Question about HP Officejet Pro L7590 All-in-One InkJet Printer

1 Answer

How do i solve printhead problems>

The error message reads "there is a problem with the following printhead(s): black/yellow"

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 91 Answers

Clean the printheads. Follow the steps below to clean the printheads.

  1. Make sure the printer is loaded with unused white paper.
  2. Press Setup on the device control panel and select the Tools menu.
  3. Press 3 on the Tools menu to begin the cleaning process.

Posted on May 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

"there is a problem with the printhead"


Sounds like you need a new one. The best place to buy is amazon (because of reviews and price). take a look Lexmark Printhead cheers
problem-printhead-uh3jsoynacgcqh0wcsujgpyu-3-0.jpg

Oct 06, 2011 | Lexmark Prospect Pro205 Wireless...

1 Answer

I am getting message "the


More black/yellow print head failure we observed in this series, no remidy for this issue replace the print head..

Sep 23, 2011 | HP Officejet Pro L7680 All-In-One Printer

1 Answer

Message on printer screen says "The following printhead(s) has a problem: black/yellow (K/Y).


Hi,

This probably could be defective Printhead ( black/yellow )

Follow the steps below and it should resolve the issue, if not, you need to replace the K/Y Printhead. You can purchase it from any nearest departmental store like bestbuy or costco or walmart etc or Call HP and order one.

Open the front access door. ( printer must be power on )
Remove the Latch of the Printheads
Remove the Printhead
Clean the Contacts with lint free cloth ( golden contacts or electrical contacts / not the nozzles )
Re-install the Printhead back in its position and close the front access door.
The printer usually goes thru initialization process. or Turn off the printer and turn on.
If you still get the error message, Replace the K/Y Printhead.

Regards,
Ron



// Rate this solution with 4 Thumbs to help us improve the support

Jul 02, 2011 | HP Officejet Pro L7580 All-In-One InkJet...

1 Answer

I have three HP L7780 printers that have bad print heads black/yellow. replaced but same problem. ?????


take out printheads. unplugg power cable from back press adn hold down 6 and # buttons on pritner at same time while holding them down plugg it back in. then insert printheads one by one. first insert black/yellow shutt the door adn check for message on pritner screen. if it says printhead missing cyan/megenta it means it detected black/yellow printhead. do same with cyan/megenta adn check for message on screen. if you see no error mesage and both printheads were detected fine let the printheads alligned completely. then if u see same issue it is the pritner whgich need to be replaced.

Dec 15, 2009 | HP Officejet Pro L7780 All-In-One InkJet...

2 Answers

My HP officejet Pro L7580 says the printhead has a problem


Re-insert the print cartridges. It is also possible that the heads are burnt. Get a new set of print heads (black/yellow) and install to the printer. If problem persists, clean the contacts on the printers. Use acetone + cotton swabs.

Mar 16, 2009 | HP Officejet Pro L7580 All-In-One InkJet...

2 Answers

The following printhead(s) has a problem Black/Yellow[K/Y].


Simple solution is:

Replace the Black and Yellow Print Catridges. The print heads are mounted to the bottom of the catridges and these, depending on whther they're from HP or not. can have a hard time conducting electricity properly, and in turn.. spitting ink out properly.


Also happens often with aftermarket Catridges because HP puts chips on the catridge. be sure to put an HP catridge. Sometimes you get what you pay for :)

Oct 31, 2008 | HP Officejet Pro L7580 All-In-One InkJet...

2 Answers

The following printheads has a problem


Resetting the All-in-One
  • Press the On (fa37665.gif) button to turn off the unit.
  • Disconnect the power cord from the back of the unit.
  • Connect the power cord to the back of the unit.
  • Press the On (a477fdf.gif) button to turn on the unit.

Jul 25, 2008 | HP Officejet Pro L7680 All-In-One Printer

Not finding what you are looking for?
HP Officejet Pro L7590 All-in-One InkJet Printer Logo

1,001 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...