Question about Singer 20U73

1 Answer

Presser foot will not go all the way down

The presser foot will go up but not completely down

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 128 Answers

There might be something stuck in there that is stopping it from pushing all the way down.

Posted on May 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No knob to adjust presser foot pressure. Space between feed dogs & presser foot is too tight to pull a piece of fabric out with foot down. Diagonal seams get pushed out.


You should not be able to pull fabric from the machine when the presser foot is down. The presser foot should always be raised before removing the fabric.

Are you trying to darn or quilt something without the feed dogs activated? If so, there are special presser feet for that purpose that are shorter in height (ie darning foot) which allow more space between the presser foot and the stitch plate so the fabric can be moved freely.

Apr 17, 2015 | Janome Sewing Machines

1 Answer

Presser foot won't go completely down


Have you checked for something stuck in it? Even a small pin can do a lot of damage and jam the spring. Give it a good shake. If you can't get inside, try taking a vacuum nozzle over it.
Fortunately the foot pedal is probably the easiest part of a sewing machine to replace if it is damaged beyond repair..

Mar 10, 2015 | PfaFF Creative 7570

1 Answer

Bernina Virtuosa 150 Presser Foot Loose


try increasing the presser with the adjuster

Feb 10, 2014 | Bernina Virtuosa 150

1 Answer

Presser foot lifter


foot pressure needs adjusting

Feb 10, 2014 | Bernina Sewing Machines

1 Answer

My presser foot lever wont move


it sounds like the machine needs to be serviced

May 28, 2012 | Sewing Machines

1 Answer

I have a 9960 singer machine and am trying to use the buttonhole presser foot for the first time and I can not get it to sew T


the buttonhole foot snaps on to the presser bar, there's a little lever at the back of the presser bar that releases the foot, then put the buttonhole foot down on the needle plate & use the presser foot lifter (number 11) to lower the presser bar down onto the buttonhole foot & you'll hear a click sound when it snaps on & make sure to use the buttonhole lever(number 31) because the machine won't sew a buttonhole unless that lever is pulled down.

Apr 26, 2012 | Singer Sewing Machines

1 Answer

When pressing the foot control the machine won't run, it shows the presser foot blinking on the screen even when the presser foot lever is down.


check the connections, if they are good, your foot pedal has a short in it, so its not completing the circuit when depressed

Jul 15, 2011 | Husqvarna Rose

1 Answer

How do I turn corners with the overlock foot for a Janome 2049?


Sew to the end of the fabric, slowing right down to within a stitch or two of the end, manually turn wheel to complete last two stitches, stop, raise needle, raise presser foot, turn fabric so the back edge of the fabric is just under the needle, drop needle, drop presser foot and resume.

Mar 13, 2010 | Janome 2049LX Mechanical Sewing Machine

1 Answer

Model 6230- presser foot lifter won't move presser foot


That's the problem seized up use a penetrating oil from the top and work it up and down and it should free up

Dec 31, 2008 | PfaFF Tiptronic 2030

1 Answer

Doesn't sew


Hi emnsam....please update your post with the complete Model Number in it's entirety and I will be able to advise you.

Jul 29, 2007 | Husqvarna Rose

Not finding what you are looking for?
Singer 20U73 Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Cindy Wells

Level 3 Expert

5056 Answers

mystery_soul

Level 1 Expert

41 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...