Question about Yamaha RX-V663 Receiver
It will play audio on tuner and tv but not on v-aux or dvd.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi and welcome to FixYa,
Initially, a workaround:
Good luck and Thank you for using FixYa. Happy Holidays.
Posted on Dec 20, 2008
I had this issue once before, recheck all the conenctions on the tv, and make sure that the HDMI plug in for the TV * if its the older model * make sure it is placed to HDMI not TV.
Please let me know how it goes,
Please rate me
Posted on Jan 07, 2009
Okay...my first contribution to any forum but I have the same problem (Yamaha RX-V663 and Samsung Blu Ray) and found the solution. The problem is you probably have your HDMI cables from your DVD player and reciever connected to a DVI input on your TV. The DVI may have problems communicating--not HDCP compliant. My system was working great then I hit a button on my remote...just playing around. I think it was the pure audio and I turned off the receiver. After that, the audio worked but there was no video. After many frustrating hours, the fix was to unplug the HDMI and DVI cable then turn the power off, cycle the power again, and plug the HDMI and DVI cables back in (the DVI was the last cable plugged in, not sure if that matters). By unplugging everthing you've reset the communication between the HDMI components and the DVI TV.
See page 18 of the yamaha owners manual, second to last note on bottom right of the page. It says there may be a problem...
I also noticed that the yamaha reciever was sending 1080p (my older tv is 1080I) and that is why the video wouldn't display on the TV. You can see this in the video signal info screen, unfortunately there is no setting to switch it back, just recycle the cables and power and it should reset.
Uncredibly frustrating but I got my picture back!
Posted on Jan 10, 2009
To get audio with this set up also hooked up analog audio RCA cables for the audio for each piece of equipment for 2 channel out put. Zone 2 will not out put a digital signal and this receiver will not down convert a audio signals to analog if using digital audio hook-ups.
Posted on May 08, 2009
SOURCE: Yamaha receiver RX-V663
Make sure you have an analog RCA audio cable from the source to the receiver. Digital coaxial or optical will not work for zone 2 or zone 3. By adding an analog cable it will not affect your main zone, it will always go to digital first. Hope this helps
Posted on Dec 29, 2009
Testimonial: "great feedback. "
Tips for a great answer:
Jan 16, 2011 | Yamaha RX-V361 Home Theater Receiver
Jul 14, 2010 | Yamaha RX-V663 Receiver
Feb 04, 2010 | Yamaha RX-V663 Receiver
Dec 29, 2009 | Yamaha RX-V663 Receiver
Mar 23, 2009 | Yamaha RX-V663 Receiver
Jan 07, 2009 | Yamaha RX-V663 Receiver
Dec 19, 2008 | Yamaha RX-V663 Receiver
Dec 01, 2008 | Yamaha RX-V663 Receiver
33 people viewed this question
Usually answered in minutes!