Question about Measuring Tools & Sensors
How to put back metal cover on mini mac 310 chainsaw
Which cover do you meen!if you meen the one thats covering the clutch and the chain you must have the chain brake on if it dosent vork put it in off position i dont remember but if The brake is in wrong position it may be inpossible to put the cover back.
Posted on Feb 16, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I think the pre-adjust settings are to turn jets in all the way and back out 1.5 turns each. then:
You will find a Low and High adjustment screw. At idle turn the screw in or clockwise until the rps starts to decrease. Then start turning it out till you hit max idle rpms. Turn screw back in a quarter to half turn and it should be idling smoothly. Be careful here and get someone to hold saw if necessary but hold in throttle to full speed and do the same with high adjustment screw. turn it in till rpm starts to drop then back it out until you get to max rpm and it won't go any higher then turn it back in a half a turn.
Posted on Jun 08, 2009
If you need the parts manual for that saw, heres a link:
Posted on Feb 08, 2011
Tips for a great answer:
Apr 13, 2014 | McCulloch Garden
Oct 17, 2013 | McCulloch Power Mac 310/320/330/340 Chain...
May 01, 2013 | McCulloch Mini Mac 6, Power Mac 6 Chainsaw...
Apr 28, 2013 | McCulloch Power Mac 310/320/330/340 Chain...
Mar 30, 2013 | McCulloch Power Mac 310/320/330/340 Chain...
Nov 01, 2012 | McCulloch Power Mac 310/320/330/340 Chain...
Oct 28, 2012 | McCulloch Power Mac 310/320/330/340 Chain...
Aug 22, 2012 | McCulloch 1975 Mini Mac 35 Chain Saw Sales...
Aug 11, 2012 | McCulloch Garden
Mar 17, 2009 | McCulloch Garden
69 people viewed this question
Usually answered in minutes!