Question about Lenovo ThinkPad T400 - Intel Centrino 2 Core 2 Duo T9400 2.53GHz Notebook Laptops (276712U)

1 Answer

ThinkVantage doesn't work

When I select ThinkVantage button , I can choise many different options
except " search radio wireless" and if I click on this missing selection, I get the follow error message " impossible to find LPAC4.dll"

Maurizio

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

Well, Reinstall Windows Vista again... Just by "Repairing" Option, and it must full operating!

Posted on Sep 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i turn on my hp windows vista bluetooth raido transmitter


To turn your bluetooth on do the following process.
1.Click Start , type wireless into the search field, and then select HP Wireless Assistant from the list.
c01615746.gif
2. By default, the Status column shows that both of the wireless devices are either on (enabled) or off (disabled). Also, by default, the Action column does not display.
If you want to control one of the wireless devices individually, without affecting the other devices, clickProperties , and then select the Independent controls for installed wireless devices option.
c01615747.gif
If you have removed the HP Wireless Assistant, it can be reinstalled using the Recovery Manager service.
  1. Click Start , type recovery into the search field, and then select Recovery Manger from the list to open HP Recovery Manager.
  2. Select Advanced options .
  3. Select Software program re-installation and then click Next .
  4. When prompted, click Next .
  5. Select HP Wireless Assistant and then click Next .
Follow the on-screen instructions to complete the installation of the HP Wireless Assistant.
You can verify the device is installed & enabled with Windows Mobility Center.
To turn Bluetooth devices on or off, do the following:
  1. Click Start , type mobility into the search field, and then select Windows Mobility Center from the list to open the Windows Mobility Center. Alternately, press the windows key and the letter x key at the same time.c01577398.gif

  2. Use the drop-down menu items in the Integrated Wireless Devices selection to turn the devices on or off.
    I think the above tips are helpful to you.
    Thank you for using fixya.

Oct 05, 2013 | Radio Communications

1 Answer

HP 2530p EliteBook - touchpad stopped working. Scrolling works except touch scrolling on right side of pad) and right button, but that's all. Wireless mouse works fine.


To access Mouse Properties, select Start - Control Panel - Hardware and Sound -Mouse.

Use Mouse Properties in Windows to customize settings for pointing devices, such as button configuration, click speed, and pointer options.

Jan 18, 2013 | HP EliteBook 2530p Notebook

3 Answers

How do I switch on my SONY VIAO Laptop to accept wireless internet, which I know is working fine


Depending on the model you own, most Sony Viao laptops have a small slide switch along the front edge.

May 27, 2011 | Computers & Internet

4 Answers

How do i connect my nintendo wii to my wireless home network


From the wii home menu...
1.jpg

Go to Wii Options in the lower left.
2.jpg

Click on Wii Settings to the right.
3.jpg

From this first list, click the right arrow.
4.jpg

Now on page 2, click on Internet.
5.jpg

Then click Connection Settings.
6.jpg

From this list, click Connection 1.
7.jpg

Then, click Wireless Connection...
8.jpg

and then click Search for an Access Point.
9.jpg

It will briefly search for any access points and when this screen comes up, click OK.
10.jpg

The following will be a list of nearby access points. If the one you are looking for doesn't show up, click Try again. Then, click the one you have access to...
11.jpg

When the following screen appears, click OK...
12.jpg

and OK again.
13.jpg

It will test the connection...
14.jpg

And if successful, the following will drop down. Click Yes to update Wii.
15.jpg

Sometimes the above screen is false, saying there is an update when there isn't and the following will appear...
16.jpg

Now, back in Wii System Settings, click on WiiConnect24.
17.jpg

From the following list click WiiConnect24.
18.jpg

Click On and then Confirm to save your settings. This feature allows for updates to be seemlessly sent to your Wii so you don't have to do the final step every time.
19.jpg

Ok, the final step, just as a way to make sure your Wii is up to date. Click the right arrow from the 2nd page of Wii System Settings.
20.jpg

Click Wii System Update...
21.jpg

click yes...
22.jpg

it will test your connection for a few seconds...
23.jpg

an update screen may quickly come up and tell you there is an update (whether or not your Wii actually needs one)
24.jpg

and the following screen will appear. Click Wii Menu to finish.

Feb 28, 2011 | Nintendo Wii Console

1 Answer

Can't get my Sylvania 7" netbook to connect to internet using my Linskys WiFi. think I may not have correct IP Address or Server names.


If you think you may have an incorrect ip address, that probably means you changed it by setting a static address. Most systems (with the exception of business systems using domains), use auto ip addressing. Logging on to most wifi hotspots and most home wireless routers requires auto ip addressing. To set yours to auto (this is with XP, I think Vista and Windows 7 is similiar, you just find the controls in slightly different places) go to Control Panel, then to network connections, then right click on the 1394 connection and select properties. In the new pop-up box, if it is not already selected, select tcp/ip and then click properties. (You can also double click the tcp/ip item). In the new pop-up box, make sure both "obtain ip address automatically" and "obtain dns server automatically" are both selected by using the radio buttons. Click Ok on both pop-up boxes to close. While you're in the area, the control panel should still be open. Double click "internet options." Then click on the connections tab, and towards the bottom, click on the lan button. On the new pop-up box, uncheck automatically detect settings. This usually makes you wired connection faster.

Sep 10, 2010 | Computers & Internet

1 Answer

Where is the "wireless switch" on IBM 2645


If you have ThinkVantage Access Connections running (icon in the system tray), click on it and select Power On Wireless Radio. Another way is to press the blue Fn key and the F5 key. (The F5 key should show a computer with wireless lines coming out of it.)

Apr 29, 2010 | IBM ThinkPad T42 Notebook

1 Answer

I want to get a password in my dap-1150


when you say you want to get a password in your WAP I assume you want to enable security: there are 3 different ways to do it:

Enable WEP
(this is the most basic one and should be sufficient if you don't have a known hacker around your neighborhood and if you don't do transmit any critical information from your computer, ex. large and critical bank transactions.)

Step 1 Log into the web-basedconfiguration by opening up a web browser and typing in the IP addressof the access point (192.168.0.50).

Step 2 The default username is admin (all lower case) and the password is blank (nothing). Click OK.

Step 3 Click on the Home tab and then click Wireless on the left side.

Step 4 Click the Enabled radio button next to WEP.

Step 5 Next to WEP Encryption, select the level of encryption (64 or 128 bit).

Step 6 Next to Key Type, select HEX or ASCII. You will need to use the same key on all your wireless devices.

HEX - use 0-9 and A-F only.
ASCII - All numbers and letters.

Step 7 You can enter up to 4 different keys. Select the key you want to use by clicking on the corresponding radio button.

Step 8Enter your encryption key. You make this up yourself. If you selectedHEX, then enter a key made up of a combination of numbers (0-9) andletters (A-F). For example - A4572BCC19 (HEX).

Step 9 Click Apply to save settings.

Note:If you are configuring your access point from a wireless adapter, youwill lose connectivity as soon as you click Apply. You must enable WEPon your adapter and enter the same exact key as you entered on youraccess point.

Enable WPA-PSK (Passphrase) (this one is better than wep, this is the one currently suggested, it's not uncrackable but it's certainly harder than wep)
It is recommended to configure WPA-PSK on your wireless access point before your wireless network adapters.

Step 1Log into the web configuration of the DWL-G700AP by opening up a webbrowser and typing in the IP address of the Access Point(192.168.0.50).

Step 2 The default username is admin (all lower case) and the password is blank (nothing). Click OK.

Step 3 Click on the Home tab and then click Wireless on the left hand side.

Step 4 Next to Authentication select WPA-PSK using the radio buttons.

Step 5Enter a Passphrase. The passphrase or key is an alpha-numeric passwordbetween 8 and 63 characters long. It can include symbols (!?*&_)and spaces. Make sure you enter this key exactly the same on all otherwireless clients.

Step 6 Click on the Apply button then click on the Continue button to save your settings.

Make sure you enter the same exact WPA-PSK Passphrase on your wireless clients.

Enable WPA (RADIUS)
It is recommended to configure WPA on your wireless access point before your wireless network adapters.

Step 1Log into the web configuration of the DWL-G700AP by opening up a webbrowser and typing in the IP address of the Access Point(192.168.0.50).

Step 2 The default username is admin (all lower case) and the password is blank (nothing). Click OK.

Step 3 Click on the Home tab and then click Wireless on the left hand side.

Step 4 Next to Authentication select WPA using the radio buttons.

Step 5 Under 802.1X enter the IP Address, Port and Secret Key for RADIUS Server 1. Repeat for RADIUS Server 2 if applicable.

Step 6 Click Apply and then Continue to save the settings.

the following one is to make sure only those who know the name of your router (SSID) can access it. it's not setting up a password but it's another level of security

Disable SSID Broadcast
Step 1 Open your web browsersuch as Internet Explorer and enter the IP address of the DWL-G700AP inthe Address bar and press Enter. The default IP address is192.168.0.50.

Step 2 Enter your username (admin) and your password (leave blank by default). Click OK.

Step 3 Select the Advanced tab and then click Performance on the left side.

Step 4 Next to SSID Broadcast, select the Disabled radio button.

Step 5 Click Apply to save your settings.

the next one, as the one before. it's not a setting a password but to make sure only those network adapters you have or know can access your router, it's another level of security

MAC Address Filtering
Step 1 Open your web browserand type the IP address of the access point in the address bar. Thedefault IP address is 192.168.0.50. At the login, enter your username(admin) and password (default password is blank). Click OK

Step 2 Click the Advanced tab and then click Filters on the left side.

