Question about La Crosse LaCrosse Technology Wireless Weather Station

Open Question

Faint display on WS-8025u

Hard to read lcd display

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Canon fax L250 lcd contrast too light

hello, you can try adjusting the angle of the screen and use the function /menu button to find lcd brightness -- could not find anything in manuel

Aug 13, 2014 | Canon FAX-L250

1 Answer

Why is my display hard to read on my keurig?

If it's an LCD display, then it's probably got water in it.. Only thing you can do apart from buy a new machine, is try to get it fixed. but would probably cost as much as replacing the whole thing

Jun 23, 2014 | Coffee Makers & Espresso Machines

1 Answer

LCD display is too faint

Press and hold mic adjust contrast with vol up down while holding mic

Mar 04, 2014 | Toshiba DKT-2020 Corded Phone

1 Answer


Your breadmaker should be under warranty. If I were you I would call Cuisinart

Dec 05, 2012 | Cuisinart CBK-100 2-lb. Bread Maker with...

1 Answer

My digits are dimming or fading making the watch hard to read. Battery reading is "high"

mcdevito75 Here, The battery could be loose makeing a weak connection or the LCD screen could be going bad, Have a small watch repair shop in your area check it out. If you can do so yourself be very carefull as too much pressure on the battery (PRESSING) could destroy the LCD face of the watch, also if the display (FACE) of your Casio ever goes black, even if display returns, the LCD is going bad.

Feb 05, 2011 | Casio G-Shock GW700A-1V Wrist Watch

1 Answer

Lcd display is what seem to be to bright hard to read black info .or the black symbols are very light hard to read with bright orange lighted display thanks Mark

You don't say what device this is on, HOWEVER most thngs have a "contrast" control that will adjust the visibility.

Sometimes they call this a viewing angle control and sometimes it is a small shaft from the back of a unit, OTHER times it is a setting available through a menu... if you can read the display enough to find it...

Oct 12, 2010 | Music

1 Answer

The LCD display is very light; I can hardly read it. The unit otherwise works well. How can the problem be solved?

dear two ways to reduce the light.
1-press Fn key and then press up and down arrow keys you see something happening.
2-remove the display driver and then install again your setting has been changes.
3-if above method not effect on LCD then your LCD has been damaged.

Apr 10, 2009 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

Display hard to read

My radio was dropped and parts of the display disappeared, but the display did not break. Unless you have some background in radio repair, DO NOT attempt this repair! If you do, it is at your risk, or the risk of damaging your radio! I disassembled the radio and found the display. There are 2 "rubber strips" that fit next to the LCD. I cleaned and reseated the strips and display about 3 times before getting it right. AGAIN, unless you know what you are doing, and can solder on circuit boards with a proper pencil iron, don't even contemplate it! Let someone who can do it.

Jan 27, 2007 | Grundig YB 400PE AM/FM/SW Radio

Not finding what you are looking for?
La Crosse LaCrosse Technology Wireless Weather Station Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top La Crosse Measuring Tools & Sensors Experts

john milligan

Level 3 Expert

514 Answers

Cindy Wells

Level 3 Expert

5124 Answers


Level 3 Expert

76070 Answers

Are you a La Crosse Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides