Question about Electrolux Epic 6500 Vacuum

1 Answer

What does the question mark light mean?

When it is plugged in and I try to turn it on, it won't turn on, and the red question mark lights up. What does that mean.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

There is no bag in the vacuum, or the bag is not placed in the vacuum correctly.

In the lower corner of the bag holder near the door is a little black switch, this switch must be pushed in for the vacuum to run. This is a safety so you cannot clean without a bag in the machine.

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The red light keeps blinking while I have the charger plugged in, is this normal?


Hi! If the light on the charger is blinking this can mean an issue with your charger adaptor. Check that the charger is still warm. If so, unplug the charger for a few minutes and plug it back in. If the light is still blinking your charger adaptor may need to be replaced. Hope this helps!

Sep 10, 2014 | Hoover S2105 Slider Bagless Stick Vacuum

1 Answer

What do the symbols and dial settings mean on the electrolux diplomat lx


Symbols..Question mark means "Put a bag in me", checkered light means : "Change me, I'm dirty"....pre-lit power light means: "You have Powaaa" to the unit and the thermostat light means the motor is too hot if it comes on, (most likely from a hose clog) and needs to cool down before the motor will run again. The settings on the control valve basically have to do with the auto shutoff when the bag needs changed. The lower the valve is turned, the more full the bag will get until it shuts off. Hope that helps!

Apr 24, 2014 | Electrolux UltraLux 2000 Bagged Canister...

1 Answer

Irobot 530 won't start


have you tried reset, press spot and dock together

Dec 22, 2012 | iRobot Roomba 530 Robotic Vacuum

1 Answer

Vacuum roller won't turn and there's no suctions. Red light Doesn't blink


go to http://www.dyson.com/
get the support and download the model, troubleshooting, video for your trouble.

God bless you

Sep 16, 2012 | Dyson DC28 Animal Bagless Upright Vacuum

1 Answer

The red light by the on and off switch turned on . what does that mean


usually it indicates a low suction issue. Wether the hose is clogged, or either one or all 4 filters need to be changed. Usually the cone and the circular filter above the plastic cone should be replaced.
Good luck,
Mark

Nov 07, 2010 | Filter Queen Majestic Canister Vacuum

2 Answers

Status light is red, why? I have a Roomba Discovery.


Hi.

If the red light is solid, that means that the Roomba is near to full discharge. If the light is flashing red, then the Roomba is completely out of charge.

If the Roomba is fully charged, then there may be a fault.

Here full list of light codes:

Pulsing Amber - Charging
Green - Fully Charged
Amber - Partially Discharged
Red - Almost Fully Discharged
Flashing Red - Fully Discharged"

Here manual

See also
Roomba DISCOVERY MODELS' DIAGNOSTIC TESTS

May 24, 2010 | Vacuums

1 Answer

The red light on my hayden 3600 vacuum won't go off


I have a 6000 and it does the same thing. I simply unplug the unit and plug it back in after cleaning the filter and dumping the cannister. That seems to reset the warning system.

Jul 06, 2009 | Hayden Industries SuperVac 6000 Central...

2 Answers

Lux Legacy - Cannister Model


If it is what I am thinking, that warning light is just telling you that the cord is plugged in. Alot of the Electrolux models had this warning light.

Jan 05, 2008 | Electrolux Lux 5500 Canister Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Mack Baxter

Level 3 Expert

381 Answers

Are you an Electrolux Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...