Step 3 In the section MAC Filters, select the radio button for the mode you would like to use.
Disabled - Disables this feature and will allow all wireless clients to connect.

Allow - Blocks all clients except for what you enter in the list.

Deny - Allows all clients except for what you enter in the list.

Step 4 Enter the Ethernet MAC address that you wish to Allow or Deny.

Step 5 Click Apply and then click Continue to save your settings.

Nov 17, 2009 | D-Link AirPlus G DWL-G710 Wireless Range...

1 Answer

Cant view or call from address book!


i experiencd this with my Nokia 3230 mobile phone..
u better try to turn off ur phone and remove the battery for about 2-3 minutes and get back in..
on ur phone and try accesing the phonebook and make a call via it..
see the difference..
try ya..


Dec 01, 2008 | Cell Phones

1 Answer

Wireless Keyboard not connecting


Check driver for it
  1. right click on my computer
  2. click on properties
  3. click on hardware
  4. click on device manager
  5. click on mic & other pointing device
  6. click on(+)
  7. then right click mouse
  8. click on update driver
  9. select second option in window(advanced)
  10. then click on( search removable.......)
  11. then insert driver cd in cd rom
  12. And click on Next option
If you have done this then do this
  1. if it is not work then do above procss and select third option(Don't search.I will...............)
  2. And click Next option
  3. click Next option in next window.Thats it
Hope this solution works

Jan 07, 2008 | Gateway 2520915 Keyboard

1 Answer

How do I setup filters on my wireless router?


IP Filters IP filters block access to ports or a series of ports from an IP address on the LAN. For example, if you did not want the computer with IP address 192.168.0.100 to access the Internet, then you would block that IP address from accessing port 80. Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK. Step 3 Click the Advanced tab and then click Filters to the left. Step 4 Select IP Filters using the radio buttons. Step 5 Select the Enabled radio button. Step 6 In the first field next to IP enter the IP address you want to block access from. If you want this to apply to a range of IP addresses, then enter the ending IP address in the second field. Step 7 In the first field next to Port enter the port you want to block. To block a range of ports, enter the ending port number in the second field. Then select the protocol type (TCP, UDP, or Both) using the drop-down list next to Protocol Type. Step 8 Next to schedule select Always using the radio buttons to continuously enable this filter, or select the From radio button to set a schedule using the time and day drop-down boxes below. Step 9 Click Apply and then click Continue to save the new settings. URL Blocking URL Blocking is used to block web sites that contain certain keywords. Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK. Step 3 Click the Advanced tab and then click Filters to the left. Step 4 Select URL Blocking using the radio buttons. Step 5 Select Enabled using the radio buttons. Step 6 In the text box below enter a keyword to block. To delete a keyword, select it from the box below the text box, and click Delete. Step 7 Click Apply to add the keyword to the list. MAC Filters MAC Filters allow you to allow or deny access to the LAN by specifying MAC addresses. Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin (all lower case) and the (default password is blank (nothing). Click OK. Step 3 Click the Advanced tab and then click Filters to the left. Step 4 Select MAC Filters using the radio buttons. Step 5 In the section MAC Filters, select the radio button for the mode you would like to use. Disabled - Disables this feature and will allow all wireless clients to connect. Allow - Blocks all clients except for what you enter in the list. Deny - Allows all clients except for what you enter in the list. Step 6 Enter the name used to identify the entry next to Name. Step 7 Enter the Ethernet MAC address that you wish to Allow or Deny next to MAC Address. Step 8 Click Apply and then click Continue to save the new settings. Domain Blocking Domain blocking lets you allow or deny access to certain websites. Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK. Step 3 Click the Advanced tab and then click Filters to the left. Step 4 Select Domain Blocking using the radio buttons. Step 5 In the section Domain Blocking, select the radio button for the mode that you would like to use. Disabled - Disable this feature and will allow all clients on the LAN to access any website. Allow - Permits access to all websites except domains specified in the Blocked Domains section. Deny - Allows access only to domain specified in the Permitted Domains section. Step 6 In the Permitted Domains section, enter a domain to permit. In the Blocked Domains section, enter a domain to block. - or To delete a keyword, select it and click the Delete button. Step 7 Click Apply to add the domain the list.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

Not finding what you are looking for?
Lenovo ThinkPad T400 - Intel Centrino 2 Core 2 Duo T9400 2.53GHz Notebook Laptops (276712U) Logo

578 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lenovo Computers & Internet Experts

Michael Vincent Cruz

Level 3 Expert

868 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

rey francis basa
rey francis basa

Level 3 Expert

666 Answers

Are you a Lenovo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...