Question about Dryers
Is it 120 volts or 240 volts dryer
if it not running could be motor,door switch,check if one breaker from 2 is blown
Posted on Jan 16, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
F01 - There may be an internal problem with the control, attempt a Hard Reset.
Hard Reset - In some cases the control can be non-functioning or may not accept activation from the control panel. To clear and restart the control follow the these steps:
* Unplug or turn the circuit breaker off for 30 seconds.
* Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet.
* Press the Pause/Cancel/Stop button twice to clear the "PF" in the display.
* Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts.
The F01 generally indicates a failed electronic machine control board.
This error code can sometimes be caused by a glitch or power surge through the electrical lines.
You may be able to clear this code by unplugging the washer for 5 minutes.
If the code returns after plugging the washer back in, then the electronic machine control board will need to be replaced.
The procedure for accessing and replacing this control board is shown in this image...
Be sure to unplug the washer before accessing internal components.
When you access the control board, I recommend transferring the wires from the old control board to the new replacement control board one connection at a time.
Once you have all of the wires transferred, remove the old control board and mount the new control board in the washer.
Reassemble and test the washer.
The "F01" error code indicates a communication error between the Central Control Unit (CCU) and the EEPROM onboard the CCU.
The "F01" can also be displayed if the onboard "Pump Driver" fails to activate.
Generally in order to correct this failure will require replacing the CCU.
There is no way to test and verify if the control board has failed.
The technical data sheet basically states to replace the CCU.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Posted on Sep 25, 2010
Tips for a great answer:
Feb 04, 2016 | Sears Kenmore Elite Electric Dryer 69278
Dec 12, 2015 | Kenmore HE5 Electric Dryer
Jan 16, 2015 | Kenmore Dryers
Feb 23, 2013 | Kenmore Dryers
Oct 04, 2010 | Kenmore 67082 Electric Dryer
Aug 03, 2010 | Kenmore Elite HE4 Electric Dryer
Dec 23, 2009 | Kenmore 63942 Dryer
Jan 21, 2009 | Kenmore 659 Electric Dryer
Aug 03, 2008 | Kenmore Elite HE4 Electric Dryer
Apr 20, 2018 | Whirlpool Dryers
54 people viewed this question
Usually answered in minutes!