Question about ASUS A7N8X-E Deluxe NForce 2 Ultra 400 Motherboard (90M7A770GOUAYOZ)

3 Answers

System restart problem

Unable to understand why the system re-starts while running, it happens frequently

 

 

Posted by on

  • jeevankutten Aug 18, 2008

    I am also having the same problem..

  • reilan_09 Aug 26, 2008

    laging negrerestart yung pc ko, di ko alam kung pano aayusin, wala namang bad sector yung hdd ko, ayos naman yung fan. nilagyan ko na ng foam yung ilalim nung board, pero ganun parin. pano ko yun aayusin?????????

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Commonly,this is a symptom of a failing power supply.Probably one of the power rails is losing power.Replace it before it totally fails and takes other components with it!

Posted on Oct 19, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Check the RAM and most of the cases if this problem arises the reason is this rather than this even if we have a bad clusters in the harddisk at track 0 then also it goes for restarting

Posted on Oct 18, 2007

Ad

My pc restrating problem continusly

Posted on Jul 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't get the oven to restart after power failure; am unable to start clock


Oh dear, this sounds like an electronic digital clock that has suffered from spike damage. You could try disconnecting from the mains, leaving off for 10 minutes and restarting, it frequently works.

Apr 01, 2015 | Ovens

1 Answer

1995 Buick Century. Engine stalls after ~5 minutes when started warm. Engine runs rough for a few seconds before stalling. Happens even at highway cruising speed. Will crank and fire and stall when you...


Using excessive fuel cleaner can damage injectors and the fuel pump - sounds like your problem is the fuel pump bearings, and you will probably have to have it replaced.

Jun 13, 2017 | Buick Century Cars & Trucks

1 Answer

Computer frequently freezes and is very slow to start up


Hi, Do this, click start >click Run(in run type this msconfig and press enter key) and then check(enable) or Uncheck(disable) only you check for start-up your present anti-virus.if finish restart your PC. Update your antivirus and scan your system driver, Use and observer again.

Jul 20, 2011 | Computers & Internet

1 Answer

Software problem


restart your computer the press f8 to go safe mode the remove it, then restart again.. re installed again if the same problem... copy the software to your drive d: then run it

Sep 09, 2009 | Computers & Internet

1 Answer

Starting problem when hot (occasinally when cold)


When this happens try opening the gas cap and retightening. Might be vapor lock.

Mar 19, 2009 | 1997 Plymouth Grand Voyager

1 Answer

Intel Desktop bord D845GVSR with Windows XP hanging frequently


Sometime this happens when you use the drivers on XP you may need to down load the correct drivers and a good place to start is driverguide.com you may need to enter details for free registration

Jan 22, 2009 | Intel Motherboard

1 Answer

F 70 code on the Kenmore elete smartheat HE4


hello Whgispers42,
Huuum At your service!

You said,
We frequently have to start the dryer several times during one load. The dryer will run fine for a while then all the sudden give 3 beeps and then the F 70 code. Sometimes when you go to start the dryer you can press power and the panel will light up for about 3 - 5 seconds and then shut off again, this will happen several times in a row. We have been unable to solve this issue ourselves and are becoming very frustrated since this washer/dryer set are less than a year old. Any help you could offer would be greatly appreciated. (If we are unable to fix this problem soon, it is likely that the dryer will make a sudden leap from the second floor window to the backyard)


Try this first!!
This is an error code.

This can reset the system.
First unplug the washer and wait a 5 minutes then restart it.
It's like rebooting your computer when its acting strange!
Usually it corrects some error problems if they are not serious.
Or they are sometimes just a glitch.

If this does not help, you said the machine is not one year old.
All appliances have a 1 -year warranty and the service and parts are free for that first year!
I hope you succeed with my recommendations.
Please contact me with your progress1

Bless You
PLEASE GIVE ME A GOOD RATING HERE AT FIXYA.COM BEFORE YOU SIGN OFF.

Thank You

Jul 27, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
ASUS A7N8X-E Deluxe NForce 2 Ultra 400 Motherboard (90M7A770GOUAYOZ) Logo

Related Topics:

471 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

David
David

Level 3 Expert

781 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...