No sound from DVP-SR760H

Sony DVP-SR760HP region code - VideoHelp

https://www.videohelp.com > dvdhacks > sony-dvp-sr7...

Post Region code hack posted by ravikalyan_143, September 07 2016: 1. Make sure the DVD player has no disc in it and is powered off 2. Press 12345 on the ...

Sony DVD Player DVP-SR760HP - Uncoding of Region ...

https://forum.videohelp.com > Video > Authoring (DVD)

Dec 10, 2014 - Need help to make my new Sony DVD Player DVP-SR760HP Region Free. My player is suitable for Region 5. I have DVDs of Region 2 since I ... Sony DVP-SR760H Region free unlocking - VideoHelp Forum
Dec. 21, 2014
Need Help to make my Sony DVP-SR310P DVD Player region ...
Mar. 13, 2017
Sony DVP-SR370 DVD-player region code - VideoHelp Forum
Dec. 26, 2014
Region Code free for sony dvp-sr320 - VideoHelp Forum
Feb. 14, 2014
More results from forum.videohelp.com

That is an off brand of tv. The remote may not support it. You can try following the manual and doing a code search to try and find one that works.

No special programming is required. Connect the DVD player to the TV using an HDMI cable. Note which input jack you used on the TV (example: HDMI 1 or HDMI 2, etc.) Turn on the DVD player and insert a DVD disc and play it. Turn on the TV and select the input you used to connect the DVD player (example: HDMI 1 or HDMI 2, etc.). You should now see and hear the DVD disc playing. Most settings are pre-set at the factory so everything will work without adjustment. However, both the DVD player and the TV have a Menu where you can adjust settings for picture, sound, etc. if desired.

Describe your "hook-up" hardware. Make sure you are using "out" socket or HDMI plug-in socket at back of DVD player.

Use a SCART lead from TV to DVD player!

If the devices have HDMI connections you can pass the 5.1 signals via them. If the Speaker has only one HDMI socket you can get a splitter to feed the picture to the TV and sound to the unit.
If it doesn't have an HDMI then you have bought a pig in a poke.

yes, you must have at your tv one of this plugs: Connector Type Sony DVP-NS710H 1 x Composite video output ( RCA phono ) - Rear , 1 x HDMI output ( 19 pin HDMI Type A ) - Rear , 1 x Component video output ( RCA phono x 3 ) - Rear , 1 x Audio line-out ( RCA phono x 2 ) - Rear , 1 x Digital audio output (coaxial) ( RCA phono ) - Rear on your tv the connector is input.

IT SOUND LIKE THERE SHOULD BE AN INPUT BUTTON ON YOUR CABLE OR T.V REMOTE TRY CHANGING THE INPUT. ALSO TRY PLUGGING DIFFERENT AUDIO AND VIDEO CABLES BETWEEN RECORDER AND TV. ALONG WITH YOUR HDMI.

Hello cherylsacket,

Check your cables to your TV. If possible check the various cables to your set. I would suggest using the HDMI cable if your TV has an HDMI input. Remember to power off all devices before connecting your cables. If I may ask which cable are you using to connect between your Tv and the DVD player?

Thank you,

Shuttle83

http://www.electron-age-technologies-llc.com

With the first problem i would check the Scart lead to make sure both ends are pushed all the way in, if the lead is in at an angle that can cause loss of colour or picture, and that none of the pins are bent. Failing that try another Scart lead.
Most DVD players need to have progressive scan enabled in the settings menu, are you using a HDMI lead or Video Composite, (5 phono plugs)? HDMI is the better of the two!