Samsung M2070 wait image

The system initialize error is typically caused by a firmware issue or a hardware problem, such as a malfunctioning sensor or motor. Here are some additional troubleshooting steps you can try:

1. Check the error log: The M2070 printer has an error log that can help diagnose the cause of the system initialize error. To access the error log, go to the printer's menu and navigate to "Maintenance > System Data > Service Report." Look for any error codes or messages that may indicate the cause of the problem.
2. Perform a firmware update: The latest firmware update for the M2070 printer can help resolve any known issues with the printer's firmware. To update the firmware, visit Samsung's website and download the latest firmware for the M2070 printer. Follow the instructions provided to update the firmware.
3. Reset the printer to its default settings: Press and hold the Stop button on the printer for about 10 seconds until the printer restarts. This will reset the printer to its default settings and may resolve the system initialize error.
4. Clean the inside of the printer: Open the front cover and remove the toner cartridge. Use a clean, dry cloth to wipe any dust or debris from the inside of the printer, particularly around the paper path and rollers. This can help resolve any issues caused by dirt or debris interfering with the printer's operation.
5. Check the printer's hardware: If none of the above steps resolve the issue, there may be a hardware problem with the printer that requires professional repair or replacement. Some common hardware issues that can cause the system initialize error include a malfunctioning sensor, motor, or control board.

The printer could be configured incorrectly or not properly been set up . Check the settings and the preferences to be able to print and make sure that all of the print settings are all correct. The printer driver might be not properly installed.

http://download.driversupport.com/lp/bppc/alt?tid=ppc-top-drivers&odmid=463&typeid=8&utm_source=AdWords&utm_medium=PPC&utm_term=samsung%20driver%20printer&utm_content={creative}&utm_campaign=TopDrivers&Network=Search&SiteTarget={placement}&m=Samsung&t=Printer&s_kwcid=AL!4343!10!80470509199952!29392224636&ef_id=WsHXcQAABF6F5eH9:20180404111037:s

Go to Mfg web site or do a Google search.

It sounds like your WiFi is not talking to the printer.

For the M2070FW: Samsung Multifunction Printer Xpress M2070FW

For the M2070W: Samsung Multifunction Printer Xpress M2070W

Look at this link for your printer. The manuals are free with Samsung.
SAMSUNG

reset Samsung SL-M2070/M2070W Samsung SL M2070 M2070W