Question about Polaroid FLM-3732 Television

1 Answer

Power to the tv just stopd and it is not the cored the red light to sho the power is on is not on

My tv was working fine then the power to the tv just stopd I thout it was th power cored But thats not the problem the red light to the tv ust to be on but now nothing

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 192 Answers

The following link posted by stiv0 gives detailed instructions on how to replace the two capacitors that commonly go bad on this TV. When these capacitors go bad they prevent the TV from turning on. However, you still get a red light when you plug it in. Since your not getting a red light I'm not sure this fix will work for you. I'd open up the TV and see if the capacitors are bulged out as described in stiv0 post. If they are I'd go ahead and replace them and give the TV another try. This fix is fairly easy to do and very inexpensive so you don’t have much to lose.

http://www.fixya.com/support/r741402-polaroid_flm_373b_lcd_tv_black_screen

Posted on May 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Samsung TV doesn't show a picture, when there was a picture audio and remote not working. Which boards need replaced?


If there is no audio then most likely your main board. If your red power stand by light blinks less than 3 s then its the M/B. If its more than 3 s then its the P/B.

Sep 03, 2015 | Samsung PN50C550 50 in. TV

1 Answer

Tv was working fine. turned it on, the green power light flashes. power it down and the power light is steady red and the lamp light flashed red


you need to replace the lamp This unit has 2 different LAMPS used, one is SQUARE and the other is ROUND.

Dec 18, 2010 | Zenith Z52SZ80 TV

3 Answers

What does the red light mean next to the power button?


The red light next to the power button is usuall the hard drive led which should blink every time the hard drive is in use, there is normally a green or yellow light for the power that shoukld stay on constant when the computer is on.

Feb 09, 2010 | Intel Compaq EVO D500 (RBMDTCPQP42400) PC...

2 Answers

Hi i got an xbox 360 with 3 red lights &


yea...ur gonna have 2 send that in 2 microsof...heres the # 2 call them 1-800-469-9269

Oct 28, 2009 | Microsoft Xbox 360 Console

1 Answer

My toshiba 57h93 worked fine this morning power went out


Ur DM power board is dead,must be replaced.Try this
website for the board.Tv repair World.com.

Oct 20, 2009 | Toshiba 57H93 57" Rear Projection HDTV

1 Answer

My lg rear projection tv stopd working at onece and there is no light in the indicators .its model no is mw-60sz12. can it happn becouse of lamp


1. Unplug the cord & check if there is power at the
outlet.
2. Check for a busted fuse/or tripped off circuit
breaker at the main power panel pf your house.
3. Check for the busted fuse inside the case of your
projection TV. This is just near where your power
cable of your TV is connected.
4. When you are done, plug back your cord to the
power outlet, and put the power on.
This should correct your problem. Send us your email and keep us informed.

Sep 27, 2009 | Televison & Video

1 Answer

Power to the tv just stopd and it is not the cored the red light to sho the power is on is not on


This unit has had a component failure.The unit should be sent or taken in to a service center for testing and service. The Polaroid customer support telephone numbers are 1-866-925-7278 and 1-866-289-5168. Give them the model number of you television and the problem you are having with it. They will be able to help you with your problem.The Polaroid customer support website is: http://www.polaroid.com/CES/support.jsp Give them the same information and they also should be able to direct you to a service center, that will help you with your problem. I hope this information help you with your problem.

May 28, 2009 | Polaroid FLM-3732 Television

1 Answer

52HM95 Lamp Issue


The Tv will shut off and sho error if the ballast is bad. Replace the ballast and you should be fine.

Mar 22, 2009 | Toshiba 52HM95 52" HDTV Projection...

1 Answer

Hotpoint washer/dryer aqaurius stopd mid cycle with message F-01


f01 is a motor short circuit. you will probably need a new one and maybe the circuit board that powers it if all the lights went out unless the fuse is gone.

Jan 28, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

X2gen 19 inch wont turn on.


my Acer Orbicam that takes picters and vidios stopd working just like that and i dident do enithing rong it just stopd working please can someone help me

May 30, 2008 | X2Gen MG19MY 19" LCD Monitor

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...