Question about Kodak EasyShare C433 Digital Camera

1 Answer

Won't turn on

I turn it on and the screen will come up for a second. Even with fresh batteries in it the low battery signal blinks and the camerea shuts down. Whats wrong with it? Should I just get a new camerea?

Posted by on

  • jesnetusil May 20, 2009

    They were brand new... All 12 different sets I tried.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 423 Answers

How "fresh" are the batteries. Quite often they are weak, right out of the package. We revive a lot of "dead" cameras with Energizer Lithium AA batteries. Many cameras that people are ready to write-off, are resurrected with the Energizer Lithiums. I also think that battery manufacturers are not putting as much "juice" in them as they used to.

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My calculator won't turn on the batteries are fresh plz help


TI calculators have an annoying habit of dimming the screen when the batteries are changed so that it appears as if the calculator isn't turning on. Turn the calculator on (or at least press the ON key). Press and release the 2ND key. Press and hold the Up-arrow key for a few seconds and see whether the screen becomes legible. Does it?

Feb 13, 2013 | Office Equipment & Supplies

1 Answer

Flashing 0% battery and won't turn on


I had the exact problem with the blinking top menu. I found that my memory card had gone bad. one i put in a fresh card the camera operated normally.

Aug 27, 2012 | Canon EOS 60D Digital Camera

1 Answer

The camerea will only stay on for about a second even after being recharged or replacing the rechargable batteries. This happens in any mode.


Try a fresh set of alkaline batteries to make sure your rechargeable batteries are not the problem. If it is still an issue sounds like it is time for an upgrade to a new camera.

Jul 18, 2011 | HP Photosmart M537 Digital Camera

1 Answer

It won't turn on and even if i plug it into the computer or a ciagrette lighter nothing happens. it was working perfectly fine when i was using it and now i have absolutely nothing. it kept saying low...


Have you tried pressing and holding the power button for about 8 to 10 seconds? It should go on then off. Then wait a few seconds the turn it on normally. This usually resets the unit.
If this does not work try a hard reset.
Press and hold (and continue to hold) the bottom-right corner of the screen while powering the unit on.

Continue to hold the screen until the "Do you want to erase all user data?" prompt appears.

Press "yes" and the unit will reboot. This resets all your location settings and user preferences.

If possible after the hard reset, let the unit sit outdoors in the open for about 30 minutes or so to let the unit re-acquire the satellite data.

Once it gets going update your gps at the Garmin site.
Thanks for using FixYa
Here is a link to the owners manual if needed.

http://www8.garmin.com/manuals/3130_OwnersManual.pdf

Jun 30, 2011 | Garmin nuvi 1450 GPS Receiver

1 Answer

Even with new batteries, the camera turns off after a few seconds


Be sure you have real fresh Alkaline batteries or fresh recharched NiMh batteries.
The best rechargeable batteries are the ENELOOP (from Sanyo), these have a very, very low discharge, so after a week the camera still works without the problem of turning off after a few seconds.

Jan 25, 2010 | Konica Minolta DiMAGE S414 Digital Camera

1 Answer

97 Legacy Left key on. battery dead. charge battery and all four turn signal light blink, 4 ways not on. lights blink for while then stop. Engine will not even turn.


try disconnecting battery termainals for five seconds and try again if thats doesnt work check all fuse in car and under hood.

Oct 15, 2009 | 1997 Subaru Legacy

2 Answers

Battery low indicator comes on even after new battery installed


I also have this problem. I put freshly recharged batteries in the DX3900 and the camera starts to turn on and reads the memory card (the green LED blinks) and then I notice that the in CAPTURE mode the lens does not extend out of the body housing. The top display shows a flashing low battery warning and after approx. 15 seconds, the camera shuts off with no function.

I have determined that the camera appears to have changed its low battery sense level as I have verified that the batteries are indeed fully charged by using a volt meter. If I have the camera in a warm environment, and do not have the LCD display on (removes a major power drain) the camera can be made to work for a short while. If I select the LCD to turn on, the extra drain seems to cause the camera's battery monitor to think that the battery voltage is too low and the camera shut down. I have yet to resolve this issue.

Aug 18, 2009 | Kodak EasyShare DX3900 Zoom Digital Camera

1 Answer

Even when I immediately switch power source (AC adapter or External Battery Pack) right after the low-battery icon started to blink, the camera operation is still locked.


In cases where the blinking low-battery icon appears indicating insufficient power, wait approximately 8 seconds until the LCD monitor display and the EVF become blank. Then switch to another power source or replace with fresh batteries.

Sep 15, 2005 | Konica Minolta DiMAGE 7 Digital Camera

Not finding what you are looking for?
Kodak EasyShare C433 Digital Camera Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...