Question about Televison & Video

1 Answer

Plasma TV turns on and off after some time

I have a Pioneer PDP-4214 Plasma. The TV turns off after a period of time. Sometimes it turns off then back on, sometimes with a white screen. After letting it cool it will come back on but then again after 20 minutes or so it starts turning off, etc. I bought the service guide and did basic diagnostics. Switched out the power supply board - same problem. The internal fan is working fine according to the diagnostics sceen, I can see the termperature, but was not sure what an acceptable internal temperature limit was. Any other suggestions would be appreciated.

Posted by on

  • imscomp3 May 11, 2010

    Does anyone have a real answer to this problem as i have the same issue with my Maxent Plasma screen TV. Thanks Rod

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Get a sledge hammer and hit the damn thing

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I buy IR Sensor for Pioneer plasma TV PDP-4214. I don't have part number and I live in Alhambra, outside of Los Angeles.


You will only be able to buy the entire board from Pioneer in Long Beach, if it's still available. If not, I may be able to repair the board to the component level. If you need a repair, please contact me through my website at audioserviceclinic.com. I used to work for Pioneer,

Mar 18, 2013 | Pioneer Pdp-4214hd Tv Main Analog Board...

1 Answer

Pioneer pdp-4271 plasma will not turn on, tried unplugging it and letting it set and plugged back in not turning on, i have checked the outlet for power and it is good also checked end of plug that...


The tv have a power supply board problems.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Oct 19, 2010 | Pioneer PDP-4271HD 42 in. Plasma...

1 Answer

Pioneer PDP-42A3HD - TV turns itself off...is


Here is the link for the manual - c ould be a remote set up issue or this could be puffed caps in the power supply - have a qualified tech check that out

http://tv.manualsonline.com/search.html?q=PDP-42A3HD&submit.x=49&submit.y=15

Jul 03, 2010 | Pioneer PDP-42A3HD 42 in. Plasma...

3 Answers

Tv won't come on...light in corner just blinks red


OK Its your power supply and it can be fixd for free due to a recall.
PLEASE READ BELOW what I found out.
Here's the whole notice:

Important: Free Power Supply Replacement for Certain Pioneer Plasmas

Pioneer is continuing to offer a free, in-home power supply replacement for certain of its second and third generation plasma models listed below for consumers who experience a problem with the original power supply. If a consumer model is not listed below, no power supply replacement is needed and no further action needs to be taken.

If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded in your home at no charge.

Consumer Plasma Models (12 listed):

PDP-505HD
PDP-503PU
PDP-5030HD
PDP-5031HD
PDP-433PU
PDP-4300
PDP-4310
PDP-4330HD
PRO-800HD
PRO-800HDI
PRO-1000HD
PRO-1000HDI
The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

We apologize for any inconvenience, and we thank you for your cooperation.

Apr 02, 2010 | Pioneer PureVision Pro-800HD 43 in. Plasma...

1 Answer

Pioneer Plasma TV-PDP-4270HD won't turn on. TV


Try this! There should be a power button on the bottom of the panel that has to be depressed for the television to power on. It is the main power supply button and without it there is no power going into the TV.

Mar 16, 2010 | Pioneer PDP-4270HD 42 in. Plasma...

2 Answers

Loud pop and tv went off...


Here is a solution from the Pioneer web site:

http://www.pioneerelectronics.com/PUSA/Support/Important%3A+Updated+Information+Regarding+Free+Power+Supply+Replacement+for+Certain+Pioneer+Plasmas
Important: Updated Information Regarding Free Power Supply Replacement for Certain Pioneer Plasmas Pioneer is continuing to offer a free, in-home/office power supply replacement for certain of its second and third generation plasma models listed below for customers who experience a problem with the original power supply. If a model is not listed below, no power supply replacement is needed and no further action needs to be taken.
If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded at your residence or office at no charge.
Plasma Models (15 listed):
  • PDP-505HD
  • PDP-503PU
  • PDP-5030HD
  • PDP-5031HD
  • PDP-433PU
  • PDP-4300
  • PDP-4310
  • PDP-4330HD
  • PRO-800HD
  • PRO-800HDI
  • PRO-1000HD
  • PRO-1000HDI
  • PDP-433CMX
  • PDP-502MX
  • PDP-503CMX
The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

Anyone with questions can call Pioneer's toll free hotline at 800-421-1404.
We apologize for any inconvenience.

Aug 09, 2008 | Pioneer PureVision Pro-800HD 43 in. Plasma...

3 Answers

PDP-4330HD


This exact same problem happened to me 2 weeks ago on my Pioneer PDP-4330HD, and it did indeed turn out to be the power supply. The good news is, you can get it fixed for free, because Pioneer actually recalled the power supply in this plasma and others a couple of years ago.

Here is a link to the announcement on their website concerning the recall. They say that they will do a free in home replacement of your power supply, but when I called the local pioneer repair place, I was told I would have to wait three weeks for an in-home appointment. I ended up taking it in myself, and it was fixed for free 2 days later. Now it works perfectly.

Here's the number to call Pioneer in case the link goes down:

1-800-421-1404

Nov 10, 2005 | Pioneer PureVision PDP-4330HD 43 in....

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74666 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...