Question about Indesit 24 in. DI67 Free-standing Dishwasher

1 Answer

Indesit Di 67

Stops mid cycle beeps and then the 2nd light (wash) light flashes.



Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers
Re: Indesit Di 67

Tilt your washer forwards. Water will leak from the front but once this has cleared your dishwasher should be ok again. I paid an engineer to come and tell me this. If your dishwasher is not completely level this can sometimes happen. Hope this helps.

Posted on Jan 15, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Indesit DIF04UK: Help with problem determination please?

Modifying a wash cycle in progress:

If a mistake was made during the wash cycle selection process it is possible to change the cycle, provided that it has only just begun: open the door, taking care to avoid the escaping steam, and press and hold the ON/OFF button; the machine will switch off with a long beep. Switch the machine back on using the ON/OFF button and select the new wash cycle using the SELECT WASH CYCLE button; start the cycle by closing the door.



Sep 08, 2014 | Indesit Dishwashers

1 Answer

My top dishwasher drawer won't finish through the cycle. It runs fine on rinse only but not any of the wash cycles. It stops mid cycles, beeps like it has been paused, then tries to start again

Try to feel the temperature of water inside the dishwasher. If it is normal room temperature for the hot wash cycles then it is likely the heater is faulty.
It is not easy to replace unless you have good experience with repairing dishwashers.

Jan 17, 2013 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

Hi Indesit IDL700 Dishwasher. Stopped mid cycle by

The main processor was interuppted and so has hung up or is faulty. Remove the main plug and press on the control pad of the washing machine to drain off any residual voltage that is remaining on the main board and which seems to have hung up the processor.When the plug is plugged in and switch please hold down the start/stop button.
If there is no result after plugging in the machine then the main controller board is a suspect. You can remove the control board and check the connectors, check the main door switch , if possible clean the connectors/ contacts as a last chance.

Sep 05, 2011 | Dishwashers

1 Answer

My Mezzo MDW012 dishwasher stops when going to the 2nd phase of a cycle...It doesnt matter which cycle it does this on all of them

I have the same problem.. Have run several cycles in all configurations and stops during the wash cycle with the first 3 lights remaining on after beeping stops.. did you manage to solve?

Oct 15, 2010 | Dishwashers

1 Answer

The wash light Indesit DI 67 dish washer is flashhing ?

Try pressing the start button in for 5 seconds, doing this cancells the old program and starts a new one.

Dec 12, 2009 | Indesit 24 in. DI67 Free-standing...

1 Answer

Indesit dishwasher DI 450 stops after 10 mins

my disher washer dls 535 starts programme then lights 2 and 3 start flashing and does not work

Nov 19, 2008 | Indesit 18 in. D41 Slim-Line Free-standing...

1 Answer

DI 67 Diswasher trips RCD fusebox

either the element is faulty or poss the electrical filter.

Nov 14, 2007 | Indesit 24 in. DI67 Free-standing...

1 Answer

DI 67 S fault

Try to tilt your dishwasher forwards. Be aware that water will leak out of the front. Once this is clear it should work. I paid an engineer to come and tell me this. If your machine is not completely level it causes it to over fill and after a time will not work. Good Luck

Sep 28, 2007 | Indesit 24 in. DI67 Free-standing...

2 Answers

Indesit D167. When cycle selected no water pumping or filling but 1 & 2 green indicators on.

Tilt your dishwasher forwards. Be aware that water will come out ouf the bottom. Once this is clear your washer should be Ok.
Good Luck

Sep 23, 2007 | Indesit 24 in. DI67 Free-standing...

Not finding what you are looking for?
Indesit 24 in. DI67 Free-standing Dishwasher Logo

Related Topics:

416 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Dishwashers Experts

Ted Maxwell

Level 3 Expert

3515 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

9503 Answers


Level 3 Expert

5934 Answers

Are you an Indesit Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides