Question about Juicers
I have used more than one socket in the house to try to get the Juicer to operate.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Motor not working
Hi I had the same problem yesterday and emailed Champion Juicer about the problem here's their reply below, his suggestion worked. Hello Duane, Your machine is equipped with a magnetic start system which will only allow the machine to start when you have the screenholder all the way in place just as you would have it to start juicing. If you do not have any parts on the machine it will not start. Please assemble it again and give it a try. If it still wont start call me at 209-369-2154 for further assistance. Thank you Carl
Posted on Aug 16, 2007
SOURCE: juicer no longer works !
the motor uses a tiny fuse in the windings and it might be hard to find and rated up to 15 amps... it blows sometimes for no reason and especially on cold starts.
also the on-off switch wears out.. and lastly the ac cord breaks inside from stretching too much.
Posted on Apr 03, 2008
I have the same problem but no such luck in resolving through customer service for free as suggested. I was told unless the purchaser purchased the extended warranty, the standard was 60 days only.
They were able to provide a complete new base for a tax total of $49.99 inclusive of shipping. This is not such a bad deal relative to purchasing a new one.
If I were to buy one new today though, I think I would research an alternative product since this design is flawed and they obviously are not interested in solving it and producing happy customers.
I am certain there are others that produce a good machine and will stand behind their designs. My internet research revealed many people suffering from this same problem.
I had the customer service rep review this page and thread with me while on the phone and he did not seem to care a whole lot. He further stated that the threaded white piece is not available as a replacement part; only the entire base as priced above.
So anyone researching to purchase a Jack Lalanne power juicer take note of how they stand behind faulty or flawed designs. They are not fully commited to the "outstanding last a life time product" like their marketing implys.
Posted on Aug 09, 2008
Make sure the bottom of the feed chute is not damaged. If it,s chipped or scored, try filing
it down level as best you can. Then with the juicer fully assembled, unlock the set screw
on the center of the bottom and turn it clockwise until the chute contacts the blade, then
back it off a half turn and lock it down. By the way a dull worn blade will produce less
vibration. I'm assuming the lid is plastic.
Posted on Feb 02, 2011
Tips for a great answer:
Sep 19, 2017 | Breville Juicers
Jul 23, 2012 | Acme 5001 Supreme Juicerator Juice...
Jan 07, 2012 | KitchenAid Citrus Juicer
Sep 05, 2011 | Juicers
Feb 08, 2011 | Omega 1000 Juice Extractor
Nov 29, 2010 | Jack Lalanne Power Juicer 250 Watts
Oct 27, 2009 | Jack Lalanne Power Juicer 250 Watts
Nov 26, 2008 | Jack Lalanne KN2047 Juicer
Oct 21, 2007 | Juicelady JL500 Juice Extractor
May 09, 2018 | Juicers
Apr 25, 2018 | Juicers
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: