Question about HP GX613AA Pavilion A6300F Desktop PC

1 Answer

Cpu says no input vga signal, then goes to sleep

Have hp pavilion a6300f model and cpu won't boot up...just says no input vga signal..then goes to sleep mode...fans start up but no light on keyboard....how do i go about to fix this? I know the monitor works with other tower, so thats not the problem

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

The no input VGA signal just means that the monitor is not receiving anything from the graphic card on the tower. Is the card a digital (DVI) output card? You'll know by the connector, it's white and slightly wider than a standard VGA connector. If so, perhaps the monitor is set to the wrong input?

If that isn't the case, and the computer is using an on-board or built-in graphics controller, you could try resetting the system's CMOS settings by setting the clear-settings jumper on the system board, or simply remove the plug and CMOS battery for a few minutes. Check the computer's documentation on the exact steps to do this.

Hope this helps!

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NO DVI INPUT SIGNAL AND MONITOR GOES TO SLEEP


you can't run 2 different inputs at the same time. VGA takes prescedence.

Apr 06, 2014 | HP L1950 Monitor

1 Answer

Boot up hp pavilion a1340n and get no vga signal


Have you checked , verified monitor cable, pins bent? You can try a PCI or better a PCI e Graphic Card. Does it boot? Have you tried another monitor?

Dec 25, 2012 | HP Pavilion a1340n PC Desktop

1 Answer

Monitor went to sleep, and there is a beeping noise coming from the tower is it a virus. It said no input signal?


For that first clean dust from all parts of motherboard.After removing cover of cpu reconnect RAM memory.Reconnect processor and it's fan. Make sure miotherboard is not ground with cabinet cover. Reconnect pci or vga card if any. Then check. Let me know if you need further assistance. Thanks for using FixYa.

Feb 12, 2011 | HP Pavilion a6000n (882780985018) PC...

1 Answer

Whene my hp a6300f pc is turned on only a black screen is seen


You should see first the RAM modules. eject one and try to start the pc without that. If starts you have to replace that module. If dont, try with the other one. do the same with HDD and each Motherboard periferic (DVD, Card reader etc.)

Good luck!

Apr 19, 2010 | HP Pavilion Desktop a6300f Intel Pentium...

1 Answer

No input signal


that is the problem of cpu not a monitor to confirm disconnect signal cable and power on. monitor will show "no signal check signal cable" it means that monitor is ok and fault lies in cpu .then open the cpu and disconnect ram and listen the beep. contineus beep should be heard then ram is faulty replace it. if no beep heard then motherboard is faulty .

Mar 08, 2010 | HP vs17

1 Answer

Monitor malfunction, says VGA Input: No Signal and goes to sleep


If it was your video card, you would have no picture at all. Try to boot in safe mode and do into your options and make sure your hibernation is not on. Only other thing I can think of, it could be *********** board.


Nov 29, 2008 | HP Compaq Presario SR2011WM PC Desktop

Not finding what you are looking for?
HP GX613AA Pavilion A6300F Desktop PC Logo

1,338 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...