Question about Navigon 2200T GPS Receiver

1 Answer

GPS takes a long time to receive satellite signal.

GPS takes (Navigon 2200T) takes a very long time to receive signal from satellite after the destination data is stored. GPS works okay in "demo" mode only, but not in "real time" situations. GPS unit is mounted on the dashboard when attempting to receive satellite signal. I live in a residential/commercial neighborhood that have both cell phone relay towers and telephone poles. Would electrical inteferences be my problem... if so what is my solution?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

You probably are just in a bad location where satellites are not reachable. All these units work from the same satellites and recieve them the same so it wouldn't matter what brand you have. I highly doubt that the powerlines and cell towers are effecting the transmission.

Posted on Sep 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Navigon2090Suserguide I need the user guide for a navigon 2090S gps

The Navigon GPS manuals are available here: . The direct link to the 2090S manual is here: . This is the English version of the manual and applies to the 2000S and the 2200T as well.

I hope this helps.

Cindy Wells
(note you will need Adobe Reader or a similar program to read the file.)

Oct 07, 2011 | Navigon 2090S Car GPS Receiver

1 Answer

My Navigon GPS T2200 has message "Failed to get

If you turn it off and then turn it on it should work. If it so frozen that you can't turn it off, Then unplug it from the power source the so it has to turn off. Then wait an hour or so and then turn it on. Kinda like rebooting a coumputer
Regards, obliqueridge

Nov 12, 2010 | Navigon 2200T GPS Receiver

1 Answer

How do I get a User Manual for my Navigon 2200T

No further help is needed. I found the manual at a different internet site.

Dec 25, 2009 | Navigon 2200T GPS Receiver

1 Answer

I have navigon 7100. Whenever I inputted information it takes a long time to response despite having a signal

That is typical of navigon. Based on Consumer Reports, it is THE slowest GPS to sync and recalculate...on the market.. Up to 5 minutes on some tests....

Nov 27, 2009 | Navigon 7100 GPS Navigator GPS Receiver

1 Answer

I can't find a battery replacement for my navigon 2200T? Found a place in Hong Kong but they sent the wrong one even after I gave them P/N and S/N.

I too have a Navigon and suggest you go to their website, probably They can sell you a battery. If not, go to and key in Navagon.

Oct 25, 2009 | Navigon 2100 Portable GPS Receiver

1 Answer

Navigon iphone 3g no signal

I am using Navigon on the iphone cant get a GPS signal please can you adv

Aug 05, 2009 | Navigon 5100 GPS Navigator Handheld GPS...

1 Answer

I get message: "Failed to get path to MobileNavigator!"

your maps are not set up correctly. The unit expects to find thed data in a specific place and that place is empty or does not exist

Jul 27, 2009 | Navigon 2200T GPS Receiver

1 Answer

Why does my GPS system have a difficult time locating satellites?It says ''acquiring satellites'' for about 5 minutes. Then it says it can't locate satellites. Should it continue trying? Why does it do...

this is what my navigon says about gettting the gps to connect.

Initializing the GPS receiver
In the upper right-hand corner of the display, the GPS symbol appears. As soon as
data from at least 3 satellites is received, the symbol changes to (GPS Ready). Note: If possible, position the device with a clear line of sight to the sky to successfully
receive messages from the GPS satellites.
Note: GPS initialization requires data from at least three satellites. If GPS data is not
available, the receiver will not initialize.
Note: It can take up to 20 minutes to initialize the integrated GPS receiver for the first
Note: Each time you turn on the device, GPS receiver initialization begins. When GPS
data is available, reception starts within one minute.
If the navigation device has been switched to standby for more than a week, the next initialization
can take up to 10 minutes.

Jun 19, 2009 | Garmin GPS

Not finding what you are looking for?
Navigon 2200T GPS Receiver Logo

Related Topics:

956 people viewed this question

Ask a Question

Usually answered in minutes!

Top Navigon GPS Experts


Level 3 Expert

76649 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers


Level 3 Expert

587 Answers

Are you a Navigon GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides