Question about Home

Open Question

Skyscan com model 88905

The outdoor temperature will not display. I ordered a new transmitter, but the problem was not solved. Suggestions?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: outside temperature won't work

Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Posted on Dec 19, 2008

  • 3 Answers

SOURCE: outside temperture

Try changing the batteries in the CLOCK. I had the same problem in a 3M similar clock and it didn't read the transmitter correctly or eventually, at all, when the CLOCK batteries were getting low.

Posted on Jan 15, 2009

  • 1 Answer

SOURCE: No visible outside temp. on SkyScan

Read some other posts on the net and they said to put in new batteries.........bingo!  That did it!

Posted on Aug 25, 2009

  • 1 Answer

SOURCE: my clock is nort showing up the outside tempertute

Seems to be a consistent problem with Skyscan. I have the 88800 model and my outdoor transmitter isn't transmitting the temperature either. We've replaced the batteries in both the transmitter and clock and nothing for outdoor temp. It's only been used for 9 months.

Posted on Nov 23, 2009

  • 5603 Answers

SOURCE: The clock stopped showing the outside temperature.

OFTEN you must re-sync the receiver with the transmitter in these units. Refer to the manual for startup sequence.

Posted on Apr 26, 2010

Testimonial: "This is helpful, thanks."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can we order an outdoor trans-mitter for a model 88902?


Here is a web page that says you can buy the transmitters for $13.95 using a PayPal account.
http://skyscanatomicclocks.com/site/shop/

Mar 11, 2015 | SkyScan Atomic Clock with Outdoor...

1 Answer

My clock is nort showing up the outside tempertute


Seems to be a consistent problem with Skyscan. I have the 88800 model and my outdoor transmitter isn't transmitting the temperature either. We've replaced the batteries in both the transmitter and clock and nothing for outdoor temp. It's only been used for 9 months.

Nov 16, 2009 | SkyScan 86709 Atomic Wall Clock

2 Answers

I have a skyscan atomic clock, model 88900. I've absoltely LOVED it until the outside temperature quit being displayed. I have changed the batteries 2x's according to the instructions and have used NEW...


This is a very common problem that is most frequently caused by the outdoor transmitter going bad. They are surprisingly delicate and don't like getting wet.

You can order replacement transmitters from http://skyscan.info/content/

They only cost $11 and that includes shipping and handling.

Jan 25, 2009 | Audio Players & Recorders

1 Answer

Outside temperature won't work


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Nov 27, 2008 | SkyScan 86709 Atomic Wall Clock

1 Answer

Outside temperture


Try changing the batteries in the CLOCK. I had the same problem in a 3M similar clock and it didn't read the transmitter correctly or eventually, at all, when the CLOCK batteries were getting low.

Nov 19, 2008 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

Changed batteries


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Sep 07, 2008 | SkyScan 86709 Atomic Wall Clock

1 Answer

OUTDOOR TEMPERATURE


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Sep 03, 2008 | SkyScan 86709 Atomic Wall Clock

2 Answers

3M Precision Digital Atomic Wall / Desk Clock with Indoor & Outdoor Temperature and Alarm will not display outdoor temp, i have replaced batteries, outdoor sensor is transmitting, does not appear to...


After replacing the transmitter batteries several times, I tried replacing the clock batteries. They must have been getting low. Once I put in new batteries in the clock it worked fine. Good Luck.

Aug 30, 2008 | SkyScan 86742 Digital Atomic Wall Clock

8 Answers

Temperature Transmitter


You need new SioScan Temperature Transmitter 433 MHz. Take a look on amazon La Crosse Technology TX6U Wireless Temperature Sensor for 433 MHz units.... Hope this was helpful. cheers
temperature-transmitter-uh3jsoynacgcqh0wcsujgpyu-3-0.jpg

Oct 16, 2007 | SkyScan 86709 Atomic Wall Clock

Not finding what you are looking for?
Home Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Experts

Donni Steen

Level 3 Expert

659 Answers

Tom Chichester

Level 3 Expert

34255 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...