Question about Sub-Zero 632 / S

2 Answers

Power requirement sub zero 532

What is the power requirement for a sub-zero 532. Model I have is side-by-side, stainless, doors are about 70 inches.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

115 volts on a 15 amp circuit

Posted on May 19, 2009

  • Randy Hough
    Randy Hough May 19, 2009

    This is cut directly from the manual

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 245 Answers

As with all fridges they should be on a 115vac circuit capable of 20 amps only at compressor start up will they ever pull more than 3-4 amps

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I get replacement bulbs for model # 532 side by side refrigerator?


Where do you live? I know a place in Massachussetts that I deal with that carries replacement parts, also one in Connecticut. CLARKE CUSTOMER CARE
Services Sub-Zero and Wolf products

393 FORTUNE BLVD,
MILFORD, MA 01757
Phone: (877) 925-2753
Fax: (508) 458-2274
DONNELLY APPLIANCE SERVICE
Services Sub-Zero and Wolf products

1478 BARNUM AVE,
STRATFORD, CT 06614
Phone: (203) 378-6186
Fax: (203) 375-9465

Dec 26, 2010 | Sub-Zero 690 Side by Side Refrigerator

1 Answer

Sub-zero model 532 side-by-side icing on inside panel


I would get in touch with SUB-Z customer service, they are the only company that still cares about customers
800.222.7820
They will be able to get it fixed

Jun 08, 2010 | Refrigerators

1 Answer

Sub-zero refrigerator not getting cold - model 532


make sure that the compressor filter is clean -- if it hasn't been cleaned recently, can prevent proper operation.

Jun 06, 2010 | Refrigerators

1 Answer

Model 532 freezer will not freeze


Check a Condenser, if it dirty and full of dust and lint - clean it with soft brush vacuum, it's behind the grill with Sub-Zero logo on it. Right hand side usually

Jul 13, 2009 | Sub-Zero 690 Side by Side Refrigerator

1 Answer

Removing Door Panels on Sub Zero 532


Hi, there is a metal strip that runs down the middle of each door the entire lenth. It is held on with two magnets. Once you pull that strip of metal off, you will see five screws that hold the door handle on. Remove thos five screws and the entire handle comes free. Slide out the panel and replace the handle, screws and metal strip ion reverse order. Take your time removing the magnetic metal strip as it is a very soft metal and could possibly bend or kink up on you.

Hope this helps. I'm having some trouble locating any company that makes stainless stell to match the appliances. All of the metal companies say the appliance manufaturers have a propriety type of lock on the appliance metal finishes. I also have the 532 model.

Good Luck

Mar 25, 2009 | Refrigerators

1 Answer

Specific dimensions of a side by side model 532


FINISHED ROUGH OPENING DIMENSIONS: WIDTH = 47 1/2" HEIGHT = 83 3/4"

DIMENSION OF 532: H=84" W=48" D=24" MINIMUM HEIGHT=82 7/8" DOOR SWING=29 1/4"

Mar 24, 2009 | Sub-Zero 690 Side by Side Refrigerator

1 Answer

Sub zero 532


you might have a few problems,, make sure to check the condensor is clean, also make sure the condensor fan motor is going... you might have a bad Condensor fan motor, and Ref Control or a Freon Leak @ the Evaporator... I would call a tech to check it out...

Sep 27, 2008 | Sub-Zero 690 Side by Side Refrigerator

1 Answer

Sub-Zero 532 (About 18 years old)





First do the simple things like cleaning the condensor coils and turning the defrost timer a few times, also check the evaporator motor or just listen to the fan by opening the freezer door. Also check the light switch, make sure it turns the light off every time you close the door.







Jun 26, 2008 | Sub-Zero 632 / S

2 Answers

Sub-zero 532 problem


you have a Freon Leak @ the Evaporator.. Ice ball on back wall.. left side....

Apr 15, 2008 | Sub-Zero 632 / S

Not finding what you are looking for?
Sub-Zero 632 / S Logo

Related Topics:

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sub-Zero Refrigerators Experts

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

ACME Sub Zero...
ACME Sub Zero...

Level 2 Expert

41 Answers

Sal DeAngelo

Level 3 Expert

2341 Answers

Are you a Sub-Zero Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...