 Within 6 seconds, press "< <" (rewind icon) or > > (fast forward icon) to set thetime.
Each press changes the time in 1-minute steps.
Holding these buttons down will vary the time in 10-minute
units.
3 Press SET.
The time display stops flashing and the clock starts from
00 seconds.

When setting the clock on the unit in stop mode, hold down
"square" (stop icon) and press "> >" in step 1. After setting the time in step 2,
press TONE in step 3.

To display the time while the power is on
Hold down SHIFT and press CLOCK on the remote control.
The time will be displayed for 6 seconds.

To switch to the 24-hour standard
Display the time and press s within 6 seconds.
With each press, the clock alternates between 12- and 24-
hour standard time.

Tip:
In the 12-hour standard, "AM12:00" indicates midnight and
"PM12:00" noon.
If the clock display flashes when the unit is turned
off
There has been a power interruption. Reset the clock.


Bass / Treb Adjustment: (Page 11)

1) Press BAS or TRE
2) Within 6 seconds, turn VOLUME (press VOLUME +,- on the remote control).
Each level can be adjusted from "-2" to "+5".

Good Luck!

Apr 07, 2014 | Audio Players & Recorders

1 Answer

Touch screen calibration


Press the keys listed below, please note you need to press the Clear/Stop key 5 times. The screen will change after entering the keys and touch screen calibration will be option number 1. The calibration will consist of pressing a couple of small circles on the screen.

Clear Modes->1-9-9-3->Clear/Stop(5 times)
or
Reset->1-9-9-3->Stop(5 times)

Feb 17, 2014 | Ricoh Aficio MP C4500 Copier with Print,...

1 Answer

Electric blanket flashing f won't stop sunbeam


Hello vinrocof - Please try resetting the unit by either unplugging it or flipping the breaker off. Wait approximately ten minutes and turn the unit back on. Try setting the time and if it proves to be ineffective, the unit may possibly have a faulty EOC, defective wiring harness or damaged cord. I would suggest contacting a professional to move forward accurately.

Jan 13, 2013 | Frigidaire FEF336BC Electric Kitchen Range

1 Answer

Need to bypass the security fob. Won't start


You can bypass the fob IF you know the security code.

DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Nov 08, 2012 | 2007 Harley Davidson FLHX Street Glide

2 Answers

Well, my Netbook scrolls down randomly. Either up or down. No matter what I do it won't stop, I usually bang on the directional keys and it does stop for a short period. I really don't want to keep...


Sticky keys might be the problems.
1.Press SHIFT 5 times repeatedly
2.Cleanup the touchpad on the right corners ( unit OFF )
3.Seem the PgUp and PgDn keys STICKY >>> try clean it with a dry soft brush

Aug 16, 2011 | HP Mini 1000 Netbook

1 Answer

My key remote to lock the doors suddenly stopped


hi yes this can be done, here is how
make sure you have all keys ready to reprogram close all windows and doors insert key into drivers door lock within 5 seconds of putting key in door lock turn key to unlock position 3 times this puts the key into programming mode ( door led should be on ) press and hold lock button, within 5 seconds of holding lock button press unlock button 3 times ( keeping lock button pressed at same time) then release lock button that should be it...to make sure correct programming is achieved key led flashes 5 times, and door led flashes 6 time, if you have more than one key do same as above within 15 seconds of doing the first key..
phew..lol, well i hope that will work for you..please vote thanks

May 14, 2010 | 2007 Ford GT

1 Answer

Check engine on jeep grand cherokke 1995


Try again and verify, for example.
3 flashes,pause,then 3 more, is 33. etc.
5 flashes, pause 5 more, is code 55.(end of message)
always 2 digit number, then slightly longer pause in between those 2 digits.

Feb 23, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Yamaha Gladiator SS stops when it's raining.


HAVE YOU TRIED CHECKING THE AIR FILTER FOR WATER OR WATER IN THE FUEL

Aug 25, 2009 | Yamaha Gladiator SS Motorcycles

1 Answer

99 Grand am Security light comes on every time and car wont start


you cant disable the unit.. it is integral with the engines computer.. turn the key to the on position and leave it for 10 minutes.. the security light should stop flashing in 10 minutes or so , when it does , start the vehicle.. if it is a recurring problem , replace the ignition lock cylinder as it is a common problem with these cars.

Jun 29, 2009 | 1999 Pontiac Grand Am GT

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Mobility Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

Colin Taylor

Level 2 Expert

346 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

278 Answers

Are you an Electric Mobility Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...