Question about Portable Televisions

1 Answer

Tv.does not wanna switch on

I was watching tv still last night before going to church,when i came back and wanna switch it on it did not wanna go on.i opened it and checked the fuse but it was fine,can u ps help me cause im alone .

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: tv.does not wanna switch on - Portable Televisions

Can you tell me where the fuse is at.

Posted on Jul 27, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why wont my casio tv 600 pick up eney channels


Aug 18, 2012 | Casio Portable Hand Held Tv - Model...

1 Answer


If the T.V. itself got wet you need to remove back panel to insure it dry completely. If there is anything that looks as though it is burnt on it then do not try plugging in because it will only do more damage. if everything looks to be normal and there is nothing looking as though it is burnt or dicolored then you need to take it to a repair shop or figure out what is burnt or discolored and find that part and replace it yourself. If it is the Antenna then you will problably be better of replacing it because tv antenna are designed to have direct lines meaning once a line has been cut or burnt or damaged it cannot be fixed and would be cheaper to replace the entire wire.

Jul 03, 2012 | Protech Portable Televisions

1 Answer

Hi i have an alba tv , im trying to connect a dvd player. I have connected the scart leads etc.I can not get onto the av channel so i can watch a dvd. Please help


Firstly, please make sure you have connected the SCART cable correctly. This should be connected to a SCART OUT socket on the DVD player to one of the SCART IN or EXT sockets on the rear of the TV.

If you have correctly connected the SCART cable the TV should automatically switch to the AV channel when you switch the DVD player power on or insert a disc.

Switch your TV on, then switch the DVD player off and then on again. If the TV does not change to the AV channel you may have the SCART cable connected incorrectly.

Not all TVs automatically switch to the AV channel when the AV device is switched on. On some TVs the AV input is on channel 0 or 99. On other TVs the AV input is not assigned to a specific channel. On these TVs you need to look for a button marked "AV", "INPUT" or "SOURCE" - either on the TV remote or on the buttons on the front of the TV. The easiest way to do this is to insert a disk into the DVD player and start it playing. Then press the "AV" "INPUT" or "SOURCE" button (whichever one you have) repeatedly until you find the signal from the DVD player.

Please check your connections and try using the "AV" "INPUT" or "SOURCE" buttons. If you are still unable to watch your DVD player, please post back with the following information:

1. Model number of the Bush TV
2. Brand and model number of the DVD player
3. If you are using any remote other than the ones supplied with the TV or DVD player, the brand and model number of the remote.

I will then be able to tell you exactly how it should be connected and which buttons (if any) you need to press to access the AV channel.

Hope this helps. Happy New Year!


Jan 01, 2011 | Portable Televisions

1 Answer

No channels on either VHF or UHF settings

The news is not good, my friend.
The USA switched to digital broadcasts of TV signal around February 2009. Before that, all TV stations were transmitting analog signals. This TV has an analog tuner and is not able to receive digital broadcasts.
Unfortunately, this TV does not have any input jacks for coaxial cable, RCA cords, or even a plug for TV input. So you don't have any simple means to hook up to DVD players or videogames, or (most importantly) a digital-to-analog converter box. Basically, this TV has no value in the USA. If you take it to a country that still broadcasts NTSC analog signals over the air, though, you'll be in good shape. But if I'm on vacation in one of those places, the last thing I'm going to do is spend my time watching a teeny tiny television, you know?

Aug 20, 2010 | Citizen DS777 2.2 in. Handheld Television

1 Answer

Tv won't turn on..was fine last night. Tried button on TV . No Go

Power supply board have problems.Replaced the power supply board,will solved this problems.Tries websites like, to buy a refurbish power supply board for the replacement.

May 29, 2010 | Portable Televisions

1 Answer

High audio static on all but one channel of my RCA TV

had this problem for a while only just found the cause, its either your tuner flipped out which means you just neded to retune the tv and it should be fixed if not that there was this setting i found still not sure what it is or means but you could select these letters i think there was S, BG and some other ones but i changed it to the top one which was BG and it fixed the static sound with the clear picture problem just stuff around with the channel settings and see if you have that setting hope that helped

Aug 16, 2009 | RCA Portable Televisions

1 Answer

Toshiba TV -- horizontal line

sounds like you have feild colapse.take off the back and on the ciruit look for the horizontal and when you get it sue a screw driver and a mirror. put the mirror in front of the tv once you locate the horizontal plug the tv back on and look at the mirror and as soon as you turn the horizontal you will see the picture come back up to the correct size, if no good???? take it out and get a new one if you look on the side off the component you must get tthe same for safety, solder the new component in and try again

Apr 20, 2009 | Toshiba Portable Televisions

2 Answers

Tv manual lost

if u want manual it will available in the site which ever company u have brought go totheir appropriate site and verify u will get it for connecting the ear phone it will be there in bottom of ur tv it be visible just connect ur ear phone to that place

Feb 28, 2009 | Portable Televisions

1 Answer

Sony TB model # KV-27S10 won't go back to original settings

Hook the cable tv signal directly from the wall to the tv,

then activate auto-memory. The tv should stop going thru the

channels once it finishes memory procedure.

Oct 22, 2007 | Portable Televisions

Not finding what you are looking for?
Portable Televisions Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Portable Televisions Experts


Level 2 Expert

136 Answers

The Knight
The Knight

Level 3 Expert

66413 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Portable Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides