Question about LG 47LC7DF 47 in. LCD HDTV

Open Question

47lg5000 usb port is not recognised - LG 47LC7DF 47 in. LCD HDTV

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't scanner recognise usb connection


What type of device are you trying to connect to the scanner? The USB connection might not be working because the scanner can't register the device. It might also be a bad USB port. Have you tried a different device in that same port?

Elisa Jed ' http://www.azvalleygeeks.com

Jun 23, 2014 | Computers & Internet

1 Answer

My mouse wont get recognized


Have you tried to use the mouse in another computer to determine that the mouse if fully working. There are many reasons why it could be non-recognised. Has it ever worked on your system? Is it new and just a faulty mouse. It may be you could just take it back to the shop for a replacement one. Do other devices work in the same USB port. Some times my computer just stops recognising my USB keyboard yet it has been working for months. I found that it seems to be the USB port where the problem is. So not I just switch my mouse and Keyboard usb connectors around and it starts to recognise both again. I can not figure out why it stops. As another device is recognised suggesting the port is not faulty.

Nov 01, 2013 | Computers & Internet

1 Answer

Usb port dont work on car cd player


Need to check your User Manual for USB specifications.

USB port can only recognise certain formats, so you may need to either change your USB device's File System (e.g. convert to FAT32) or convert your files into a format the unit will recognise.

Feb 17, 2013 | Kenwood KDC-X493 Car CD/ MP3 Player

1 Answer

The emachine model KAWE0 is with operating system windows xp sp1 doesnot recognise any usb device.


Good day sir, hi, usually its one or two ports that does not recorgnise a usb device, but if all ports does not recognise the usb device, check the CMOS setup. check this out;
  • one or two ports does not recognise the usb device, this is a local fault, try to check the CMOS setup, this could also be the port itself is the faulty one having loose connection.
  • all ports does not recognise the usb device, this is a system fault, check again the CMOS setup if the USB port is enabled, check the USB device itself also. to make sure use another pc to test the usb device.
A computer virus can also cause the usb port to malfunction, run an anti virus software, if possible you can reinstall the XP and test the USB port afterward.

If all else fails, you can buy a USB card and plug it on the expansion slot on your PC.

Nov 04, 2009 | E-Machines eMachines Desktop PC

1 Answer

LG GSA E 40 L External dvd writer not recognised


you may be having conflicts with usb devices. try temporarily removing all unnecessary devices from the usb ports. unplug and then plug the drive back in. you could try another port. if all ports are in use, then unplug another device, like the mouse and plug in to that port, then plug the mouse into the writers port. i had a similar problem with a wireless usb lan that stopped another device from being recognised. when i removed the lan and replugged the unrecognised device, windows recognised it. i obviously had to use the wireless lan, so i swapped that with the mouse and it worked.

Jul 19, 2009 | LG GSA-E40L Burner

1 Answer

Cannot be recognised on my USB ports


The CD supplied does not have drivers on it. This is a flash player so your PC should recognise it automaticaly.

If this is not happening, please try installing an MTP Porting Kit via the microsoft.com website.

Jul 14, 2009 | Samsung YP-S3JAB Digital Media Player

1 Answer

Sony Vaio USB ports not recognised by XP


It is common problem on most of the PC USB ports does not recognise external hardware.It is mainly due to lack power supplied by the USB Ports..You can try with Old Pentium4 maschines.IT Reads well..

Another thing dont use extension ports to plug external HDD..always use backside on board ports.\

IF it helps rate me

Jun 25, 2009 | Sony VAIO Digital Studio PCV-RX560 PC...

1 Answer

USB 2.0 port not supporting for multi-use


check the driver status of usb ports, or check all the usb port of *********** board sepeartely,

Nov 03, 2008 | Mercury P4VM800M7 Motherboard

1 Answer

Usb port problems.. is it connected to motherboard problems??


you do not need to replace the whole motherboard buy a pcmcia card with usb ports if your laptop supports pcmcia cards

Sep 18, 2007 | Acer Ferrari 1000-5123 Laptop

Not finding what you are looking for?
LG 47LC7DF 47 in. LCD HDTV Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

73698 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...