Question about Mitsubishi VS-60609 60" Rear Projection Television

Open Question

The inside coatin on my flat screen tv is flaking off, can i spray a new coating on it myself

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Paint flaked off. How to repaint?

Scrape off any loose paint. Sand it down, removing any rust. Use an enamel spray paint primer first. Then finish with a good quality exterior spray paint like rustoleum. Put on a few thin layers of paint allowing it to dry between coats.

Feb 21, 2016 | Garden

1 Answer

Spot in tv

The spot may be from debris inside the chamber of the TV box. A bug, dust speck, or other material can attach to the inside screen or on a color tube inside of the unit. Do not touch the inside of the Front Screen as it has a special coating and you could damage the screen permanently. Avoid washing with water or sprays that can enter the frame of the screen. Use a cloth with cleaner applied to it and wipe clean, then dry with a soft rag or paper towel.

Mar 17, 2014 | Hitachi 50VS69 50" Projection HDTV

1 Answer

My mate cleaned my sony bravia 3d tv screen with ' Mr Sheen ' spray and now the screen seams to always have oily splotches no mater how many times i clean it, the picture seams not the same

It ate some of your coating off of the panel. Sorry, your stuck with it.
Never use cleaners on your flat screen. Luke warm water and a lent free rag is the way to go.

Jun 22, 2012 | Sony BRAVIA Televison & Video

1 Answer

It statrted off on screen, with just a few tiny white dots now there is probably 30, i cleaned the lamp mirrow and screen, but i think i just gain another spot, and suggestion ?

Hi, it could be the actual lamp that is starting to fail or you have damaged the mirror with some kind of cleaning fluid either that or the mirror is starting to loose it's coating.

look closely at the mirror when the tv is off perhaps with a torch and a magifiying glass, you may see little pits or flakes on the mirros surface. in this case there is nothing you can do apart from replace the mirror if you can get one.

hope this helps


Feb 10, 2011 | Mitsubishi Televison & Video

1 Answer

My tent has served me well but recently parts are starting to fall off. When I shake the outer cover dry there are lots of flakes that look like glue. 3 of the velcro attachments to the outer part of the...

Hi, the flakes you're referring to is the original weatherproofing that was applied by the manufacturer. This coating can be reapplied using a spray on product that is purchased at most camping outfitters. Before you spray, give the cover a gentle wash to clear any dirt and grime. Then using a mild abrasive pad, gently lift away the flaking weatherproofing. Spray the new coating as per product instructions.

Nov 17, 2010 | The North Face Tadpole 23 Tent

1 Answer

Our Whirlpool Refrig GD25DFXFW02 is working fine our problem is the ice maker , the cubes contain white flakes, is there a coating on the ice maker that could be chipping off> We have changed the filter...

The inside coating has come off the inside of the ice maker . The white " flakes " is calcium deposits , sticking to the exposed cast metal , inside the ice maker , and sticking to the cubes , after water freezing in the mold . You need to replace the ice maker .

Nov 02, 2009 | Whirlpool ED2FHEXN Side by Side...

1 Answer

I have several sandwich toasters but the Tefal coating keeps flaking off. I want the know where I can buy spray-on Tefal coating to re-cover the toasting surface?

Don't use the spray on teflon. It will kill you. It is used as an industrial coating but it isn't food grade. You would be safer, using wheel bearing grease to cook your food. The problem with nonstick cookware is, once it starts to break down, there's nothing you can do except either replace the item or scour it off and use a cooking spray.

Jun 28, 2009 | Breville Kitchen Appliances - Others

1 Answer

Tint on plasma tv screen has come off in patches! Help!

unfortunately the process cant be reversed. the glass filter have (which is in plastic material) has to be replaced by a new one. it is recommended to clean the screen using micro-cloth only.

Mar 19, 2009 | Panasonic Televison & Video

1 Answer

Bottom of GE interior door microwave is burnt/rusted

just use sand paper to clean the rust then use some high temperature paint (sold in tins) eg spray paint but it must be labeled high temperature and spray 2 to 3 coats . your microwave should be safe again

Nov 17, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Mitsubishi VS-60603 60 in pink spot

I have seen this before, and I can only describe it as a flaking of the phosphorus coating in one of the picture tubes. If you can, remove the back such that you can take a flashlight and look down into the 3 picture tubes. If you see any flaking or dark spots in the phosphor, there will be a spot on the screen missing that color. Unfortunately, this is not repairable, as all 3 tubes would need to be replaced (like replacing all 4 car tires when one is completely bald) and that would cost more than a new TV.

Jun 06, 2007 | Mitsubishi VS-60603 60" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-60609 60" Rear Projection Television Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1210 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides