Question about Dewalt 18v 1/2" Compact Drill/driver Kit Dc759ka

1 Answer

Why does my drill run hot

When I Use my dewalt 18v model#DC759 and I put it under a good load it heats up and a burnt smell comes from the cooling slots..it quit working entirely,but resumed after it had cooled down..it had not been run an excessive ammount of time...thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 68 Answers

Maybe ur drill is not heavy duty type.You need to rewind the motor,but if i were you buy a new one.YOu may use the old one but its good for few minutes after using it.

Posted on May 19, 2009

  • Aldrin May 19, 2009

    Maybe ur drill is not heavy duty type.You need to rewind the motor,but if i were you buy a new one.YOu may use the old one but its good for few minutes after using it.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dewalt 18v xrp clutch slipping and electrical smoke smell in rear


Yes you can. Depending on the model of the tool it may not be the clutch causing your problem though. On some models the transmission is more likely the problem. Brushes create an ozone smell when the motor runs so that could be the smell. Does it run slow or get hot?

Jan 01, 2012 | Dewalt 18 Volt Compact Drill Kit

1 Answer

What other tools will the Dewalt DC9098 18v battery power?


Hi Joe,

Welcome to fixya!

Dewalt says it is compatible with all their 18v tools, except the univolt.

Please place a vote.
Thanks,
Handie Andie

Jun 24, 2011 | Dewalt 18v 18 Volt 1/2" Compact Battery...

1 Answer

I have a dewalt cordless drill, dc759 18v, I need the instruction manual, I lost mine! How do I get one?


Hi there! Here is a link to the support manual - http://servicenet.dewalt.com/Products/Detail?productNumber=DC759KA# Here is the support back for your drill. - http://servicenet.dewalt.com/Products/Detail?productNumber=DC759KA
To get dewalt manuals, go to servicenet.dewalt.com and search for your product there.
Alex

May 30, 2011 | Dewalt DC759kar heavy - duty 1/2" 18v...

1 Answer

How to remove brushes in a dc759 drill?


you cant replace the brushes on this drill it is a sealed motor. go this site the replacement motor is $ 38.77 http://www.ereplacementparts.com/dewalt-dc759ka-type-18v-cordless-drill-parts-c-1009_

Jan 20, 2010 | Dewalt 18v 1/2" Compact Drill/driver Kit...

2 Answers

Dewalt dc759 drill squealling noise coming from


yes,the most coomon defect for poer tools are carbon brushes.But,git attention also to the gears,bushings, and bearings if there are loosen parts.Also you get rid to a debris or any small dirt particles that maybe sunctioned by the fan and has been entered in the body of the drill thats why you can hear an squealling noise..Just open and clean it.

Dec 05, 2009 | Dewalt DC759CA Factory Reconditioned 18V...

1 Answer

My DC759 drill has no bearing clip


http://www.ereplacementparts.com/dewalt-dc759-type-18v-cordless-drill-parts-c-1009_1162_2837.html

Here is the parts diagram. I hate to say it but I always have problems getting the chuck out of the clutch/transmission without breaking something. I havent figured out how to keep the spindle from moving while I try to turn the chuck. Sorry if this doesnt help much.

Nov 26, 2009 | Dewalt 18 Volt Compact Drill Kit

2 Answers

18v dewalt battery gives off burning smell


18v is one of the newer models, correct? And the drill is new? If so there will be some smell as the motor breaks in. The srmsture is varnished as well as the windind for the commutator. The first few times it get s warm/warm from a heavy load, You will smell it. I would say there is nothing wrong at this point.Do not overload the motor and avoid drilling at low speeds. Use the variable trigger at low speed only for starting a hole. If you are driving screws start the screw,then full trigger driving it in. Good Luck, Ned

Nov 06, 2009 | Drills

1 Answer

Having trouble removing keyless chuck from 18V DC759


Inside of chuck you have a screw, remove screw then tighten an big allen wrench into chuck, short side in, then hold drill and hit allen wrench with a hammer quickly, should break chuck free.

Jun 19, 2009 | Dewalt 18 Volt Compact Drill Kit

Not finding what you are looking for?
Dewalt 18v 1/2" Compact Drill/driver Kit Dc759ka Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Drills Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jim Thurston

Level 3 Expert

670 Answers

Are you a Dewalt Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...