Question about Computers & Internet

Open Question

Driver detective stopped working

Driver detective was installed. It worked for about two weeks, then an error message appeared indicating that it had stopped working. I uninstalled it and reinstalled it but it still does not work. Any ideas for me to pursue to correct this problem?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

nylo
  • 37 Answers

SOURCE: Modem busy 797 error on Vista.

hello sir, this might be an driver issue since u have reinstalled the modem.the modem might have came with some driver installer cd.so plz check the driver and install the driver by inserting the cd and searching the driver from cd.

Posted on Oct 27, 2007

Soulvisitor
  • 1113 Answers

SOURCE: Driver install cannot detect printer

Disconnect printer cable, delete drivers, install driver, connect only when driver software prompts to do so.

Lexmark Vista 1180 driver link

Posted on Nov 24, 2007

  • 243 Answers

SOURCE: i cannot reformat my pc windows xp,there's an error

If you are getting an error during installation its not good :(

Its prob either yor ram or hard drive faulty. Download memtest and test ram 1st as thats the most likely cause. Check that optimised defaults are loaded in bios also.

Posted on Jan 26, 2008

ButtFuzz
  • 463 Answers

SOURCE: Consent UI for administrative applications has stopped working.

OS? Sounds like UAC is turned off.

Posted on Feb 27, 2009

  • 1257 Answers

SOURCE: Drive not working--error code 39

Follow this article to fix the issue.100% Guaranteed

http://social.technet.microsoft.com/forums/en-US/itprovistahardware/thread/bd9763de-6141-45ea-990b-70c207fe3fb6

Posted on Mar 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

E7 error message Singer Patchwork


I used can air and blew out the reverse button area. Worked immediately after turning off and back on.

Mar 23, 2014 | Singer 7258 Sewing Machine

1 Answer

My webcam stopped working, and i thot it was my driver but i tried installing a webcam driver but i did not work and displayed a message saying, "webcam not detected, webcam will close"


Hi sezhou1,

I see that your webcam is not detected on your laptop.

If I may ask did you reinstall a different version of Windows on your machine?

you also mentioned that you tried reinstalling the driver but to no avail, you only got an error camera not detected, that error sepcifies that the camers is non-functional or not repsonding anymore, either due to it stop from working or could be a failure on the device itself.

A device giving an error can be caused by a different instalaltion of Windows version or can be caused by corruption of drivers on the machine and the device was forced to work till the camera just siezed from working.

Most of the time replacing the device is the only option to this kind os situation, sometime reinstalling the original wersion of the windows that was pre-installed on the machine may make it work.

I hope that this can help.

Have a nice day,

mvincentc

May 06, 2011 | HEWLETT-PACKARD 620 XT964UT Notebook PC

1 Answer

I'm having a problem installing the SetPoint 4.0a2. When in the process of installing, a window pops up and says that "the installer has detected a newer version of the SetPoint software on this system. ...


Please go to "Device manager and remove all of the USB driver and select Scan for hardware change. After installing the usb driver connect the USB and install the software.

Aug 05, 2010 | Logitech Cordless TrackMan Wheel...

3 Answers

Error: Webcam driver open fail. Problem with Satellite A305D


Hi,
sounds like driver related problem, download this tool: Driver Update Software for XP Vista 7 8 update your drivers, and won't be any problem.
Jim

Jun 15, 2010 | Toshiba Satellite A305-S6845 Notebook

1 Answer

STOP C0000221 erro de hardware desconhecido systemroot system32 ntdll.dll


You may receive one of the following stop error messages while working on your Windows XP computer.
STOP: C0000221 unknown hard error
Path\File_nameSTOP: 0xC0000221 unknown hard error
C:\Winnt\System32\Ntdll.dll (or another specific file or driver)
STOP: 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
Path\File_name
Note: The error message may be discussed in many different formats-blue screen or message box. It depends on when the corrupt file was detected.
Similarly, you may receive the following STOP messages when a critical system file fails to load on your Windows NT and Windows 2000 computer.
STOP: C0000221 unknown hard error
<path>\<file_name>STOP: 0xC0000221 unknown hard error
c:\winnt\system32\ntdll.dll
Note: Some other drive may also be given in the message.
On Windows 2000 the following error message may display:
STOP: 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
<path>\<file_name>
You usually face this problem when an incorrect driver for one or more hardware is installed on your system. For instance, the error messages described above are displayed when you install a millions of instructions per second (MIPS) driver on a x86 system.
Cause of the Error
This error occurs if the file given in the error message is damaged.
Your Windows XP operating system checks the following files for integrity during system startup:
  • All driver files, excluding the files that loaded using the system loader to start your system .
  • All DLL (Dynamic Link Libraries) on the system. These include, Graphics Driver Interface (GDI), User, Ntdll, Crtdll, Shell, Kernel and several other DLL files on the system.
  • On Windows NT and 2000 computers, all DLLs loaded in the Window server address space are also checked.
The problem may also occur if an Iomega Zip drive is connected to the same cable as your hard disk drive.
Resolution Method
You can resolve this issue by removing the corrupt driver from your computer and then reinstalling a fresh and healthy copy of the driver. You may need to use the Device Manager utility to remove the driver. It is recommended that you clean your registry with the help of a reliable tool, such as RegGenie to ensure that all entries related to the uninstalled driver are removed from the system. After you have completely removed the corrupt driver, restart your system and install a fresh copy of the driver on the system.
If this step does not resolve the problem, you may have to reinstall Windows XP.
It is recommended that you regularly clean your registry with the help of a registry cleaner tool and perform antivirus and antispyware scan using tools, such as Antivirus Plus and StopZilla to prevent such errors from occurring on your system.

GOOD LUCK :-)

Feb 03, 2010 | Intel Computers & Internet

2 Answers

Installaion error


First make sure thats what you want to do since xp is no longer made. If you still want to go ahead you have to make sure you have the complete install and directions. You will have to remove vista first. But check the specs if you bought the computer with vista already installed you will not have the right drivers in your computer to go backwards in versions. Good luck. The reason the error comes up is that the install is trying to remove a component that is needed for your computer to operate. If you had xp and updated to vista, depending on how it was installed it would have removed the xp driver when updating.

Sep 05, 2009 | Foxconn K7S741GXMG-6L Motherboard

1 Answer

BSOD- STOP error message


most bios updates are found on the compaq website, they need to usually uncompress to a 3.5 floppy or they are auto-installing programs u get from the website, your issue however sounds to me more like a corrupted version of windows, did you try a fresh installation with the recovery cds or master disks?

Aug 12, 2008 | Intel Motherboard

1 Answer

I cannot reformat my pc windows xp,there's an error


If you are getting an error during installation its not good :(

Its prob either yor ram or hard drive faulty. Download memtest and test ram 1st as thats the most likely cause. Check that optimised defaults are loaded in bios also.

Jan 26, 2008 | Microsoft Windows XP Professional With...

1 Answer

Printer port


Try to re-install the printer from scratch...

Delete the existing printers from your system.

I.E. Go to add remove printer and follow the instructions.

Ensure your printer is connected.

Jan 14, 2008 | Canon PIXMA iP1600 Printer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...