Question about Computers & Internet

1 Answer

Change password wireless

Cant remember password to get into Wi Fi on tablet

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Go to a computer that is hooked to the same network, and run the CMD prompt, type, ipconfig /all a bunch of numbers will come up, one of them will say Default Gateway, that number will be the IP address of your router, 9 out of 10 chance either 192.168.1.1 or 192.168.2.1 or 192.168.1.254, put that IP address in your web browser address bar, not the search bar but address bar and press enter, a login screen should come up, you can look your up depending on make and model, but most default ones are admin and password or something similar, once you log into router, just hit wireless section and you can see existing wireless code

Posted on Dec 30, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 16 Answers

SOURCE: wi-fi problem

go to the website that manufactures the card and then install the vista driver you will need to ensure that the device is removed in control panel first otherwise vista will duplicate the device.
then go into windows vista network connections and enable the wireless card and request it connects to network.
you will need to allow it access at the firewall or it will not connect

Posted on Dec 09, 2007

rahul26485
  • 611 Answers

SOURCE: need wireless driver

for xp vista or which device you have to need

Posted on Dec 12, 2008

arvinds88
  • 108 Answers

SOURCE: i have a gate way laptop with Intel®

Wi-Fi card can be considered broken only if its not able to scan for any available networks. Also, do check in the device manager of the computer. Check for the device status of this wireless adapter there. If its properly installed, etc., it should say, "This device is working properly". There is also a fix for other error messages. Regarding hardware breakage, we cannot come to a conclusion so easily as we have all these things to check. The case may be little complicated as its an in-built wireless card. We cannot even remove it and try on a different computer.

Posted on Mar 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set password on Wi-Fi orca android tablet


Answer Line: Change your Wi-Fi password on various ...

www.pcworld.com/.../change-your-wi-fi-password-on-various-...

PC WorldFeb 11, 2013 - But Wi-Fi passwords, like every other kind, need to be changed every so often. Here's how to ... Android. You can't simply change the password here; you'll have to delete the network from your phone or tablet and recreate it.Missing: orca

How to Connect Your Android Tablet to a Wi-Fi Network ...

www.dummies.com/.../how-to-connect-your-android-tablet-to-a-wifi-net...
After you've activated the Android tablet's Wi-Fi radio, you can connect to an ... ... Be careful when connecting to a non-password-protected network. It's possible ...Missing: orca

How do i change my wifi password [Solved] - WiFi - Cell Phone ...


Dec 14, 2015 | RCA 8" Android Tablet w/Dual Tuner

1 Answer

How do get wi-fy on my tablet?


It's a good idea to access Wi-Fi whenever possible to avoid data charges. After you've activated the Android tablet's Wi-Fi radio, you can connect to an available wireless network. Obey these steps:
  1. Open the Settings app.
  2. Choose Wi-Fi.On some Samsung tablets, you find the Wi-Fi item on the Connections tab. Choose Wi-Fi to view a list of available Wi-Fi networks on the right side of the screen. Otherwise, the list shows up full screen.
    433273.image0.jpg
  3. Choose a wireless network from the list.When no wireless networks are listed, you're sort of out of luck regarding Wi-Fi access from your current location.
  4. If prompted, type the network password.
    Touch the Show Password check box so that you can see what you're typing; some of those network passwords can be long.
  5. Touch the Connect button.
    The network is connected immediately. If not, try the password again.
When the tablet is connected to a wireless network, you see the Wi-Fi Connected status icon. This icon indicates that the tablet's Wi-Fi is on, connected, and communicating with a Wi-Fi network.
Some wireless networks don't broadcast their names, which adds security but also makes connecting more difficult. In those cases, touch the Add icon. This icon might also be labeled Add Wi-Fi or Manually Connect. To make the connection, type the network name, or SSID, and choose the type of security.
You also need the password, if one is used. You can obtain this information from the girl with the pink hair who sold you coffee or from whoever is in charge of the wireless network at your location.
  • Not every wireless network has a password. Still:
  • Be careful when connecting to a non-password-protected network. It's possible that the Bad Guys can monitor such a network, stealing passwords and other information.
  • Some public networks are open to anyone, but you have to use the web browser app to find a login web page that lets you access the network: Simply browse to any page on the Internet, and the login web page shows up.
  • The Android tablet automatically remembers every Wi-Fi network it has ever been connected to and automatically reconnects upon finding the same network again.
  • To disconnect from a Wi-Fi network, simply turn off Wi-Fi.
  • Use Wi-Fi whenever you plan to remain in one location for a while. Unlike a mobile data network, a Wi-Fi network's broadcast signal has a limited range. If you wander too far away, your tablet loses the signal and is disconnected.

Oct 29, 2014 | Nextbook Premium 8 Se Android

1 Answer

Cant get wi fi signal.


