Question about Canon ImageRUNNER 3570 Copier/Printer
My ir3570 shows error E000602-0102 as soon i switch on the machine and stops copying. what does it mean? How to avoid this error?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: CANON IR C6800
Hello Jc.Let me start by saying that despite the fact that you have properly been specific with the error code you have submitted, Canon is "fairly" specific in regards to the amount on detail in provides. I say fairly in really loose terms. The error 602 means that for any number of reasons when the copier went to boot" (begin to start up and read its directions as to what it is, who it is, and what it is capable of, it failed to get the instruction set (or failed to recognize the instructions) and therefore said "what"?!) as the copier sought to retrieve this info from the hard drive.That can mean that the partition of the hard drive that is was looking at contained corrupt information, or there was a communication interruption, or that the hard drive is going or gone bad. I know this sounds like a bunch of technical goblidy gook but you don't want to know what the 0101 means after the 602. It may not be too bad but brace yourself for the worst. That is that the hard drive may have went wheels up, or at a minimum all stored custom information is gone. The latter may be the best you can hope for. I am afraid that a "hail Mary" might be to power the copier of by way of the rear switch (or unplug if you are not familliar) and wait a few minutes.Restart and hope for he best. Otherwise you WILL need a technician to replace the hard drive and then they will have to reload the system software. I was reluctant to respond to your request for help as I cannot "fixya" and I will get a bad grade from the guys that run this site since I left ya hangin. But I could not resist trying to help you and to at least make sure you did not get raped by some "hungry for money" company. Please at least give a decent rating and I will keep my fingers crossed for you..................SPINAL
Posted on Jan 25, 2008
This is hard drive failure. If you another code other than 003 you may have gotten away with a scan disk, but not always. in your case the hard drive has died. a Canon Technician will need to replace it and re-install the machine's system software
Posted on May 08, 2008
this error is related to machine hardisk problem/failure,,It needs hardisk replacement with IR 3570 sytem software You need to contact your service provider to fix this problem
Posted on Jul 19, 2009
Tips for a great answer:
Aug 04, 2016 | Canon ImageRunner 3570 | IR3570 |
Feb 15, 2016 | Canon IR3570 COPIER FOR 220 VOLTS ONLY
Feb 20, 2011 | Canon imageRUNNER 3300 All-In-One Laser...
Nov 24, 2010 | Canon Office Equipment & Supplies
Jul 19, 2009 | Canon Office Equipment & Supplies
Jan 23, 2009 | Office Equipment & Supplies
Mar 13, 2008 | Canon imageRUNNER 2200
Dec 25, 2007 | Canon imageRUNNER 3300 All-In-One Laser...
44 people viewed this question
Usually answered in minutes!