Question about Sony SPP-S2730S Phone

1 Answer

Problem with my handset identifying base phone

I have the quadrastation 2.4. The base phone works fine. However the additional handset will not get a dial tone. I have tried disconnecting the handset and reconnecting it and playing with some of the buttons but nothing seems to work. I will hit "talk" or something else, and there will be a pause, and then 5 beeps and it says it cannot connect. How can I solve this? thank you.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers

I can help you register the handset if it is functional. I am a former Sony Tech.

Hand lotion gets on the keypad and into the back of the rubber keypad. There is a conductive carbon on the back of the keypad to short the circuit board when you press the key. Oil makes it stop working.

Parts are no longer avaliable but you can glue a small piece of alumimum foil on the rubber.

For Register Handset Error email me I will walk you through the steps.

digitalwoodshop@aol.com

AL

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do the phones say searching


Because they can't find the signal from the base. Unplug the main base, set the handset in the base and plug it back in. Also, make sure that the telephone line in is plugged in secure

Aug 19, 2014 | Uniden Cordless Phone

2 Answers

I bought 2 sets of the uniden DECT 1480-3. I want 6 handsets to work with one base. How do I add 3 handsets to a base that already has 3 handsets?


Jill,
The only logical way is to get the additional handsets to communicate with the base. And to do that you must set them to the frequency of the base. You Use guide will tell you how to set the frequency n the handsets to talk to the base. They way you set the original ones.
BUT, I doubt if this will work. Why? Because if that was the case if you and I had the same company phones, then I would stand outside your home and set the same frequency on my handset and misuse your phone. A great security risk in today's world. But there is no harm trying it out. Just set the same frequency on the additional ones as the base. If it works, then you will have that many more intercoms too. And do let me know if it works.

Apr 11, 2011 | Uniden Additional Handsets - DCT640 Phone

1 Answer

Sync a new handset to kx-tg5632 phone


This works on MY panasonic; May work on yours too!

Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {0}{0}{1}
2 Base unit:
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
3 Handset:
Press {OK}, then wait until a beep
sounds.
4 {OFF}
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.

Dec 29, 2008 | Panasonic KX-TG5632 Phone

1 Answer

Programming old handsets to a new base


Cancel the old handsets registration at the previous base unit if desired.
For additional handsets, you must register each of them at the new base unit. Only one handset can be registered at a time. A handset will be assigned anextension number at registration.


Make sure the base unit and the other handsets are not being used. Program the same way as the extra handset you bought.

Registration must be completed within 1 minute.

Jun 25, 2008 | Panasonic KX-TG2740 Cordless Phone

1 Answer

GE MODEL 28112 DECT 6.0 CORDLESS PHONE


I contacted GE today and they told me how to get the caller ID to work on the additional handsets. You must follow these steps in the exact order given.

#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes.

reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in. It takes about another 10 minutes after that before all phones start recognizing caller ID but it now works fine.

Mar 26, 2008 | GE 28112 Trio Cordless Phone

1 Answer

Base set fine - additional handsets dont work


The additional handset and the base need to "pair" first. Put the handset in the base cradle till you see the red light blinking. That's when they are paired.

Nov 07, 2007 | GE 25951EE2 Phone

7 Answers

Uniden handset TCX905 with base unit TRU8866-if compatible?


I just successfully registered 4 TCX905s with my TRU8865 base - it's documented in the TCX905 manual.

Be sure the handset you want to register is fully charged.

Remove the handset you want to register from its charger.

Now unplug the AC for the main base, hold down the 'find handset' key on the base and plug the AC in again, when it beeps, you can let go of that button.

Hold down the '#' on the handset you want to register, it will show 'Registering Handset...' and when it beeps, it's done - registered, you're good to go :)

Oct 11, 2007 | Uniden TCX905 Cordless Expansion Handset

1 Answer

Main handset won't work; additional handsets do.


Check that you have the larger power adaptor connected to the base unit.

May 16, 2007 | Doro 530 Twin Cordless Phone

3 Answers

Doesn't anyone have an answer or some help? Please!!!!


Uniden TRU8885-2 Cordless Phone > User Guide E X P A N D I N G Y O U R P H O N E w w w . u n i d e n . c o m Register the Handset to the Base If you purchase an extra handset, you need to register the handset to the base before use. Only one handset can be registered at a time. The handset ID for the supplied handset(s) was assigned at the factory, which has #1 or #2 in the display (#2 for models that have two handsets in packaging). When you register additional handset to the base, the handset ID will be assigned. 1) Before registering the extra handset, the battery pack must be charged for 15-20 hours. 2) Place the extra handset in the main base unit to begin registration. 3) While the handset is registering, Handset Registering will appear in the LCD. When Registration Complete is displayed, the handset has been registered to the base. If Registration Failed appears, please try these steps again. Extra Handset Extra Handset Charger Charger Main Base Extra Handset + Main Base Charge the handset for 15-20 hours. Place the extra handset in the main base to register. 1 2 3 4 ?An extra handset can be registered when the main base is in standby mode. ?Standby Mode - The handset is not in use and talk/flash has not been pressed.

Jun 26, 2006 | Uniden TRU8885-2 Cordless Phone

Not finding what you are looking for?
Sony SPP-S2730S Phone Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Sony Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...