Question about Kyocera Mita FS-1020D Laser Printer

1 Answer

Hey! I have a Kyocera fs-920 and it wont feed any paper through, at least not from the tray. It does from the manual feed tray. When I turn it on it does the warming up thing, the red and green lights flash and then it tries to feed through some paper, cant do it, then just sits there with the red light on under the ! sign. Please help! Hi I have a kyocera Fs-1020D which won't take the paper from the tray but it will take it from the multipurpose feed

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 52 Answers

Most probably the feeder roller needs replacement. How long have you used the printer.

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the MP tray?


It's the small door at the very front of the machine...located directly above the main paper feed tray. Just pull it open and lower it down. MP stands for Multi-Purpose and is for different paper types and sizes that are not available from the main tray.

Oct 12, 2013 | Kyocera Ecosys Fs-1128mfp 30ppm All-in-one...

1 Answer

Sir! the problem of our kyocera mita fs 3800 is this that it gives us message that the paper is jam please open the cassette 1.and remove the paper. we opened the cassette 1 checked the tray but there is...


Try cleaning the paper feed rollers for that cassette. Sometimes the rollers get dirty causing the paper to slip and not feed from the cassette causing the machine to register a paper jam.

The rollers can be cleaned with rubbing alcohol and a cloth.

Apr 04, 2011 | Kyocera Mita FS 3800 Laser Printer

1 Answer

Kyocera FS 4000 DN printer stops printing for no reason.


Try the feed tires in the tray first. More than likely the paper is not being picked up and causing jam message. The separation roller also has a hub on it to prevent a second sheet from feeding. Sometimes these start to lock up ,a little oil on the hub sometimes relieves some of the tension.

Jun 03, 2010 | Kyocera FS- 4000DTN Laser Printer

2 Answers

Kyocera FS-920 RED LIGGHT IS BLINKING AND GREEN LIGHT IS OFF


There are 2 possibility to cause your printer acting like this:
1) Green Off, Red Fast-Flashing = Paper Jam or waiting for jam reset.
2) Green Off, Red Slow-Flashing = Paper Empty or Paper tray is not inserted.

If it is condition 1) then just remove the jam paper then open and close the Top Cover to clear the error.
If it is condition 2) then insert some paper in the paper tray.

YBC (/\)

Jun 05, 2009 | Kyocera FS-920 Laser Printer

1 Answer

Kyocera 3800N Defaulted To MP Tray


paper guide was set at A5, then this allowed menu to change feed tray selection

Apr 29, 2009 | Kyocera Mita FS 3800 Laser Printer

2 Answers

Hi there i have fs kyocera 1000 and when i wont to print the printer tak the paper but the paper get empty and the printer stop .so i open the cover and close the printer resuom printing and the paper get...


clean the paper feed roller with a damp cloth after removing the paper tray, otherwise call a technician since parts may need to be replaced, including the roller in case.

Feb 26, 2009 | Kyocera Mita FS 1000+N Laser Printer

2 Answers

Not printing


There is probably a paper jam in the tray feed path. The other situation is that the tray paper pick up roller has become hardened/polished, or the paper tray paper is greasy. First step, take the paper from the tray, and fan it out, so each sheet is separated from the next. try it with jut a dozen or so sheets, change the paper.

Thoroughly check the paper feed path.

If not working, then check/clean the rollers.

Jan 20, 2008 | Kyocera FS-720 Laser Printer

Not finding what you are looking for?
Kyocera Mita FS-1020D Laser Printer Logo

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Mita Office Equipment & Supplies Experts

Kyocera HP Expert

Level 3 Expert

523 Answers

Henry Gertcher

Level 2 Expert

48 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Kyocera Mita Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...