Solution 1.Check wireless connection.
The first step of diagnosis have to any other device connected to the same network, ensure the wireless connection is working fine, or verify the settings of your wireless router to correct it.
2.Check your Keep Wi-Fi on during sleep Settings.
Owing to Wi-Fi sleep policy your Wi-Fi connection may be going to get disconnected every now and then.
Tweak this policy to keep your Wi-Fi connection awake.
[Settings] >>[Wi-Fi]>>[Advanced]>> Check [Always] to keep the Wi-Fi on during sleep.
Save changes and exit all the screens. Your Wi-Fi will never get disconnected again due to this policy.
4b772182-841f-45fa-ad1c-e12de8a85013.jpg
3.Check signal strength of wireless connection.
The performance of a wireless network connection depends in part on signal strength.
You have to connect the Wireless network where the signal strength is strong.
Check Wireless network signal strength icons in notification bar.
7c93e2e3-aae2-488f-aee7-895ff735ad1f.jpg
4.Try to turn off/on Wi-Fi on the device.
First to turn off Wi-Fi, [Settings]>>[Wi-Fi] >>[turn Wi-Fi to off].
And then to turn on Wi-Fi, [Settings]>>[Wi-Fi]>>[turn Wi-Fi to on].
44a9d8ce-3c3a-4462-a13e-511c66dedb72.jpg
5.Try to forget network on the device.
Forgetting wireless networks allow your tablet/phone to reset some settings.
[Settings]>>[Wi-Fi]>>Press & hold your[Net Work Name(SSID)]for 2 seconds.
>>Select[Forget Network]>>Re-Connect your wireless networks if it's disconnected.
c852e0a3-00ae-4c9b-9d2f-aa976fbb4767.jpg
6.Try to reboot your device.
7.Make sure your firmware is up-to-date.
>>Select[Settings]>>[About tablet]>>[System Firmware Update]>>[Check Update].
995ddb02-e8d2-4000-9ebc-d340619923d1.jpg
8.Try to reset your device.
Note: once RESET was performed, all data, apps, settings and personal information will be deleted after initialization.
Third-party programs might be the major probability of Tablet/Phone instable, suggested to have a full reset for the device if the situation persists.
[Settings]>>[Backup&reset]>>[Factory data reset]
e16e9ea2-abf7-49e7-85e4-36d80d0397ba.jpg
9.Try to other wireless connections.
If steps above were not able to solve internet connection problem still, please try other wireless connections if available, otherwise contact your networking provider to technical support.

Oct 09, 2014 | Worryfree Gadgets 7inch Zeepad 7.0 Android...

1 Answer

How reset ipad passcode


  1. Start the iPad
  2. Tap on the Settings app
  3. Tap on the Wi-Fi category
  4. Choose a Network
  5. Once you Tap on a network name, it will try to connect to it. If the network is using wireless encryption, though, you will be presented with a screen asking you to enter the wireless encryption password.


How to connect an iPad to Wireless or Wi Fi network

Aug 12, 2014 | Apple iPad (16 GB) WiFi Tablet PC

1 Answer

Cant acess my wi fi on my kindle fire as it needs my parental password which i cant rember


Not positive but think you will have to unregister the Kindle and then re-register it. You will lose everything.

Mar 09, 2014 | Amazon Kindle Fire HD

1 Answer

Will not connect to wifi


  • Touch the Apps Menu button on the Home screen.
  • Open the Settings app.
  • Choose Wireless & Networks.
  • Choose Wi-Fi Settings.
  • Ensure that Wi-Fi is on.
    When you see a green check mark next to the Wi-Fi option, Wi-Fi is on.
  • Choose a wireless network from the list.
    Available Wi-Fi networks appear at the bottom of the screen. When no wireless networks are listed, you're sort of out of luck regarding wireless access from your current location.
    Optionally, type the network password.
    Touch the Password text box to see the onscreen keyboard.
    Touch the Show Password check box so that you can see what you're typing; some of those network passwords can be long.
    Touch the Connect button.
    You should be immediately connected to the network. If not, try the password again.

  • May 12, 2013 | Samsung Galaxy Tab Tablet PC

    1 Answer

    I cant get my tablet to connect to wifi


    Android tablets, unlike Android phones, don't require mobile phone service or a contract with a mobile phone company, and several models use Wi-Fi for network connectivity. The Android 3.0 operating system, known as Honeycomb, is designed specifically for tablets, and has the same features for Wi-Fi connections that are available with earlier versions of Android. Android tablets support wireless connections encrypted by both WEP and the more-secure WPA.

    Tap the "Apps" menu on the tablet screen. Touch "Settings." Touch "Wireless and Networks" and select "Wi-Fi Settings." Tap the "Wi-Fi" box to turn on Wi-Fi. The Android tablet scans for available Wi-Fi networks and displays them on-screen under "Wi-Fi Networks." Tap an available Wi-Fi network. Touch "Connect" if it is unsecured, or enter the password or passcode for the encrypted connection.
    Tap "Connect."

    Jan 14, 2013 | Polaroid 7 in. Internet Tablet

    1 Answer

    How to turn on wireless connetion


    router has a installer cd..when you install it you will be guided in how to connect your pc to the router..and also in how turning on the wireless connection...
    hint: remember to put a password on your wi-fi so that it cant access easily by other persons..

    Feb 06, 2010 | Toshiba Satellite R10-S802TD Tablet PC

    1 Answer

    Changing Wireless network password without resetting the router


    For that access your router with
    http://192.168.1.1
    or http://192.168.0.1
    if you cant able access it then reset it
    Press RESET button for 10 seconds it is in back sid of router.
    then access above link.
    type user name "admin' and password as "admin' or blank or "password'
    then go to wi fi security first configure your router as WEP then go to wi fi security in advancwed then set WEP key it is your password to connect wi fi .

    Aug 13, 2009 | D-Link 802.11g Wireless Router WBR-1310...

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    55 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Computers & Internet Experts

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    kakima

    Level 3 Expert

    102366 Answers

    David Payne
    David Payne

    Level 3 Expert

    14161 Answers

    Are you a Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...