Question about HHB CDR850 CD Recorder
Most of the time it works fine, but sometimes after recording for maybe 20 or 30 minutes it stops and says new disc or something
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Noise / Hum in recordings
hi, i once had the same problem with a kenwood cassette deck. it would play pre-recorded tapes perfectly but when it came to recording from another source i would get an annoying hum when playing back the recording, the fault turned out to be a faulty earth connection on the phono connectors on the rear, they were dry jointed and once resoldered the unit worked and the recordings were perfect. maybe you have the same problem? hope this helps?
Posted on Feb 21, 2009
The HHB CDR850 is identical to the Fostex CR300. They are both made by Pioneer, based on the PDR-555RW. The Fostex service manual is available free in pdf at the Fostex Usa website. Scroll down and select the service manual for model CR300.
Posted on Jul 06, 2009
SOURCE: we ejected the cd accidentaly
did the power fail during recording?
have you tried putting the cd back in the machine?
you should be able to finalise it as long as the PMA completed
the disc wont come out normally untill the PMA rec message finishes.
i have this machine myself.
there is a mode that will scan a disc if the PMA is missing
if power was turned off during recording it usually enters a "REPAIR" mode when turned on again.
this takes 40 mins to complete but the audio can be finalised as normal after it completes.
try putting the disc back in and see if it can be repaired or finalised
Posted on Nov 26, 2010
Tips for a great answer:
Mar 05, 2012 | HHB CDR850 CD Recorder
Because the disc was left in the unit after recording and the power plug was unplugged later, the track number and
recording time data have been cleared without being recorded on the disc.
While "REPAIR" is displayed, the track number and recording time data are repaired by tracking the recorded area. Further
recording or finalization is possible when the display returns to the previous condition. Tracking the recorded area takes about 40 minutes if the disc has been fully recorded.
Jan 29, 2011 | HHB CDR850 CD Recorder
Nov 14, 2010 | HHB CDR850 CD Recorder
Aug 07, 2010 | HHB CDR850 CD Recorder
Jan 08, 2010 | HHB CDR850 CD Recorder
Feb 14, 2009 | HHB CDR850 CD Recorder
Dec 26, 2008 | HHB CDR850 CD Recorder
May 26, 2008 | HHB CDR850 CD Recorder
Aug 14, 2007 | HHB CDR850 CD Recorder
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: